Hi, long time no see. I did build a filo with default config. ( make & make ) serial debug message is like below. But I can't type any command.VGA Console prompt has also the same problem.My Board is likely to EPIA 5000. Does FILO use only PS/2 keyboard as Input Device Driver?FILO !!! Good Id
Hello!! Have you seen any ps/2 problem on EPIA ?If you have PS/2 mouse & keyboard at same time on EPIA, mouse moving makes problem for ps/2 working. After that , keyboard also didn't work.If you use gpm for mouse, both of mouse & keyboard didn't work. And If you unload gpm, keyboard buffer dat
Hello Mark !!
My EPIA finally works. You are right! I saw on my EPIA what is the capture file attached on last mail. So as far, I have used mkelfImage-2.0, but it didn't work. By the way, yesterday I just used mkelfImage-1.16 which is the same as you.Then it worked. What's the problem ?I do
Hello Mark!
I modified src/Config while building the etherboot executive. I removed -DPCBIOS flag and added -DLINUXBIOS.Do I need anything else to modify for linuxbios on Epia ?Also, May I ask you a question about other topic ? The PCI configuration space values in vt8601/raminit.inc seems st
As Mr. Mark and Mr. Andrew said, I got new kernel wich 2.4.19 from cwlinux.( kernel-source-linuxbios-2.4.19-CWLINUX_4.i386.rpm and also official linux-2.4.18.tar.gz )and, select C3 as the processor type and disabled SMP.Then I set PCI access to DIRECT, network card to VIA Rhine.But , Unknown bo
Hello Mark!HOWTO/EPIA documentation says,"Step a) Grab the source for your favorate version of the linux kernel Configure as required make dep bzImage".So just to find out if the kernel starts or not, I got my kernel image from redhat 7.1, of which version is 2.4.2 and ignored kernel configurai
I have epia board. I had followed the HOWTO/EPIA Documentation.But The debug messages are like this below.What's wrong? I use a ROM Emulator.And I use mkelfImage from freebios/util/mkelfImage/.Please, Help me!!=LinuxBIOS-1.0.0 Tue Mar 18 21:
7 matches
Mail list logo
