Hi Ron, Luc,
Quoting Ronald G. Minnich [EMAIL PROTECTED]:
On Sat, 4 Dec 2004, Luc Belliveau wrote:
Here is the output from lspci on my board
*00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo
ProMedia] (rev 05)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP]
with all this talk on the list about epia.. does anyone knwo off hand how to
change this wait 4 seconds reboot to instantenous reboot when I press the on
button?
you mean machine is on, and you want it to cycle real fast?
yeah. When I was looking over sis chipset docs I saw that you could setup
a
On Mon, 6 Dec 2004, Adam Sulmicki wrote:
however, lokoing over vt82c686 docs seems like there's no corresponding
capability :-(
don't give up.
If VIA has wired a GPIO pin to power control, then it might still be
possible. Not sure.
ron
___
Same thing, with one small difference... I turned debugging on and this
is what I get :
find_ide_controller: found PCI IDE controller 1106:0571 prog_if=0x8f
find_ide_controller: primary channel: native PCI mode
find_ide_controller: cmd_base=0x0 ctrl_base=0x0
ide_software_reset: Waiting for ide0
ok, just double check that your ide is right, and can somebody send me an
lspci for these boards? I don't have one handy.
Finally, I do know that native ide mode was always buggy on this part. Is
that a possibility here?
ron
___
Linuxbios mailing
Here is the output from lspci on my board
*00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia]
(rev 05)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP]
00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge]
(rev 10)
00:11.1 IDE interface:
On Sat, 4 Dec 2004, Luc Belliveau wrote:
Here is the output from lspci on my board
*00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP]
00:11.0 ISA bridge: VIA Technologies, Inc. VT8231
with all this talk on the list about epia.. does anyone knwo off hand how
to change this wait 4 seconds reboot to instantenous reboot when I press
the on button?
sh-2.05b# cat /proc/cpuinfo
vendor_id : CentaurHauls
model name : VIA Samuel 2
sh-2.05b# /sbin/lspci
pcilib: Cannot open
On Sat, 4 Dec 2004, Adam Sulmicki wrote:
with all this talk on the list about epia.. does anyone knwo off hand how to
change this wait 4 seconds reboot to instantenous reboot when I press the on
button?
you mean machine is on, and you want it to cycle real fast?
we need to figure out
You can enable debug in filo. Also add some printf in ide_disk.c
YH
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Luc Belliveau
Sent: Saturday, December 04, 2004 9:32 AM
To: Ronald G. Minnich
Cc: [EMAIL PROTECTED]
Subject: Re: epia problem/Epia status
Ron,
Consider me Pre-Pinged !
I've already e-mailed Luc and the list, I guess you haven't caught up
with your
e-mail yet :-)
There is definately a need to add the following 2 lines to
mainboard/via/epia/Options.lb
use CONFIG_CONSOLE_SERIAL8250
default CONFIG_CONSOLE_SERIAL8250=1
Current
On Fri, 3 Dec 2004, Luc Belliveau wrote:
Oh, ok. I just tried an etherboot payload, and that loads. So it must be my
FILO config. .. I don't even get the boot: prompt.. I'm going to try the
etherboot ide_disk maybe and and see what that does.
wow. Usually here it's always etherboot
yes, that could help.
Thanks
Luc
Ronald G. Minnich wrote:
On Fri, 3 Dec 2004, Luc Belliveau wrote:
Oh, ok. I just tried an etherboot payload, and that loads. So it must be my
FILO config. .. I don't even get the boot: prompt.. I'm going to try the
etherboot ide_disk maybe and and see what
umm.. ok now FILO loads, but I get IDE channel 0 not found
Ronald G. Minnich wrote:
On Fri, 3 Dec 2004, Luc Belliveau wrote:
Oh, ok. I just tried an etherboot payload, and that loads. So it must be my
FILO config. .. I don't even get the boot: prompt.. I'm going to try the
etherboot ide_disk
On Fri, 3 Dec 2004, Luc Belliveau wrote:
umm.. ok now FILO loads, but I get IDE channel 0 not found
This is a good sign. trust me.
I'll try to build you a better one :-)
ron
___
Linuxbios mailing list
[EMAIL PROTECTED]
15 matches
Mail list logo