hi , all,
I am a postgraduate student of Beijing University of Aeronautics and
Astronautics ( in china , Beijing).
I want to write a BIOS debugger as my graduation article.
My plan are as follow:
1. firstly I want to write a debug stub which is INDEPENDENT of
1. firstly I want to write a debug stub which is INDEPENDENT of specific
Mainchips, and small enough. The stub can set up a basic environment (
such as RAM initialization, uart initialization). It can also
communicate with the develop PC through Serial port,and excute the debug
command
On Tue, 2002-11-05 at 00:56, Peter Stuge wrote:
Currently i am using CF w/ an ATA - IDE adapter. I have not found a way
to write protect my CF data.
Just cut the appropriate bus line?
No, but you can buy CF with a write protect switch (with some
difficulty). It cam up once before on
On Tue, 2002-11-05 at 13:33, zhu shi song wrote:
I got setclock from old mailing lists. Can you give
more comments on the program? If I'll use it to boot
850Mhz celeron, what should i do ?
zhu
You can't use the program to boot to 850Mhz, you have
to boot to linux, run the program with
Do you have quick and clear solution of the problem? I
hope I can use my celeron 850 asap.
I don't know what parameter I should pass to setclock
, and I can't find clock gen info from leadtek or sis
website. Can you give me direct clues?
thanks
zhu
--- ollie lho [EMAIL PROTECTED] wrote:
On
On Tue, 5 Nov 2002, zhu shi song wrote:
Do you have quick and clear solution of the problem? I hope I can use my
celeron 850 asap.
I don't know what parameter I should pass to setclock
, and I can't find clock gen info from leadtek or sis
website. Can you give me direct clues?
I think we
I think this is an excellent idea. I have thought thought about this
myself also.
I was looking at taking kgdb kernel debugger stub and moving it
from the Linux kernel into LinuxBIOS. It would have the advantage that
it could trap some hardware events that cause a reset, which are currently
Greetings,
That seems to be a good idea. It will be important to have a 'safemode' in
case it gets set wrong.
G'day,
sjames
On Tue, 5 Nov 2002, Ronald G. Minnich wrote:
On Tue, 5 Nov 2002, zhu shi song wrote:
Do you have quick and clear solution of the problem? I hope I can use my
To all,
I have been assigned the task of building a bios for our geode sc1200
project using linuxbios. I have downloaded the current cvs snapshot,
and read all the documents I could find. Unfortunately, I don't see any
info on building it for the geode. Can anyone point me in the right
we can help you but there's a price :-)
would you be willing to send me a writeup on How I built for the Geode
sc1200 if I tell you :-)
ron
___
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
On Mon, Nov 04, 2002 at 10:20:28PM -0700, Ronald G. Minnich wrote:
Just cut the appropriate bus line?
nope. then you can't write control registers.
On Tue, Nov 05, 2002 at 12:35:28PM +, Justin Cormack wrote:
Just cut the appropriate bus line?
No, but you can buy CF with a write protect
try freebios/src/mainboard/nano
Paul
- Original Message -
From: John Allen [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, October 06, 2002 3:03 AM
Subject: Geode sc1200
To all,
I have been assigned the task of building a bios for our geode sc1200
project using linuxbios. I
Hi Ron,
I did not bring up the board with the linux bios,
but I finally print a message on the serial port.
I am beginning the linux bios porting now.
I got some questions first :
1 - Does linux bios needs any special memory
mapping, memory settings ?
2 - Do I need to use address translation
On Tue, 5 Nov 2002, Hammond, Jean-François wrote:
1 - Does linux bios needs any special memory
mapping, memory settings ?
no.
2 - Do I need to use address translation on the PCI ?
I can't see why.
3 - Is there any special settings to use a video card ?
(Yes, I got one.) 3D Blaster
On Tue, 2002-11-05 at 21:01, zhu shi song wrote:
Do you have quick and clear solution of the problem? I
hope I can use my celeron 850 asap.
I don't know what parameter I should pass to setclock
, and I can't find clock gen info from leadtek or sis
website. Can you give me direct clues?
Íõº£Ã÷ [EMAIL PROTECTED] writes:
hi , all,
I am a postgraduate student of Beijing University of Aeronautics and
Astronautics ( in china , Beijing).
I want to write a BIOS debugger as my graduation article.
My plan are as follow:
1. firstly I want to write a debug
16 matches
Mail list logo
