This is a followup to the previous write-up (as some information have become outdated):
http://tthtlc.wordpress.com/2011/01/06/unboxing-my-freescale-board-mpc5125<http://tthtlc.wordpress.com/2011/01/06/unboxing-my-freescale-board-mpc5125/#comments> MPC5125 as provided here: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC5125 https://linuxlink.timesys.com/docs/gsg/mpc5125_twr https://community.freescale.com/thread/74066 http://cache.freescale.com/files/soft_dev_tools/software/board_support_packages/TWRMPC5125LinuxBSP.rar?fpsp=1&WT_TYPE=Board%20Support%20Packages&WT_VENDOR=FREESCALE&WT_FILE_FORMAT=rar&WT_ASSET=Downloads&sr=5 http://www.freescale.com/webapp/sps/download/license.jsp?colCode=CWF-MPC512xADS&nodeId=0127260061033202A5621E&location=overview&WT_TYPE=Board%20Support%20Packages&WT_VENDOR=FREESCALE&WT_FILE_FORMAT=iso&WT_ASSET=Downloads&Parent_nodeId=123481170878772616621E&Parent_pageType=overview https://community.freescale.com/thread/127394 http://www.freescale.com/files/microcontrollers/doc/fact_sheet/MPC5125FS.pdf ================================================================================== The following is an attempt to recompile the source codes using ELDK toolchain: https://community.freescale.com/message/342028#342028 I downloaded the following files: - eldk-eglibc-i686-powerpc-toolchain-gmae-5.3.sh - powerpc.sha256 - target.conf - install.sh Then I installed them by doing the following: $ mkdir eldk-download $ cd eldk-download $ mkdir -p targets/powerpc $ wget ftp://ftp.denx.de/pub/eldk/5.3/install.sh $ cd targets/powerpc $ wget ftp://ftp.denx.de/pub/eldk/5.3/targe...pc/target.conf<ftp://ftp.denx.de/pub/eldk/5.3/targets/powerpc/target.conf> $ wget ftp://ftp.denx.de/pub/eldk/5.3/targe...in-gmae-5.3.sh<ftp://ftp.denx.de/pub/eldk/5.3/targets/powerpc/eldk-eglibc-i686-powerpc-toolchain-gmae-5.3.sh> $ wget ftp://ftp.denx.de/pub/eldk/5.3/targe...powerpc.sha256<ftp://ftp.denx.de/pub/eldk/5.3/targets/powerpc/powerpc.sha256> $ sha256sum -c armv7a.sha256 eldk-eglibc-i686-powerpc-toolchain-gmae-5.3.sh: OK target.conf: OK ... $ cd ../.. $ chmod a+x install.sh $ ./install.sh -s gmae -r - powerpc That resulted in 'gmae' selected as the cross compiler toolchain and 'none' selected as the root file system (I'm using LimeOS on the development board). Then I cross-compiled "Hello World" with the following: $ source opt/eldk-5.3/powerpc/environment-setup-powerpc-linux $ powerpc-gcc helloworld.c -- You received this message because you are subscribed to the Google Groups "linuxkernelnewbies" group. To unsubscribe from this group and stop receiving emails from it, send an email to linuxkernelnewbies+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
