Adding of_device_id's for AHB and APB buses used in klondike (APM8018X) in
platforms/40x/ppc40x_simple.c file
Signed-off-by: Tanmay Inamdar tinam...@apm.com
---
:100644 100644 9761206... 7b518ed... M
arch/powerpc/platforms/40x/ppc40x_simple.c
arch/powerpc/platforms/40x/ppc40x_simple.c |2
Add entries in klondike device tree for AHB and APB bus and remove entry for
non-existent OPB bus inherited from legacy code.
Signed-off-by: Tanmay Inamdar tinam...@apm.com
---
:100644 100644 8c94290... 4ff2852... M arch/powerpc/boot/dts/klondike.dts
arch/powerpc/boot/dts/klondike.dts | 167
Adding UART nodes in Klondike device tree file.
Version 2:
Removed unnecessary 'virtual-reg' property from UART node.
Signed-off-by: Tanmay Inamdar tinam...@apm.com
---
:100644 100644 4ff2852... b1e516e... M arch/powerpc/boot/dts/klondike.dts
arch/powerpc/boot/dts/klondike.dts | 22
Adding 16650 UART support in klondike_defconfig for APM8018X SOC
Signed-off-by: Tanmay Inamdar tinam...@apm.com
---
:100644 100644 c0d228d... c35c345... M
arch/powerpc/configs/40x/klondike_defconfig
arch/powerpc/configs/40x/klondike_defconfig |6 ++
1 files changed, 6 insertions(+), 0
In APM8018X SOC, UART register address space has been relocated to 32-bit
data boundaries for APB bus implementation.
Current legacy_serial driver ignores the reg-shift property. This patch
modifies legacy_serial.c and udbg_16550.c to work with above mentioned UARTs.
Signed-off-by: Tanmay Inamdar
Hello.
On 03-04-2012 14:12, Thang Q. Nguyen wrote:
Signed-off-by: Thang Q. Nguyentqngu...@apm.com
[...]
diff --git a/arch/powerpc/boot/dts/bluestone.dts
b/arch/powerpc/boot/dts/bluestone.dts
index cfa23bf..803fda6 100644
--- a/arch/powerpc/boot/dts/bluestone.dts
+++
Am 26.03.2012 21:01, schrieb Richard Weinberger:
If try_module_get() fails, mpc5121_clk_get() might return
a wrong clock.
Signed-off-by: Richard Weinberger rich...@nod.at
---
arch/powerpc/platforms/512x/clock.c |6 --
1 files changed, 4 insertions(+), 2 deletions(-)
diff --git
Hi Joakim,
On Wed, Feb 08, 2012 at 12:39:50PM +0100, Joakim Tjernlund wrote:
I figure, after 2.4.37.12, a public git tree on kernel org which still
receives fixes would be enough.
FYI, I've merged your patches and pushed them along with a few pending
other ones here :
On Tue, Mar 20, 2012 at 9:40 AM, Benjamin Herrenschmidt
b...@kernel.crashing.org wrote:
That is interesting! Are those patches published or otherwise available
somewhere? We are also very interested in enabling Canyonlands
with Radeon KMS!
You will run into additional problems with 460
On Mon, 2012-04-09 at 20:18 +0400, Dmitry Eremin-Solenikov wrote:
As for the patches, you'll have to wait for Tony to respond (I'll
poke
him locally).
Any news on these patches? A dirty and not for the upstream yet
version
would be sufficient for me for now.
I'll poke again..
Cheers,
On 04/03/2012 09:13 AM, dimitar wrote:
Hello,
I hope I'm posting my question on the right place.
Please be gentle to me, since I'm newbie in Linux Kernel.
I'm porting Linux to a custom board based on P4080DS BSP. My problem is
that I cannot understand the configuration of th DPA in the
Hi Sergei,
Thanks for your review.
On Maui, there are 2 separate SATA controllers but they share the same
AHBDMA controller. Each SATA controller is assigned a fixed DMA channel on
the AHBDMA (channel 0 is assigned to SATA controller 0 and channel 1 is
assigned to SATA controller 1).
For the
next-20120405 compiled with mpc85xx_defconfig gives the following:
CC drivers/net/ethernet/freescale/gianfar_ethtool.o
drivers/net/ethernet/freescale/gianfar_ethtool.c: In function
'gfar_get_ts_info':
drivers/net/ethernet/freescale/gianfar_ethtool.c:1751:4: error:
On Tue, 3 Apr 2012 at 18:08, Benjamin Herrenschmidt wrote:
On Tue, 2012-04-03 at 00:20 -0700, Christian Kujau wrote:
Going from 3.3-rc7 to 3.4-rc1 (with make oldconfig inbetween) did not
go well on this PowerBook G4 machine:
Apr 2 15:18:23 [ 8.318816] EXT4-fs (hda6): mounted
14 matches
Mail list logo