Auftrag von Grant Likely
> Gesendet: Dienstag, 30. Juni 2009 18:17
> An: Frank Prepelica
> Cc: linuxppc-...@ozlabs.org
> Betreff: Re: Direct MII connection between MPC8313 and VIRTEX FPGA
>
> On Tue, Jun 30, 2009 at 2:35 AM, Frank
> Prepelica wrote:
> >> What kernel v
On Tue, Jun 30, 2009 at 2:35 AM, Frank
Prepelica wrote:
>> What kernel version are you using?
>
> We are using kernel version 2.6.24. I've searched for "current speed" in
> version 2.6.28.7 and I've found that string.
>
>> Yes, you need to modify the DTB. You have a back to back MII
>> connection
Frank Prepelica
Software Design Engineer
Ubidyne GmbH
Lise-Meitner-Str.-14
89081 Ulm - Germany
> -Ursprüngliche Nachricht-
> Von: Grant Likely [mailto:grant.lik...@secretlab.ca]
> Gesendet: Montag, 29. Juni 2009 17:40
> An: Frank Prepelica
> Cc: lin
On Mon, Jun 29, 2009 at 2:23 AM, Frank
Prepelica wrote:
> Hi Grant
>
> Thanks for your response!
>
> I have searched for "current-speed" in drivers/net/fec_mpc52xx.c but I cannot
> find anything. However we are using the gianfar.c Ethernet driver.
> Do you know whether this driver supports fixed M
eat Müller
Dipl. Ing. Mike Levis
> -Ursprüngliche Nachricht-
> Von: Grant Likely [mailto:grant.lik...@secretlab.ca]
> Gesendet: Donnerstag, 25. Juni 2009 22:06
> An: Frank Prepelica
> Cc: linuxppc-...@ozlabs.org
> Betreff: Re: Direct MII connection between MPC8313 and VIRTEX
On Thu, Jun 25, 2009 at 9:11 AM, Frank
Prepelica wrote:
> Hi all,
>
> we removed the ethernet PHYs (MARVELL) from our customized board (based on
> MPC8313ERDB) and
> connected the CPU Ethernet lines directly to a FPGA which is now emulating
> the PHY. But the ifconfig
> command cannot find that e
Hi all,
we removed the ethernet PHYs (MARVELL) from our customized board (based on
MPC8313ERDB) and
connected the CPU Ethernet lines directly to a FPGA which is now emulating the
PHY. But the ifconfig
command cannot find that eth device anymore. Does the emulated PHY needs to
provide MDIO
in