Hi all.
I saw that someones trying to work on a custom board based on mpc5200.
I have:
* u-boot 1.2.0
* kernel 2.6.21
* arch=powerpc
* custom dts based on lite5200b.dts
* USB port (USB2) configured on the Ethernet port
Is it necessary to combine Ethernet and usb nodes?
However this is the log
Angelo wrote:
Hi all.
I saw that someones trying to work on a custom board based on mpc5200.
I have:
* u-boot 1.2.0
* kernel 2.6.21
* arch=powerpc
* custom dts based on lite5200b.dts
* USB port (USB2) configured on the Ethernet port
Is it necessary to combine Ethernet and usb nodes?
On Freitag, 5. Dezember 2008, [EMAIL PROTECTED] wrote:
Now plugging-in USB:
[EMAIL PROTECTED]: ~ #[ 17.228078] hub 1-0:1.0: state 7 ports 2 chg evt
0004 [EMAIL
The attachment is from Freescale and shows how the divider works.
--
Jon Smirl
[EMAIL PROTECTED]
fractinal_div.pdf
Description: Adobe PDF document
___
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
Smirl [EMAIL PROTECTED]
Oggetto: Re: R: Installation on a MPC5200 based custom board
A: Juergen Beisert [EMAIL PROTECTED]
Cc: linuxppc-dev@ozlabs.org, [EMAIL PROTECTED], Gary Thomas [EMAIL
PROTECTED], [EMAIL PROTECTED]
Data: Venerdì 5 dicembre 2008, 20:33
The attachment is from Freescale and shows
On Fri, Jul 11, 2008 at 06:07:54PM -0400, Sylvain Lamontagne wrote:
Greetings
We are currently trying to put a Kernel 2.6.26 on a custom board based
on the MPC5200 processor and the designed of the board was based on the
lite5200b evaluation board.
We would like to have some advice
Greetings
We are currently trying to put a Kernel 2.6.26 on a custom board based
on the MPC5200 processor and the designed of the board was based on the
lite5200b evaluation board.
We would like to have some advice regarding the installation process for
this kernel. The hardware currently work