We have a board similar to the MPC8323 rdb. In the board we have connected the IDSEL to AD18 & we have only one minipci connector for it. We have interfaced a Wlan Card . When we do
# lspci -x we get following 00:12.0 Network controller: RaLink RT2561/RT61 802.11g PCI 00: 14 18 01 03 07 00 10 04 00 00 80 02 08 80 00 00 10: 00 80 00 90 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 01 06 00 00 14 18 61 25 30: 00 00 00 00 40 00 00 00 00 00 00 00 13 01 00 00 In our circuit INTA is connected to IRQ4 . We are unable to transmit thro this card. We are not getting any interrupts.We want to make sure where to give the mapping of interrupts ? how to give that for IDsel AD 18, INTA should be mapped to IRQ4 . Is it that we need to change the dts file & create a new dtb? if so where to get exact meaning of how to configure "interrupt mapping" in the dts file Regards Praveen
_______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev