So are you saying linux should be writing the irq number to the
INTERRUPT_LINE config reg? This is what I expected but I do not see
it.
No it won't necessarily touch it, this is not terribly useful anyways.
Linux will assign an interrupt based on the informations from the
device-tree and
Hi Jeff,
I'm trying to get interrupts working for my PCI device on a 460ex and
am having problem. My ISR never triggers.
I'm new to PCI(and ppc) and LDD said that I could read the config reg
INTURRUPT_LINE to get the interrupt assigned to my PCI device. Well,
this always reads zero.
On Thu, 2009-12-03 at 09:11 -0800, David Hawkins wrote:
Hi Jeff,
I'm trying to get interrupts working for my PCI device on a 460ex and
am having problem. My ISR never triggers.
I'm new to PCI(and ppc) and LDD said that I could read the config reg
INTURRUPT_LINE to get the interrupt
On Thu, Dec 03, 2009 at 11:52:25AM -0800, David Hawkins wrote:
Hi Jeff,
yes. We are using a canyonlands board with 460ex.
Ok.
2. You have some PCI device - what? Have you tested it works in a
standard PCI bus? Eg. ran lspci from an x86 host.
It is a FPGA board that we are
Hi Ira,
When Linux is assigning BARs and IRQs, it writes the BAR addresses to
the PCI cards, but does not write the IRQ. This was my experience with
PCI hotplug.
Ooh, subtle.
Bottom line is; if the IRQ field of lspci is 0, then you
need to figure out that problem first :)
In the PCI
On Thu, Dec 03, 2009 at 11:39:00AM -0800, Jeff Hane wrote:
On Thu, 2009-12-03 at 09:11 -0800, David Hawkins wrote:
Hi Jeff,
I'm trying to get interrupts working for my PCI device on a 460ex and
am having problem. My ISR never triggers.
I'm new to PCI(and ppc) and LDD said that
Dear David Hawkins,
In message 4b1816f9.1020...@ovro.caltech.edu you wrote:
Yep. It might require enabling a PCI subsystem in U-Boot.
I recall playing with a Yosemite board and a PCI card,
but I forget whether I had to do anything to enable
PCI configuration space setup. Post a question to
Hi Wolfgang,
In message 4b1816f9.1020...@ovro.caltech.edu you wrote:
Yep. It might require enabling a PCI subsystem in U-Boot.
I recall playing with a Yosemite board and a PCI card,
but I forget whether I had to do anything to enable
PCI configuration space setup. Post a question to the
U-Boot
On Thursday 03 December 2009 20:39:00 Jeff Hane wrote:
Can you clarify:
1. 460EX is your PCI host CPU?
yes. We are using a canyonlands board with 460ex.
PCI works on Canyonlands without any problems. I just tested latest Linux
release (2.6.32) with an PCI USB card:
-bash-3.2# uname -a
Hello,
I'm trying to get interrupts working for my PCI device on a 460ex and
am having problem. My ISR never triggers.
I'm new to PCI(and ppc) and LDD said that I could read the config reg
INTURRUPT_LINE to get the interrupt assigned to my PCI device. Well,
this always reads zero.
After
Hi Jeff,
On Thursday 03 December 2009 07:21:56 Jeff Hane wrote:
I'm trying to get interrupts working for my PCI device on a 460ex and
am having problem. My ISR never triggers.
Which 460EX board is this? Canyonlands or some custom board?
I'm new to PCI(and ppc) and LDD said that I could
11 matches
Mail list logo
