On Thu, Nov 13, 2014 at 01:42:12PM +1100, Michael Ellerman wrote:
On Mon, 2014-11-10 at 14:58 -0600, Paul Clarke wrote:
On 11/10/2014 04:08 AM, Benjamin Herrenschmidt wrote:
On Tue, 2014-10-07 at 14:13 -0500, Paul Clarke wrote:
This patch short-circuits the reset of the decrementer,
On Mon, 2014-11-17 at 11:18 -0800, Paul E. McKenney wrote:
On Thu, Nov 13, 2014 at 01:42:12PM +1100, Michael Ellerman wrote:
On Mon, 2014-11-10 at 14:58 -0600, Paul Clarke wrote:
On 11/10/2014 04:08 AM, Benjamin Herrenschmidt wrote:
On Tue, 2014-10-07 at 14:13 -0500, Paul Clarke wrote:
On Tue, Nov 18, 2014 at 12:46:56PM +1100, Michael Ellerman wrote:
On Mon, 2014-11-17 at 11:18 -0800, Paul E. McKenney wrote:
On Thu, Nov 13, 2014 at 01:42:12PM +1100, Michael Ellerman wrote:
On Mon, 2014-11-10 at 14:58 -0600, Paul Clarke wrote:
On 11/10/2014 04:08 AM, Benjamin
On Mon, 2014-11-10 at 14:58 -0600, Paul Clarke wrote:
On 11/10/2014 04:08 AM, Benjamin Herrenschmidt wrote:
On Tue, 2014-10-07 at 14:13 -0500, Paul Clarke wrote:
This patch short-circuits the reset of the decrementer, exiting after
the decrementer reset, but before the housekeeping tasks if
On Tue, 2014-10-07 at 14:13 -0500, Paul Clarke wrote:
The POWER ISA defines an always-running decrementer which can be used
to schedule interrupts after a certain time interval has elapsed.
The decrementer counts down at the same frequency as the Time Base,
which is 512 MHz. The maximum value
On 11/10/2014 04:08 AM, Benjamin Herrenschmidt wrote:
On Tue, 2014-10-07 at 14:13 -0500, Paul Clarke wrote:
The POWER ISA defines an always-running decrementer which can be used
to schedule interrupts after a certain time interval has elapsed.
The decrementer counts down at the same frequency
Paul,
what if your tb wraps during the test?
-Original Message-
From: Linuxppc-dev [mailto:linuxppc-dev-
bounces+heinz.wrobel=freescale@lists.ozlabs.org] On Behalf Of Paul
Clarke
Sent: Tuesday, October 07, 2014 21:13
To: linuxppc-dev@lists.ozlabs.org
Subject: [PATCH] powerpc:
On 10/08/2014 12:37 AM, Heinz Wrobel wrote:
what if your tb wraps during the test?
Per the Power ISA, Time Base is 64 bits, monotonically increasing, and
is writable only in hypervisor state. To my understanding, it is set to
zero at boot (although this is not prescribed).
Also, as noted