Hello Scott,
Thanks for the prompt reply.
What's your CPU utilization? The CPU may just not be able to keep up with
that much traffic, with the software you're running.
The software I am using to check bandwidth is 'iperf'. Without running iperf the
CPU utilization varies around 30-50% and
Subject: [gianfar]bandwidth management problem on mpc8313 based board
...
I have mpc8313 powerpc based board with silicon revision 2.1. the
processor has two ETH ports (eTsec1 and eTsec2) i.e. eth0 and eth1.
eth0 is 1Gbps port and eth1 is 100Mbps port. On board there is L2
switch from
On Wed, 8 Jun 2011 16:21:03 +0530
Vijay Nikam vijay.t.ni...@gmail.com wrote:
Hello Scott,
Thanks for the prompt reply.
What's your CPU utilization? The CPU may just not be able to keep up with
that much traffic, with the software you're running.
The software I am using to check
On Tue, 7 Jun 2011 18:32:37 +0530
Vijay Nikam vijay.t.ni...@gmail.com wrote:
Dear All,
I have mpc8313 powerpc based board with silicon revision 2.1. the
processor has two ETH ports (eTsec1 and eTsec2) i.e. eth0 and eth1.
eth0 is 1Gbps port and eth1 is 100Mbps port. On board there is L2
