Uwe Kleine-König reported:
while working on an defconfig (arm/mx27) I noticed that just updating
it[1] results in removing CONFIG_EEPROM_AT24=y. The reason is that
since commit
v2.6.36-5965-g5f2365d (misc devices: do not enable by default)
On Wed, Mar 23, 2011 at 02:19:20PM -0700, John Stultz wrote:
On Mon, 2011-02-28 at 08:57 +0100, Richard Cochran wrote:
+++ b/drivers/ptp/ptp_clock.c
@@ -0,0 +1,320 @@
[snip]
+static void enqueue_external_timestamp(struct timestamp_event_queue *queue,
+
On Sat, Mar 26, 2011 at 06:11:29PM +1100, Stephen Rothwell wrote:
Uwe Kleine-König reported:
while working on an defconfig (arm/mx27) I noticed that just updating
it[1] results in removing CONFIG_EEPROM_AT24=y. The reason is that
since commit
On Wed, Mar 23, 2011 at 02:30:04PM -0700, John Stultz wrote:
On Mon, 2011-02-28 at 08:57 +0100, Richard Cochran wrote:
+/*
+ * Register access functions
+ */
So what are the locking rules on the functions below? I assume the
etsects-lock needs to be held prior to calling, so that should
On Wed, Mar 23, 2011 at 02:46:25PM -0700, John Stultz wrote:
On Mon, 2011-02-28 at 08:58 +0100, Richard Cochran wrote:
+static int tdr_write(int bc, struct phy_device *dev,
+const struct timespec *ts, u16 cmd)
+{
+ ext_write(bc, dev, PAGE4, PTP_TDR, ts-tv_nsec
Hello,
On Sat, Mar 26, 2011 at 06:11:29PM +1100, Stephen Rothwell wrote:
Uwe Kleine-König reported:
while working on an defconfig (arm/mx27) I noticed that just updating
it[1] results in removing CONFIG_EEPROM_AT24=y. The reason is that
since commit
Hi All,
I am trying to boot Linux-2.6.38 on custom build MPC8250 board with all
SCC's and SMC's configured as UART's.
As device tree file for 8250 is not available I referred mpc8272ads file and
created the one attached.
I could able to use SMC1 or SCC1 as serial port in u-boot.
I could get