On Sat, 29 Jan 2022 08:16:04 +0100
Christophe JAILLET christophe.jail...@wanadoo.fr wrote:
>The error handling path of mpc52xx_lpbfifo_probe() and a request_irq() is
>not balanced by a corresponding free_irq().
>
>Add the missing call, as already done in the remove function.
>
>Fixes:
On Thu, 14 Oct 2021 07:33:26 -0500
Rob Herring robh...@kernel.org wrote:
...
>> +++ b/arch/powerpc/boot/dts/ac14xx.dts
>> @@ -301,13 +301,21 @@
>> fsl,tx-fifo-size = <512>;
>> };
>>
>> + /delete-node/ psc@11400;
>> + /delete-node/
'
mpc5121.dtsi:457.13-466.5: Warning (spi_bus_bridge): /soc@8000/psc@11900:
node name for SPI buses should be 'spi'
Signed-off-by: Anatolij Gustschin
---
Changes in v2:
- extract PSC nodes to files which can be included
separately and extended as needed
arch/powerpc/boot/dts/ac14xx.dts
hose hanging around, but they came with Open
>> Firmware rather than relying on the dts files that ship with the
>> kernel.
>>
>> Grant Likely was the original maintainer for MPC52xx until 2011,
>> Anatolij Gustschin is still listed as maintainer since then but hasn't
On Thu, 14 Oct 2021 10:44:46 +0200
Arnd Bergmann a...@arndb.de wrote:
>On Thu, Oct 14, 2021 at 12:12 AM Anatolij Gustschin wrote:
>> On Tue, 12 Oct 2021 16:39:56 +0200
>> Arnd Bergmann a...@arndb.de wrote:
>> ...
>> >Grant Likely was the original maintainer for MP
(spi_bus_bridge): /soc@8000/psc@11900:
node name for SPI buses should be 'spi'
Signed-off-by: Anatolij Gustschin
---
arch/powerpc/boot/dts/ac14xx.dts | 17 +++--
arch/powerpc/boot/dts/pdm360ng.dts | 11 ++-
2 files changed, 25 insertions(+), 3 deletions(-)
diff --git
C5200")
Cc: sta...@vger.kernel.org # v5.14+
Signed-off-by: Anatolij Gustschin
---
drivers/dma/bestcomm/ata.c | 2 +-
drivers/dma/bestcomm/bestcomm.c | 22 +++---
drivers/dma/bestcomm/fec.c | 4 ++--
drivers/dma/bestcomm/gen_bd.c | 4 ++--
4 files changed, 16
Fix build warning:
Warning (spi_bus_bridge): /soc5200@f000/psc@2000: node name for SPI buses
should be 'spi'
Signed-off-by: Anatolij Gustschin
---
arch/powerpc/boot/dts/motionpro.dts | 4
arch/powerpc/boot/dts/o2d.dtsi | 6 +-
2 files changed, 9 insertions(+), 1 deletion
On Wed, 13 Oct 2021 17:17:25 -0500
Rob Herring robh...@kernel.org wrote:
...
>In general, you shouldn't need to be changing the drivers. Can you
>tell me which warnings need driver changes?
ethernet and mdio drivers share registers, so they use same unit-address:
Hi Arnd, Rob,
On Tue, 12 Oct 2021 16:39:56 +0200
Arnd Bergmann a...@arndb.de wrote:
...
>Grant Likely was the original maintainer for MPC52xx until 2011,
>Anatolij Gustschin is still listed as maintainer since then but hasn't
>been active in it for a while either. Anatolij can probably b
Add ranges property to fix build warnings:
Warning (pci_bridge): /pci@fd00: missing ranges for PCI bridge (or not a
bridge)
Signed-off-by: Anatolij Gustschin
---
arch/powerpc/boot/dts/mpc5200b.dtsi | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/boot/dts
Signed-off-by: Anatolij Gustschin
---
arch/powerpc/boot/dts/a3m071.dts| 12 +-
arch/powerpc/boot/dts/a4m072.dts| 20 -
arch/powerpc/boot/dts/charon.dts| 14 ++--
arch/powerpc/boot/dts/cm5200.dts| 7 --
arch/powerpc/boot/dts/digsy_mt
Fixes build warnings:
Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but
no unit name
Signed-off-by: Anatolij Gustschin
---
arch/powerpc/boot/dts/charon.dts| 2 +-
arch/powerpc/boot/dts/digsy_mtc.dts | 2 +-
arch/powerpc/boot/dts/lite5200.dts | 2 +-
arch
This series fixes localbus, memory and pci node build warnings.
It was tested with current linux-next on digsy_mtc and tqm5200
boards.
Anatolij Gustschin (4):
powerpc/5200: dts: add missing pci ranges
powerpc/5200: dts: fix pci ranges warnings
powerpc/5200: dts: fix memory node unit name
Fix ranges property warnings:
pci@fd00:ranges: 'oneOf' conditional failed, one must be fixed:
Signed-off-by: Anatolij Gustschin
---
arch/powerpc/boot/dts/a4m072.dts| 6 +++---
arch/powerpc/boot/dts/charon.dts| 6 +++---
arch/powerpc/boot/dts/digsy_mtc.dts | 6 +++---
arch/powerpc
On Tue, 25 Feb 2020 10:31:44 +1100
Michael Ellerman m...@ellerman.id.au wrote:
>It's several years since the last commit from Anatolij, so mark
>MPC5XXX as "Odd Fixes" rather than "Maintained".
>
>Also the git link no longer works so remove it.
>
>Cc: Anato
On Fri, 15 Sep 2017 04:00:04 +0200
Alexandre Belloni alexandre.bell...@free-electrons.com wrote:
>The proper compatible for rv3029 is microcrystal,rv3029.
>
>Signed-off-by: Alexandre Belloni <alexandre.bell...@free-electrons.com>
Acked-by: Anatolij Gustschin <ag...@denx.de>
>
>Fix them to remove -I$(srctree)/arch/$(SRCARCH)/boot/dts path from
>dtc_cpp_flags.
>
>Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>
Tested-by: Anatolij Gustschin <ag...@denx.de>
On Tue, 13 Jun 2017 20:21:45 +1000
Michael Ellerman m...@ellerman.id.au wrote:
>Masahiro Yamada writes:
...
>> Ping.
>> I am not 100% sure who is responsible for this,
>> but somebody, could take a look at this patch, please?
>
>Have you tested it actually works?
On Mon, 27 Jun 2016 08:59:42 +0100
David Binderman linuxdev.baldr...@gmail.com wrote:
...
>linux-4.7-rc5/arch/powerpc/platforms/512x/clock-commonclk.c:824]:
>(warning) %d in format string (no. 1) requires 'int' but the argument
>type is 'size_t {aka unsigned long}'.
mpc512x is 32-bit arch, size_t
Highlights include a driver for MPC512x LocalPlus Bus FIFO with its
device tree binding documentation, mpc512x device tree updates and
some minor fixes.
These patches have already been queued for linux-next for a while.
The following changes since commit
On Tue, 27 May 2014 01:51:31 +0530
Himangi Saraogi wrote:
...
>
> Signed-off-by: Himangi Saraogi
> Acked-by: Julia Lawall
> ---
> Not compile tested
> arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 6 ++
> 1 file changed, 2
On Tue, 21 Jul 2015 09:21:13 +0200
Uwe Kleine-König wrote:
> These were introduced in commit 25ae3a0739c6 ("[POWERPC] mpc512x: Add
> MPC512x PSC support to MPC52xx psc driver") and never used. Moreover
> according to the datasheet[1] MEMERROR is bit 25 (0x40) and
On Mon, 12 Oct 2015 00:08:02 +0300
Alexander Popov wrote:
> Add a device tree binding for Freescale MPC512x LocalPlus Bus FIFO and
> introduce the document describing that binding.
>
> Signed-off-by: Alexander Popov
> ---
>
On Mon, 12 Oct 2015 00:08:01 +0300
Alexander Popov wrote:
> This driver for Freescale MPC512x LocalPlus Bus FIFO (called SCLPC
> in the Reference Manual) allows Direct Memory Access transfers
> between RAM and peripheral devices on LocalPlus Bus.
>
> Signed-off-by:
On Tue, 20 Oct 2015 16:04:12 +0100
Luis de Bethencourt wrote:
> From: Luis de Bethencourt
>
> This platform driver has a OF device ID table but the OF module
> alias information is not created so module autoloading won't work.
>
> Signed-off-by:
Hi Ben !
On Wed, 29 Jan 2014 18:46:09 +1100
Benjamin Herrenschmidt b...@kernel.crashing.org wrote:
...
Hrm, I get a merge conflicts with spi-mpc512x-psc.c, please check that I
fixed it up properly in powerpc-next and let me know.
your fix is correct.
Thanks,
Anatolij
Hi Ben !
On Wed, 15 Jan 2014 22:18:59 +0100
Anatolij Gustschin ag...@denx.de wrote:
Hi Ben !
please pull mpc5xxx patches for v3.14:
Ping.
Switch mpc512x to the common clock framework and adapt mpc512x
drivers to use the new clock driver. Old PPC_CLOCK code is
removed entirely since
Hi Ben !
On Fri, 17 Jan 2014 19:22:36 -0600
Scott Wood scottw...@freescale.com wrote:
This contains a fix for a chroma_defconfig build break that was
introduced by e6500 tablewalk support, and a device tree binding patch
that missed the previous pull request due to some last-minute polishing.
On Tue, 28 Jan 2014 17:00:14 +1100
Benjamin Herrenschmidt b...@kernel.crashing.org wrote:
On Tue, 2014-01-28 at 06:46 +0100, Anatolij Gustschin wrote:
Hi Ben !
On Wed, 15 Jan 2014 22:18:59 +0100
Anatolij Gustschin ag...@denx.de wrote:
Hi Ben !
please pull mpc5xxx patches
Hi Ben !
please pull mpc5xxx patches for v3.14:
Switch mpc512x to the common clock framework and adapt mpc512x
drivers to use the new clock driver. Old PPC_CLOCK code is
removed entirely since there are no users any more.
All these patches have been in linux-next for more then
two weeks now.
Hi Ben !
Please pull two DTS fixes for MPC5125 tower board. Without
them the v3.13-rcX kernels do not boot.
Thanks,
Anatolij
The following changes since commit 803c2d2f84da9dc2619449994af34d27148ab20d:
powerpc/powernv: Fix OPAL LPC access in Little Endian (2013-12-13 15:55:15
+1100)
are
On Fri, 20 Dec 2013 10:16:22 +0100
Matteo Facchinetti matteo.facchine...@sirius-es.it wrote:
At the moment the USB controller's pin muxing is not setup
correctly and causes a kernel panic upon system startup, so
disable the USB1 device tree node in the MPC5125 tower board
dts file.
The USB
On Tue, 10 Dec 2013 14:11:33 +0100
Gerhard Sittig g...@denx.de wrote:
...
Gerhard Sittig (4):
powerpc/512x: clk: minor comment updates
powerpc/512x: clk: enforce even SDHC divider values
powerpc/512x: clk: support MPC5121/5123/5125 SoC variants
powerpc/512x: dts: add MPC5125 clock
and resolution of 'interrupts' specs for peripherals gets misled
(tries to use the 'soc' as the interrupt parent which fails), emits
'no irq domain found' WARN() messages and breaks the boot process
[ best viewed with 'git diff -U5' to have DT node names in the context ]
Cc: Anatolij Gustschin ag
The bestcomm driver has been moved to drivers/dma, so to select
this driver by default additionally CONFIG_DMADEVICES has to be
enabled. Currently it is not enabled in the config despite existing
CONFIG_PPC_BESTCOMM=y in the config files. Fix it.
Signed-off-by: Anatolij Gustschin ag...@denx.de
Hi Ben !
Please pull a device tree fix for v3.13. The booting on mpc512x
is broken since v3.13-rc1, this patch repairs it.
Thanks,
Anatolij
The following changes since commit 721cb59e9d95eb7f47ec73711ed35ef85e1ea1ca:
powerpc/windfarm: Fix XServe G5 fan control Makefile issue (2013-11-27
On Sat, 30 Nov 2013 23:51:22 +0100
Gerhard Sittig g...@denx.de wrote:
introduce a dt-bindings/ header file for MPC512x clocks,
providing symbolic identifiers for those SoC clocks which
clients will reference from their device tree nodes
Cc: Rob Herring rob.herr...@calxeda.com
Cc: Pawel
On Sat, 30 Nov 2013 23:51:23 +0100
Gerhard Sittig g...@denx.de wrote:
this addresses the clock driver aka provider's side of clocks
- introduce a 'clocks' subtree with an 'osc' node for the crystal
or oscillator SoC input (fixed frequency)
- the 'clock@f00' clock-control-module node
lack an
oscillator node (backwards compat), the REF clock is then derived from
the IPS bus frequency and multiplier values fetched from hardware
Cc: Mike Turquette mturque...@linaro.org
Cc: Anatolij Gustschin ag...@denx.de
Cc: linux-arm-ker...@lists.infradead.org
Cc: linuxppc-dev
On Sat, 30 Nov 2013 23:51:25 +0100
Gerhard Sittig g...@denx.de wrote:
extend the recently added COMMON_CLK platform support for MPC512x such
that it works with incomplete device tree data which lacks clock specs
Cc: Mike Turquette mturque...@linaro.org
Cc: Anatolij Gustschin ag...@denx.de
On Sat, 30 Nov 2013 23:51:26 +0100
Gerhard Sittig g...@denx.de wrote:
this addresses the client side of device tree based clock lookups
add clock specifiers to the mbx, nfc, mscan, sdhc, i2c, axe, diu, viu,
mdio, fec, usb, pata, psc, psc fifo, and pci nodes in the shared
mpc5121.dtsi
such that multiplatform kernels (the combination of 512x
and 52xx within one executable) keep working
Cc: Mike Turquette mturque...@linaro.org
Cc: Anatolij Gustschin ag...@denx.de
Cc: linux-arm-ker...@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Gerhard Sittig g...@denx.de
On Sat, 30 Nov 2013 23:51:28 +0100
Gerhard Sittig g...@denx.de wrote:
after device tree based clock lookup became available, the peripheral
driver need no longer construct clock names which include the PSC index,
remove the psc%d_mclk template and unconditionally use 'mclk'
acquire and
On Sat, 30 Nov 2013 23:51:29 +0100
Gerhard Sittig g...@denx.de wrote:
after device tree based clock lookup became available, the peripheral
driver need no longer construct clock names which include the PSC index,
remove the psc%d_mclk template and unconditionally use 'mclk'
acquire and
On Sat, 30 Nov 2013 23:51:30 +0100
Gerhard Sittig g...@denx.de wrote:
prepare and enable the FIFO clock upon PSC FIFO initialization,
check for and propagage errors when enabling the PSC FIFO clock,
disable and unprepare the FIFO clock upon PSC FIFO uninitialization
devm_{get,put}_clk()
On Sat, 30 Nov 2013 23:51:31 +0100
Gerhard Sittig g...@denx.de wrote:
after device tree based clock lookup became available, the peripheral
driver need no longer construct clock names which include the component
index -- remove the usb%d_clk template, always use ipg instead
Cc: Greg
On Sat, 30 Nov 2013 23:51:32 +0100
Gerhard Sittig g...@denx.de wrote:
after device tree based clock lookup became available, the NAND
flash driver need no longer use the previous global nfc_clk name,
but should use the ipg clock name specific to the OF node
Cc: David Woodhouse
On Sat, 30 Nov 2013 23:51:33 +0100
Gerhard Sittig g...@denx.de wrote:
after device tree based clock lookup became available, the VIU driver
need no longer use the previous global viu_clk name, but should use
the ipg clock name specific to the OF node
Cc: Mauro Carvalho Chehab
On Sat, 30 Nov 2013 23:51:34 +0100
Gerhard Sittig g...@denx.de wrote:
implement a .get_clock() callback for the MPC512x platform which uses
the common clock infrastructure (eliminating direct access to the clock
control registers from within the CAN network driver), and provide the
On Sat, 30 Nov 2013 23:51:35 +0100
Gerhard Sittig g...@denx.de wrote:
transition to the common clock framework has completed and the PPC_CLOCK
is no longer available for the MPC512x platform, remove the now obsolete
code path of the mpc5xxx mscan driver which accessed clock control module
for successful operation in
the presence of an outdated device tree which lacks clock specs
Cc: Anatolij Gustschin ag...@denx.de
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Gerhard Sittig g...@denx.de
---
arch/powerpc/platforms/512x/mpc512x_shared.c | 169
++
1 file
initialized, thus the clock provider isn't available then
Cc: Mike Turquette mturque...@linaro.org
Cc: Anatolij Gustschin ag...@denx.de
Cc: linux-arm-ker...@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Gerhard Sittig g...@denx.de
---
arch/powerpc/platforms/512x/clock
@8000 !
mpc5121-rtc 8a00.rtc: mpc5121_rtc_probe: could not request irq: 0
mpc5121-rtc: probe of 8a00.rtc failed with error -22
...
[ best viewed with 'git diff -U5' to have DT node names in the context ]
Cc: Anatolij Gustschin ag...@denx.de
Cc: linuxppc-dev@lists.ozlabs.org
-data) mpc8xxx_gpio2mask(gpio);
+ val = in_be32(mm-regs + GPIO_DAT) ~out_mask;
+ out_shadow = mpc8xxx_gc-data out_mask;
+
+ return (val | out_shadow) mpc8xxx_gpio2mask(gpio);
}
static int mpc8xxx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
Acked-by: Anatolij Gustschin
On Fri, 15 Nov 2013 15:16:29 +0800
Liu Gang gang@freescale.com wrote:
For MPC8572/MPC8536, the status of GPIOs defined as output
cannot be determined by reading GPDAT register, so the code
use shadow data register instead. But if the input pins are
asserted high, they will always read
Hi Lorenzo,
On Tue, 19 Nov 2013 11:20:24 +0100
neorf3k neor...@gmail.com wrote:
Hello Anatolij, this is our code, used at University, but again it doesn’t
work…
How i told, the only information we have about that reg are:
Chip select 4 specification:
Lp_cs4
bus size: 8 bit
bus
Hi Lorenzo,
see my comments below.
On Fri, 15 Nov 2013 17:27:30 +0100
neorf3k neor...@gmail.com wrote:
Hello again, I’ve tried this code, but we are not able to
change cs4 reg value… what could be?
—
#define MALab_DEVICE_NAME MALab
#define MPC5xxx_MM_CS4_START (MBAR_BASE + 0x0024)
On Wed, 13 Nov 2013 14:48:24 +0100
neorf3k neor...@gmail.com wrote:
Yes, that is a device on the lpb via an fpga. We have tried to configure
the chip select 4 configuration register at address MBAR + 0x0310, and it
seems to be ok. what do you mean with “chip select parameters”?
I meant the
On Tue, 12 Nov 2013 20:23:20 +0100
neorf3k neor...@gmail.com wrote:
we have tried to read and program an 8bit register with 32bit address.
we have mapped it with: ioremap, kmalloc etc… and then using: outb,
iowrite8 etc.. but when we write to it, the value doesn’t change…
with other memory
changes up to 7e198197ec878c720af4dc35c49c0c6a99b83f9f:
powerpc/mpc512x: remove unnecessary #if (2013-10-30 22:56:10 +0100)
Anatolij Gustschin (1):
powerpc/52xx: fix build breakage for MPC5200 LPBFIFO module
Brian Norris (1
a13xp0p0...@gmail.com
---
drivers/dma/mpc512x_dma.c | 42 +-
1 file changed, 25 insertions(+), 17 deletions(-)
Acked-by: Anatolij Gustschin ag...@denx.de
diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c
index 2fe4353..f41639f 100644
On Fri, 11 Oct 2013 10:37:38 -0700
Brian Norris computersforpe...@gmail.com wrote:
Several functions are only ever referenced locally, so make them static.
Of those functions, many of them are protected by an #if. However, the
code which can compile fine in either case.
Now that (1) the
The MPC5200 LPBFIFO driver requires the bestcomm module to be
enabled, otherwise building will fail. Fix it.
Cc: sta...@vger.kernel.org # 3.10+
Reported-by: Wolfgang Denk w...@denx.de
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
arch/powerpc/platforms/52xx/Kconfig | 2 +-
1 file changed
Hi,
On Wed, 9 Oct 2013 12:29:31 -0700
Brian Norris computersforpe...@gmail.com wrote:
...
+#else
+void __init mpc512x_setup_diu(void) { /* EMPTY */ }
+void __init mpc512x_init_diu(void) { /* EMPTY */ }
#endif
void __init mpc512x_init_IRQ(void)
I see an alternative solution:
Hello,
On Thu, 10 Oct 2013 11:23:55 -0700
Brian Norris computersforpe...@gmail.com wrote:
...
making mpc512x_setup_diu(), mpc512x_release_bootmem(),
mpc512x_valid_monitor_port() and void mpc512x_set_pixel_clock()
should be okay.
And mpc512x_init_diu()?
yes, it can be static, too.
On Fri, 27 Sep 2013 17:28:38 +0200
Gerhard Sittig g...@denx.de wrote:
a disabled Kconfig option results in a reference to a not implemented
routine when the IS_ENABLED() macro is used for both conditional
implementation of the routine as well as a C language source code test
at the call site
the
printout) needs revert, too. We want to know WHICH critical irq failed,
not which level it had.
Signed-off-by: Wolfram Sang w...@the-dreams.de
Cc: Sebastian Andrzej Siewior bige...@linutronix.de
Cc: Anatolij Gustschin ag...@denx.de
applied, thanks
On Thu, 05 Sep 2013 16:50:48 +1000
Benjamin Herrenschmidt b...@kernel.crashing.org wrote:
...
Thanks. BTW. Next time, any chance you can base this off the same point
in Linus tree where my next branch is based ? Or base of my next
branch :-)
Okay, I will base of your next branch.
Thanks,
Hi Ben !
Please pull mpc5xxx patches for v3.12.
There are cleanups for some mpc5121 specific drivers and DTS files
in preparation to switch mpc5121 clock support to a clock driver
based on common clock framework. Additionally Sebastian fixed the
mpc52xx PIC driver so that it builds when using
On Tue, 6 Aug 2013 22:43:44 +0200
Gerhard Sittig g...@denx.de wrote:
use devm_clk_get() for automatic put after device close, check for and
propagate errors when enabling clocks, need to prepare clocks before
they can get enabled, adjust error code paths to correctly balance
get/put and
On Tue, 6 Aug 2013 22:43:45 +0200
Gerhard Sittig g...@denx.de wrote:
use devm_clk_get() for automatic put after device close, check for and
propagate errors when enabling clocks, need to prepare clocks before
they can get enabled, adjust code paths to correctly balance get/put and
On Tue, 6 Aug 2013 22:43:52 +0200
Gerhard Sittig g...@denx.de wrote:
reword the clock control module's registers declaration such that the
MCLK related registers form an array and get indexed by PSC controller
or CAN controller component number
this change is in preparation to COMMON_CLK
On Fri, 02 Aug 2013 15:30:00 -0700
Mike Turquette mturque...@linaro.org wrote:
Quoting Gerhard Sittig (2013-07-22 05:14:40)
the common clock drivers were motivated/initiated by ARM development
and apparently assume little endian peripherals
wrap register/peripherals access in the common
On Tue, 6 Aug 2013 22:43:54 +0200
Gerhard Sittig g...@denx.de wrote:
prepare C preprocessor support when processing MPC512x DTS files
- switch from DTS syntax to CPP syntax for include specs
- create a symlink such that DTS processing can reference includes
Signed-off-by: Gerhard Sittig
On Tue, 6 Aug 2013 22:43:41 +0200
Gerhard Sittig g...@denx.de wrote:
cleanup the MPC512x SoC's SPI master's use of the clock API
- get, prepare, and enable the MCLK during probe; disable, unprepare and
put the MCLK upon remove; hold a reference to the clock over the
period of use
-
On Tue, 6 Aug 2013 22:43:42 +0200
Gerhard Sittig g...@denx.de wrote:
cleanup the clock API use of the UART driver which is shared among the
MPC512x and the MPC5200 platforms
- get, prepare, and enable the MCLK during port allocation; disable,
unprepare and put the MCLK upon port release;
On Wed, 21 Aug 2013 20:48:17 +0100
Mark Brown broo...@kernel.org wrote:
On Wed, Aug 21, 2013 at 09:22:58PM +0200, Anatolij Gustschin wrote:
Mark, are you going to apply this patch? Or should I queue it
in my mpc5xxx tree (I'd like to get your Acked-by then)?
Has this series settled down
On Tue, 6 Aug 2013 22:43:43 +0200
Gerhard Sittig g...@denx.de wrote:
use devm_get_clk() for automatic put upon device close, check for and
propagate errors when enabling clocks, must prepare clocks before they
can get enabled, unprepare after disable
Signed-off-by: Gerhard Sittig
On Mon, 12 Aug 2013 16:17:53 +0200
Sebastian Andrzej Siewior bige...@linutronix.de wrote:
My gcc-4.3.5 fails to compile due to:
|cc1: warnings being treated as errors
|arch/powerpc/platforms/52xx/mpc52xx_pic.c: In function ‘mpc52xx_irqhost_map’:
On Tue, 6 Aug 2013 22:43:49 +0200
Gerhard Sittig g...@denx.de wrote:
...
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 46ac1dd..549ff08 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
...
+ clk = devm_clk_get(pdev-dev,
On Mon, 5 Aug 2013 16:14:29 -0700
Peter LaDow pet...@gocougs.wsu.edu wrote:
...
Perhaps it is a BIOS option ROM like you suggested earlier. The
3c90xC reference manual I found
(http://people.freebsd.org/~wpaul/3Com/3c90xc.pdf) mentions an option
ROM (and there is an Atmel part stuffed). I
On Mon, 5 Aug 2013 10:58:01 -0700
Peter LaDow pet...@gocougs.wsu.edu wrote:
I have a PCI card (a Netgear FA331, vendor:device 100b:0020) that is
failing to be detected by our PPC platform. This device works just
fine in a PC, and other cards work just fine in the same PCI slot (we
have an
On Tue, 02 Jul 2013 17:46:01 +1000
Benjamin Herrenschmidt b...@kernel.crashing.org wrote:
On Tue, 2013-07-02 at 00:36 +0200, Anatolij Gustschin wrote:
Hi Ben !
Please pull mpc5xxx patches for v3.11. There are small cleanups
and fixes for mpc512x common code, mpc512x_defconfig updates
On Tue, 02 Jul 2013 20:29:02 +1000
Benjamin Herrenschmidt b...@kernel.crashing.org wrote:
...
The server should be up, a recent test pull succeeded here. Could you
please try again?
Just a fluke indeed, works now. Pulled pushed.
Thanks!
Cheers,
Anatolij
On Sun, 30 Jun 2013 18:23:00 +0200
Gerhard Sittig g...@denx.de wrote:
...
In hindsight, I'd prefer to reword the subject to something more
specific, unless it's too late for this now. I suggest:
[PATCH] powerpc/mpc512x: commit re-generated defconfig
But if the patch is already queued
)
Anatolij Gustschin (1):
powerpc/mpc512x: enable USB support in defconfig
Gerhard Sittig (3):
powerpc/mpc512x: move common code to shared.c file
powerpc/mpc512x: initialize board restart earlier
powerpc/mpc512x: commit re-generated
From: Gerhard Sittig g...@denx.de
This patch does not change the content, it merely re-orders
configuration items and drops explicit options which already
apply as the default.
Signed-off-by: Gerhard Sittig g...@denx.de
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
arch/powerpc/configs
Enable USB EHCI, mass storage and USB gadget support.
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
arch/powerpc/configs/mpc512x_defconfig | 7 +++
1 file changed, 7 insertions(+)
diff --git a/arch/powerpc/configs/mpc512x_defconfig
b/arch/powerpc/configs/mpc512x_defconfig
index
On Wed, 17 Apr 2013 23:21:41 +0200
Anatolij Gustschin ag...@denx.de wrote:
From: Matteo Facchinetti matteo.facchine...@sirius-es.it
MPC5125 PSC controller has different register layout than MPC5121.
To support MPC5125 PSC in this driver we have to provide further
psc_ops functions for SoC
Signed-off-by: Matteo Facchinetti matteo.facchine...@sirius-es.it
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
Changes in v2:
- split into two patches to simplify review
- minor coding style changes
- revise commit log
drivers/tty/serial/mpc52xx_uart.c | 161
-by: Anatolij Gustschin ag...@denx.de
---
Changes in v2:
- split into two patches to simplify review
- minor coding style changes
- revise commit log
arch/powerpc/include/asm/mpc52xx_psc.h | 49 +++
drivers/tty/serial/mpc52xx_uart.c | 241
2 files
Hi Gerhard,
On Tue, 14 May 2013 16:40:52 +0200
Gerhard Sittig g...@denx.de wrote:
...
Gerhard Sittig (2):
powerpc/mpc512x: move common code to the shared.c file
powerpc/mpc512x: initialize board restart earlier
Applied both patches for -next. Thanks!
Anatolij
On Fri, 3 May 2013 10:28:02 +0400
Alexander Popov a13xp0p0...@gmail.com wrote:
Hello Vinod,
Thanks for the review.
I will return with improved and tested version 2.
Note that there is a patch for .device_prep_slave_sg() operation
for this driver as part of this series:
Hello Alexander,
On Fri, 3 May 2013 14:43:23 +0400
Alexander Popov a13xp0p0...@gmail.com wrote:
Hello Anatolij,
Note that there is a patch for .device_prep_slave_sg() operation
for this driver as part of this series:
https://patchwork.kernel.org/patch/2368581/
:48:44 +0200)
Anatolij Gustschin (2):
powerpc/mpc512x: create SoC devices for more nodes
powerpc/512x: add ifm ac14xx board
Matteo Facchinetti (2):
powerpc/512x: move mpc5121_generic platform to mpc512x_generic
On Wed, 24 Apr 2013 10:55:10 +0800
Tiejun Chen tiejun.c...@windriver.com wrote:
commit 761bbcb7, usb: ehci-fsl: set INCR8 mode for system bus interface
on MPC512x, introduced to fix one MPC5121e (M36P) Errata by setting
INCR8 mode for system bus interface on MPC512x, but we should make sure
-by: Anatolij Gustschin ag...@denx.de
---
Changes in v2:
- split into two patches to simplify review
- minor coding style changes
- revise commit log
arch/powerpc/include/asm/mpc52xx_psc.h | 49 +++
drivers/tty/serial/mpc52xx_uart.c | 241
2 files
Signed-off-by: Matteo Facchinetti matteo.facchine...@sirius-es.it
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
Greg, with your Acked-by I can push these patches to my mpc5xxx tree.
But it is fine with me if you prefer to apply them to tty tree.
Thanks,
Anatolij
Changes in v2:
- split
On Wed, 20 Mar 2013 18:41:53 +0100
Matteo Facchinetti matteo.facchine...@sirius-es.it wrote:
MPC5125 PSC controller has different registers than MPC5121.
This patch was originally created by Vladimir Ermakov
https://lists.ozlabs.org/pipermail/linuxppc-dev/2011-March/088954.html
1 - 100 of 353 matches
Mail list logo