Hi
I am using a MPC8315ERDB board. For this i've an external button which is
connected to GPIO pin 7 of the board. And if this button is pressed then
certain files have to be deleted. Browsing through the internet i found that
GPIO drivers have to be included into the kernel and hence i set a
Hi all,
My setup is as below I've two MPC8315E board from freescale connected as
below
PC1 mpc board1 --- mpc board 2 - PC2.
I've installed openswan 2.6.18 on the mpc boards for encrypting the data
sent over the link between mpc boards using IPSEC. I've l2tpv3 bridge
between the mpc
Hi
I am facing a problem with my powerpc gcc. Actually i am using a ltib to
configure the kernel and the file system for my mpc8315erdb board from linux
2.6 host machine. and the installation of kernel and filesystem is
successful. i don't have make installed in the board and i wanted to
compile
Hi
I am facing a problem with my powerpc gcc. Actually i am using a ltib to
configure the kernel and the file system for my mpc8315erdb board from linux
2.6 host machine. and the installation of kernel and filesystem is
successful. i don't have make installed in the board and i wanted to
compile
Thanks scott! my question must have been very silly to u! thanks for replying
to it patiently!!!
Vasanth Ragavendran wrote:
Thanks again Scott. That was really helpful. Actually i forgot to mention
that i had created an ext2 ramdisk file system and it was non-persistent
(the mount point
to be changed in order to make it persistent. thanks again for prompt
response..
Scott Wood-2 wrote:
On Mon, 7 Mar 2011 20:28:32 -0800
Vasanth Ragavendran ragavendra...@yahoo.co.in wrote:
Thanks a ton Scott. Actually i was working with the same version of the
kernel on both the boards
:32 -0800
Vasanth Ragavendran ragavendra...@yahoo.co.in wrote:
Thanks a ton Scott. Actually i was working with the same version of the
kernel on both the boards.
it was 2.6.29.6. neither i changed the u-boot. it was the same in both.
however i recompiled the kernel and i installed on both
i'm facing a problem. i've installed openvpn on mpc8315erdb board and when i
give the command
openvpn --mktun --dev tap0 i get the error
[root@mpc8315erdb /]# openvpn --mktun --dev tap0
Sat Jan 1 01:04:21 2000 OpenVPNUnable to handle kernel paging request for
data
at address 0x
files into that partition?
or how should i make it persistent so that files stay beyond reboot! thanks
again! eagerly awaiting your response.
Scott Wood-2 wrote:
On Mon, 7 Mar 2011 03:09:27 -0800
Vasanth Ragavendran ragavendra...@yahoo.co.in wrote:
i'm facing a problem. i've installed openvpn