Re: [kvm-unit-tests PATCH 5/7] arch-run: Add a "continuous" migration option for tests
On Mon Mar 4, 2024 at 7:19 PM AEST, Andrew Jones wrote:
> On Mon, Mar 04, 2024 at 07:17:35AM +0100, Thomas Huth wrote:
> > On 26/02/2024 10.38, Nicholas Piggin wrote:
> > > The cooperative migration protocol is very good to control precise
> > > pre and post conditions for a migration event. However in some cases
> > > its intrusiveness to the test program, can mask problems and make
> > > analysis more difficult.
> > >
> > > For example to stress test migration vs concurrent complicated
> > > memory access, including TLB refill, ram dirtying, etc., then the
> > > tight spin at getchar() and resumption of the workload after
> > > migration is unhelpful.
> > >
> > > This adds a continuous migration mode that directs the harness to
> > > perform migrations continually. This is added to the migration
> > > selftests, which also sees cooperative migration iterations reduced
> > > to avoid increasing test time too much.
> > >
> > > Signed-off-by: Nicholas Piggin
> > > ---
> > > common/selftest-migration.c | 16 +--
> > > lib/migrate.c | 18
> > > lib/migrate.h | 3 ++
> > > scripts/arch-run.bash | 55 -
> > > 4 files changed, 82 insertions(+), 10 deletions(-)
> > >
> > > diff --git a/common/selftest-migration.c b/common/selftest-migration.c
> > > index 0afd8581c..9a9b61835 100644
> > > --- a/common/selftest-migration.c
> > > +++ b/common/selftest-migration.c
> > > @@ -9,12 +9,13 @@
> > >*/
> > > #include
> > > #include
> > > +#include
> > > -#define NR_MIGRATIONS 30
> > > +#define NR_MIGRATIONS 15
> > > int main(int argc, char **argv)
> > > {
> > > - report_prefix_push("migration");
> > > + report_prefix_push("migration harness");
> > > if (argc > 1 && !strcmp(argv[1], "skip")) {
> > > migrate_skip();
> > > @@ -24,7 +25,16 @@ int main(int argc, char **argv)
> > > for (i = 0; i < NR_MIGRATIONS; i++)
> > > migrate_quiet();
> > > - report(true, "simple harness stress");
> > > + report(true, "cooperative migration");
> > > +
> > > + migrate_begin_continuous();
> > > + mdelay(2000);
> > > + migrate_end_continuous();
> > > + mdelay(1000);
> > > + migrate_begin_continuous();
> > > + mdelay(2000);
> > > + migrate_end_continuous();
> > > + report(true, "continuous migration");
> > > }
> > > report_prefix_pop();
> > > diff --git a/lib/migrate.c b/lib/migrate.c
> > > index 1d22196b7..770f76d5c 100644
> > > --- a/lib/migrate.c
> > > +++ b/lib/migrate.c
> > > @@ -60,3 +60,21 @@ void migrate_skip(void)
> > > puts("Skipped VM migration (quiet)\n");
> > > (void)getchar();
> > > }
> > > +
> > > +void migrate_begin_continuous(void)
> > > +{
> > > + puts("Begin continuous migration\n");
> > > + (void)getchar();
> > > +}
> > > +
> > > +void migrate_end_continuous(void)
> > > +{
> > > + /*
> > > + * Migration can split this output between source and dest QEMU
> > > + * output files, print twice and match once to always cope with
> > > + * a split.
> > > + */
> > > + puts("End continuous migration\n");
> > > + puts("End continuous migration (quiet)\n");
> > > + (void)getchar();
> > > +}
> > > diff --git a/lib/migrate.h b/lib/migrate.h
> > > index db6e0c501..35b6703a2 100644
> > > --- a/lib/migrate.h
> > > +++ b/lib/migrate.h
> > > @@ -11,3 +11,6 @@ void migrate_quiet(void);
> > > void migrate_once(void);
> > > void migrate_skip(void);
> > > +
> > > +void migrate_begin_continuous(void);
> > > +void migrate_end_continuous(void);
> > > diff --git a/scripts/arch-run.bash b/scripts/arch-run.bash
> > > index d0f6f098f..5c7e72036 100644
> > > --- a/scripts/arch-run.bash
> > > +++ b/scripts/arch-run.bash
> > > @@ -125,15 +125,17 @@ qmp_events ()
> > > filter_quiet_msgs ()
> > > {
> > > grep -v "Now migrate the VM (quiet)" |
> > > + grep -v "Begin continuous migration (quiet)" |
> > > + grep -v "End continuous migration (quiet)" |
> > > grep -v "Skipped VM migration (quiet)"
> > > }
> > > seen_migrate_msg ()
> > > {
> > > if [ $skip_migration -eq 1 ]; then
> > > - grep -q -e "Now migrate the VM" < $1
> > > + grep -q -e "Now migrate the VM" -e "Begin continuous migration"
> > > < $1
> > > else
> > > - grep -q -e "Now migrate the VM" -e "Skipped VM migration" < $1
> > > + grep -q -e "Now migrate the VM" -e "Begin continuous migration"
> > > -e "Skipped VM migration" < $1
> > > fi
> > > }
> > > @@ -161,6 +163,7 @@ run_migration ()
> > > src_qmpout=/dev/null
> > > dst_qmpout=/dev/null
> > > skip_migration=0
> > > + continuous_migration=0
> > > mkfifo ${src_outfifo}
> > > mkfifo ${dst_outfifo}
> > > @@ -186,9 +189,12 @@ run_migration ()
> > > do_migration || return $?
> > >
Re: [kvm-unit-tests PATCH 5/7] arch-run: Add a "continuous" migration option for tests
On Mon Mar 4, 2024 at 4:17 PM AEST, Thomas Huth wrote:
> On 26/02/2024 10.38, Nicholas Piggin wrote:
> > The cooperative migration protocol is very good to control precise
> > pre and post conditions for a migration event. However in some cases
> > its intrusiveness to the test program, can mask problems and make
> > analysis more difficult.
> >
> > For example to stress test migration vs concurrent complicated
> > memory access, including TLB refill, ram dirtying, etc., then the
> > tight spin at getchar() and resumption of the workload after
> > migration is unhelpful.
> >
> > This adds a continuous migration mode that directs the harness to
> > perform migrations continually. This is added to the migration
> > selftests, which also sees cooperative migration iterations reduced
> > to avoid increasing test time too much.
> >
> > Signed-off-by: Nicholas Piggin
> > ---
> > common/selftest-migration.c | 16 +--
> > lib/migrate.c | 18
> > lib/migrate.h | 3 ++
> > scripts/arch-run.bash | 55 -
> > 4 files changed, 82 insertions(+), 10 deletions(-)
> >
> > diff --git a/common/selftest-migration.c b/common/selftest-migration.c
> > index 0afd8581c..9a9b61835 100644
> > --- a/common/selftest-migration.c
> > +++ b/common/selftest-migration.c
> > @@ -9,12 +9,13 @@
> >*/
> > #include
> > #include
> > +#include
> >
> > -#define NR_MIGRATIONS 30
> > +#define NR_MIGRATIONS 15
> >
> > int main(int argc, char **argv)
> > {
> > - report_prefix_push("migration");
> > + report_prefix_push("migration harness");
> >
> > if (argc > 1 && !strcmp(argv[1], "skip")) {
> > migrate_skip();
> > @@ -24,7 +25,16 @@ int main(int argc, char **argv)
> >
> > for (i = 0; i < NR_MIGRATIONS; i++)
> > migrate_quiet();
> > - report(true, "simple harness stress");
> > + report(true, "cooperative migration");
> > +
> > + migrate_begin_continuous();
> > + mdelay(2000);
> > + migrate_end_continuous();
> > + mdelay(1000);
> > + migrate_begin_continuous();
> > + mdelay(2000);
> > + migrate_end_continuous();
> > + report(true, "continuous migration");
> > }
> >
> > report_prefix_pop();
> > diff --git a/lib/migrate.c b/lib/migrate.c
> > index 1d22196b7..770f76d5c 100644
> > --- a/lib/migrate.c
> > +++ b/lib/migrate.c
> > @@ -60,3 +60,21 @@ void migrate_skip(void)
> > puts("Skipped VM migration (quiet)\n");
> > (void)getchar();
> > }
> > +
> > +void migrate_begin_continuous(void)
> > +{
> > + puts("Begin continuous migration\n");
> > + (void)getchar();
> > +}
> > +
> > +void migrate_end_continuous(void)
> > +{
> > + /*
> > +* Migration can split this output between source and dest QEMU
> > +* output files, print twice and match once to always cope with
> > +* a split.
> > +*/
> > + puts("End continuous migration\n");
> > + puts("End continuous migration (quiet)\n");
> > + (void)getchar();
> > +}
> > diff --git a/lib/migrate.h b/lib/migrate.h
> > index db6e0c501..35b6703a2 100644
> > --- a/lib/migrate.h
> > +++ b/lib/migrate.h
> > @@ -11,3 +11,6 @@ void migrate_quiet(void);
> > void migrate_once(void);
> >
> > void migrate_skip(void);
> > +
> > +void migrate_begin_continuous(void);
> > +void migrate_end_continuous(void);
> > diff --git a/scripts/arch-run.bash b/scripts/arch-run.bash
> > index d0f6f098f..5c7e72036 100644
> > --- a/scripts/arch-run.bash
> > +++ b/scripts/arch-run.bash
> > @@ -125,15 +125,17 @@ qmp_events ()
> > filter_quiet_msgs ()
> > {
> > grep -v "Now migrate the VM (quiet)" |
> > + grep -v "Begin continuous migration (quiet)" |
> > + grep -v "End continuous migration (quiet)" |
> > grep -v "Skipped VM migration (quiet)"
> > }
> >
> > seen_migrate_msg ()
> > {
> > if [ $skip_migration -eq 1 ]; then
> > - grep -q -e "Now migrate the VM" < $1
> > + grep -q -e "Now migrate the VM" -e "Begin continuous migration"
> > < $1
> > else
> > - grep -q -e "Now migrate the VM" -e "Skipped VM migration" < $1
> > + grep -q -e "Now migrate the VM" -e "Begin continuous migration"
> > -e "Skipped VM migration" < $1
> > fi
> > }
> >
> > @@ -161,6 +163,7 @@ run_migration ()
> > src_qmpout=/dev/null
> > dst_qmpout=/dev/null
> > skip_migration=0
> > + continuous_migration=0
> >
> > mkfifo ${src_outfifo}
> > mkfifo ${dst_outfifo}
> > @@ -186,9 +189,12 @@ run_migration ()
> > do_migration || return $?
> >
> > while ps -p ${live_pid} > /dev/null ; do
> > - # Wait for test exit or further migration messages.
> > - if ! seen_migrate_msg ${src_out} ; then
> > + if [[ ${continuous_migration} -eq 1 ]] ; then
>
> Here you're using "[[" for testing ...
>
> > +
Re: [kvm-unit-tests PATCH 5/7] arch-run: Add a "continuous" migration option for tests
On Mon, Mar 04, 2024 at 07:17:35AM +0100, Thomas Huth wrote:
> On 26/02/2024 10.38, Nicholas Piggin wrote:
> > The cooperative migration protocol is very good to control precise
> > pre and post conditions for a migration event. However in some cases
> > its intrusiveness to the test program, can mask problems and make
> > analysis more difficult.
> >
> > For example to stress test migration vs concurrent complicated
> > memory access, including TLB refill, ram dirtying, etc., then the
> > tight spin at getchar() and resumption of the workload after
> > migration is unhelpful.
> >
> > This adds a continuous migration mode that directs the harness to
> > perform migrations continually. This is added to the migration
> > selftests, which also sees cooperative migration iterations reduced
> > to avoid increasing test time too much.
> >
> > Signed-off-by: Nicholas Piggin
> > ---
> > common/selftest-migration.c | 16 +--
> > lib/migrate.c | 18
> > lib/migrate.h | 3 ++
> > scripts/arch-run.bash | 55 -
> > 4 files changed, 82 insertions(+), 10 deletions(-)
> >
> > diff --git a/common/selftest-migration.c b/common/selftest-migration.c
> > index 0afd8581c..9a9b61835 100644
> > --- a/common/selftest-migration.c
> > +++ b/common/selftest-migration.c
> > @@ -9,12 +9,13 @@
> >*/
> > #include
> > #include
> > +#include
> > -#define NR_MIGRATIONS 30
> > +#define NR_MIGRATIONS 15
> > int main(int argc, char **argv)
> > {
> > - report_prefix_push("migration");
> > + report_prefix_push("migration harness");
> > if (argc > 1 && !strcmp(argv[1], "skip")) {
> > migrate_skip();
> > @@ -24,7 +25,16 @@ int main(int argc, char **argv)
> > for (i = 0; i < NR_MIGRATIONS; i++)
> > migrate_quiet();
> > - report(true, "simple harness stress");
> > + report(true, "cooperative migration");
> > +
> > + migrate_begin_continuous();
> > + mdelay(2000);
> > + migrate_end_continuous();
> > + mdelay(1000);
> > + migrate_begin_continuous();
> > + mdelay(2000);
> > + migrate_end_continuous();
> > + report(true, "continuous migration");
> > }
> > report_prefix_pop();
> > diff --git a/lib/migrate.c b/lib/migrate.c
> > index 1d22196b7..770f76d5c 100644
> > --- a/lib/migrate.c
> > +++ b/lib/migrate.c
> > @@ -60,3 +60,21 @@ void migrate_skip(void)
> > puts("Skipped VM migration (quiet)\n");
> > (void)getchar();
> > }
> > +
> > +void migrate_begin_continuous(void)
> > +{
> > + puts("Begin continuous migration\n");
> > + (void)getchar();
> > +}
> > +
> > +void migrate_end_continuous(void)
> > +{
> > + /*
> > +* Migration can split this output between source and dest QEMU
> > +* output files, print twice and match once to always cope with
> > +* a split.
> > +*/
> > + puts("End continuous migration\n");
> > + puts("End continuous migration (quiet)\n");
> > + (void)getchar();
> > +}
> > diff --git a/lib/migrate.h b/lib/migrate.h
> > index db6e0c501..35b6703a2 100644
> > --- a/lib/migrate.h
> > +++ b/lib/migrate.h
> > @@ -11,3 +11,6 @@ void migrate_quiet(void);
> > void migrate_once(void);
> > void migrate_skip(void);
> > +
> > +void migrate_begin_continuous(void);
> > +void migrate_end_continuous(void);
> > diff --git a/scripts/arch-run.bash b/scripts/arch-run.bash
> > index d0f6f098f..5c7e72036 100644
> > --- a/scripts/arch-run.bash
> > +++ b/scripts/arch-run.bash
> > @@ -125,15 +125,17 @@ qmp_events ()
> > filter_quiet_msgs ()
> > {
> > grep -v "Now migrate the VM (quiet)" |
> > + grep -v "Begin continuous migration (quiet)" |
> > + grep -v "End continuous migration (quiet)" |
> > grep -v "Skipped VM migration (quiet)"
> > }
> > seen_migrate_msg ()
> > {
> > if [ $skip_migration -eq 1 ]; then
> > - grep -q -e "Now migrate the VM" < $1
> > + grep -q -e "Now migrate the VM" -e "Begin continuous migration"
> > < $1
> > else
> > - grep -q -e "Now migrate the VM" -e "Skipped VM migration" < $1
> > + grep -q -e "Now migrate the VM" -e "Begin continuous migration"
> > -e "Skipped VM migration" < $1
> > fi
> > }
> > @@ -161,6 +163,7 @@ run_migration ()
> > src_qmpout=/dev/null
> > dst_qmpout=/dev/null
> > skip_migration=0
> > + continuous_migration=0
> > mkfifo ${src_outfifo}
> > mkfifo ${dst_outfifo}
> > @@ -186,9 +189,12 @@ run_migration ()
> > do_migration || return $?
> > while ps -p ${live_pid} > /dev/null ; do
> > - # Wait for test exit or further migration messages.
> > - if ! seen_migrate_msg ${src_out} ; then
> > + if [[ ${continuous_migration} -eq 1 ]] ; then
>
> Here you're using "[[" for testing ...
>
> > + do_migration || return $?
> > + elif ! seen_migrate_msg
Re: [kvm-unit-tests PATCH 5/7] arch-run: Add a "continuous" migration option for tests
On 26/02/2024 10.38, Nicholas Piggin wrote:
The cooperative migration protocol is very good to control precise
pre and post conditions for a migration event. However in some cases
its intrusiveness to the test program, can mask problems and make
analysis more difficult.
For example to stress test migration vs concurrent complicated
memory access, including TLB refill, ram dirtying, etc., then the
tight spin at getchar() and resumption of the workload after
migration is unhelpful.
This adds a continuous migration mode that directs the harness to
perform migrations continually. This is added to the migration
selftests, which also sees cooperative migration iterations reduced
to avoid increasing test time too much.
Signed-off-by: Nicholas Piggin
---
common/selftest-migration.c | 16 +--
lib/migrate.c | 18
lib/migrate.h | 3 ++
scripts/arch-run.bash | 55 -
4 files changed, 82 insertions(+), 10 deletions(-)
diff --git a/common/selftest-migration.c b/common/selftest-migration.c
index 0afd8581c..9a9b61835 100644
--- a/common/selftest-migration.c
+++ b/common/selftest-migration.c
@@ -9,12 +9,13 @@
*/
#include
#include
+#include
-#define NR_MIGRATIONS 30
+#define NR_MIGRATIONS 15
int main(int argc, char **argv)
{
- report_prefix_push("migration");
+ report_prefix_push("migration harness");
if (argc > 1 && !strcmp(argv[1], "skip")) {
migrate_skip();
@@ -24,7 +25,16 @@ int main(int argc, char **argv)
for (i = 0; i < NR_MIGRATIONS; i++)
migrate_quiet();
- report(true, "simple harness stress");
+ report(true, "cooperative migration");
+
+ migrate_begin_continuous();
+ mdelay(2000);
+ migrate_end_continuous();
+ mdelay(1000);
+ migrate_begin_continuous();
+ mdelay(2000);
+ migrate_end_continuous();
+ report(true, "continuous migration");
}
report_prefix_pop();
diff --git a/lib/migrate.c b/lib/migrate.c
index 1d22196b7..770f76d5c 100644
--- a/lib/migrate.c
+++ b/lib/migrate.c
@@ -60,3 +60,21 @@ void migrate_skip(void)
puts("Skipped VM migration (quiet)\n");
(void)getchar();
}
+
+void migrate_begin_continuous(void)
+{
+ puts("Begin continuous migration\n");
+ (void)getchar();
+}
+
+void migrate_end_continuous(void)
+{
+ /*
+* Migration can split this output between source and dest QEMU
+* output files, print twice and match once to always cope with
+* a split.
+*/
+ puts("End continuous migration\n");
+ puts("End continuous migration (quiet)\n");
+ (void)getchar();
+}
diff --git a/lib/migrate.h b/lib/migrate.h
index db6e0c501..35b6703a2 100644
--- a/lib/migrate.h
+++ b/lib/migrate.h
@@ -11,3 +11,6 @@ void migrate_quiet(void);
void migrate_once(void);
void migrate_skip(void);
+
+void migrate_begin_continuous(void);
+void migrate_end_continuous(void);
diff --git a/scripts/arch-run.bash b/scripts/arch-run.bash
index d0f6f098f..5c7e72036 100644
--- a/scripts/arch-run.bash
+++ b/scripts/arch-run.bash
@@ -125,15 +125,17 @@ qmp_events ()
filter_quiet_msgs ()
{
grep -v "Now migrate the VM (quiet)" |
+ grep -v "Begin continuous migration (quiet)" |
+ grep -v "End continuous migration (quiet)" |
grep -v "Skipped VM migration (quiet)"
}
seen_migrate_msg ()
{
if [ $skip_migration -eq 1 ]; then
- grep -q -e "Now migrate the VM" < $1
+ grep -q -e "Now migrate the VM" -e "Begin continuous migration"
< $1
else
- grep -q -e "Now migrate the VM" -e "Skipped VM migration" < $1
+ grep -q -e "Now migrate the VM" -e "Begin continuous migration" -e
"Skipped VM migration" < $1
fi
}
@@ -161,6 +163,7 @@ run_migration ()
src_qmpout=/dev/null
dst_qmpout=/dev/null
skip_migration=0
+ continuous_migration=0
mkfifo ${src_outfifo}
mkfifo ${dst_outfifo}
@@ -186,9 +189,12 @@ run_migration ()
do_migration || return $?
while ps -p ${live_pid} > /dev/null ; do
- # Wait for test exit or further migration messages.
- if ! seen_migrate_msg ${src_out} ; then
+ if [[ ${continuous_migration} -eq 1 ]] ; then
Here you're using "[[" for testing ...
+ do_migration || return $?
+ elif ! seen_migrate_msg ${src_out} ; then
sleep 0.1
+ elif grep -q "Begin continuous migration" < ${src_out} ; then
+ do_migration || return $?
elif grep -q "Now migrate the VM" < ${src_out} ; then
do_migration || return $?
elif [ $skip_migration -eq 0 ] && grep -q "Skipped
[kvm-unit-tests PATCH 5/7] arch-run: Add a "continuous" migration option for tests
The cooperative migration protocol is very good to control precise
pre and post conditions for a migration event. However in some cases
its intrusiveness to the test program, can mask problems and make
analysis more difficult.
For example to stress test migration vs concurrent complicated
memory access, including TLB refill, ram dirtying, etc., then the
tight spin at getchar() and resumption of the workload after
migration is unhelpful.
This adds a continuous migration mode that directs the harness to
perform migrations continually. This is added to the migration
selftests, which also sees cooperative migration iterations reduced
to avoid increasing test time too much.
Signed-off-by: Nicholas Piggin
---
common/selftest-migration.c | 16 +--
lib/migrate.c | 18
lib/migrate.h | 3 ++
scripts/arch-run.bash | 55 -
4 files changed, 82 insertions(+), 10 deletions(-)
diff --git a/common/selftest-migration.c b/common/selftest-migration.c
index 0afd8581c..9a9b61835 100644
--- a/common/selftest-migration.c
+++ b/common/selftest-migration.c
@@ -9,12 +9,13 @@
*/
#include
#include
+#include
-#define NR_MIGRATIONS 30
+#define NR_MIGRATIONS 15
int main(int argc, char **argv)
{
- report_prefix_push("migration");
+ report_prefix_push("migration harness");
if (argc > 1 && !strcmp(argv[1], "skip")) {
migrate_skip();
@@ -24,7 +25,16 @@ int main(int argc, char **argv)
for (i = 0; i < NR_MIGRATIONS; i++)
migrate_quiet();
- report(true, "simple harness stress");
+ report(true, "cooperative migration");
+
+ migrate_begin_continuous();
+ mdelay(2000);
+ migrate_end_continuous();
+ mdelay(1000);
+ migrate_begin_continuous();
+ mdelay(2000);
+ migrate_end_continuous();
+ report(true, "continuous migration");
}
report_prefix_pop();
diff --git a/lib/migrate.c b/lib/migrate.c
index 1d22196b7..770f76d5c 100644
--- a/lib/migrate.c
+++ b/lib/migrate.c
@@ -60,3 +60,21 @@ void migrate_skip(void)
puts("Skipped VM migration (quiet)\n");
(void)getchar();
}
+
+void migrate_begin_continuous(void)
+{
+ puts("Begin continuous migration\n");
+ (void)getchar();
+}
+
+void migrate_end_continuous(void)
+{
+ /*
+* Migration can split this output between source and dest QEMU
+* output files, print twice and match once to always cope with
+* a split.
+*/
+ puts("End continuous migration\n");
+ puts("End continuous migration (quiet)\n");
+ (void)getchar();
+}
diff --git a/lib/migrate.h b/lib/migrate.h
index db6e0c501..35b6703a2 100644
--- a/lib/migrate.h
+++ b/lib/migrate.h
@@ -11,3 +11,6 @@ void migrate_quiet(void);
void migrate_once(void);
void migrate_skip(void);
+
+void migrate_begin_continuous(void);
+void migrate_end_continuous(void);
diff --git a/scripts/arch-run.bash b/scripts/arch-run.bash
index d0f6f098f..5c7e72036 100644
--- a/scripts/arch-run.bash
+++ b/scripts/arch-run.bash
@@ -125,15 +125,17 @@ qmp_events ()
filter_quiet_msgs ()
{
grep -v "Now migrate the VM (quiet)" |
+ grep -v "Begin continuous migration (quiet)" |
+ grep -v "End continuous migration (quiet)" |
grep -v "Skipped VM migration (quiet)"
}
seen_migrate_msg ()
{
if [ $skip_migration -eq 1 ]; then
- grep -q -e "Now migrate the VM" < $1
+ grep -q -e "Now migrate the VM" -e "Begin continuous migration"
< $1
else
- grep -q -e "Now migrate the VM" -e "Skipped VM migration" < $1
+ grep -q -e "Now migrate the VM" -e "Begin continuous migration"
-e "Skipped VM migration" < $1
fi
}
@@ -161,6 +163,7 @@ run_migration ()
src_qmpout=/dev/null
dst_qmpout=/dev/null
skip_migration=0
+ continuous_migration=0
mkfifo ${src_outfifo}
mkfifo ${dst_outfifo}
@@ -186,9 +189,12 @@ run_migration ()
do_migration || return $?
while ps -p ${live_pid} > /dev/null ; do
- # Wait for test exit or further migration messages.
- if ! seen_migrate_msg ${src_out} ; then
+ if [[ ${continuous_migration} -eq 1 ]] ; then
+ do_migration || return $?
+ elif ! seen_migrate_msg ${src_out} ; then
sleep 0.1
+ elif grep -q "Begin continuous migration" < ${src_out} ; then
+ do_migration || return $?
elif grep -q "Now migrate the VM" < ${src_out} ; then
do_migration || return $?
elif [ $skip_migration -eq 0 ] && grep -q "Skipped VM
migration" < ${src_out} ; then
@@ -218,7 +224,7 @@ do_migration ()
# The test must
