Hi Vaibhav,
2 comments below (one of which I missed on the previous iteration, sorry).
Le 26/01/2019 à 12:46, Vaibhav Jain a écrit :
Within cxl module, iteration over array 'adapter->slices' may be racy
at few points as it might be simultaneously read during an EEH and its
contents being set
Hi Rob,
On Sun, Jan 27, 2019 at 4:00 AM Rob Herring wrote:
> On Wed, Jan 23, 2019 at 9:33 AM Geert Uytterhoeven
> wrote:
> > On Tue, Dec 11, 2018 at 9:24 PM Rob Herring wrote:
> > > This adds the build infrastructure for checking DT binding schema
> > > documents and validating dts files
Le 25/01/2019 à 06:11, Vaibhav Jain a écrit :
This patch forces shutdown of CAPP when CXL module is unloaded. This
is accomplished via a call to pnv_phb_to_cxl_mode() with mode ==
OPAL_PHB_CAPI_MODE_PCIE.
Signed-off-by: Vaibhav Jain
---
drivers/misc/cxl/cxl.h | 1 +
On Mon, Jan 28, 2019 at 11:11:10AM +, Christophe Leroy wrote:
> This serie refactors exception entry macros for 40x, 6xx and 8xx
>
> This serie will benefit to the implementation of CONFIG_VMAP, and also
> to Ben's serie on MSR_EE.
We don't have a CONFIG_VMAP. Do you mean CONFIG_VMAP_STACK
Hi Rob,
On Mon, Jan 28, 2019 at 4:35 PM Rob Herring wrote:
> On Mon, Jan 28, 2019 at 3:43 AM Geert Uytterhoeven
> wrote:
> > On Tue, Dec 11, 2018 at 9:24 PM Rob Herring wrote:
> > > This adds the build infrastructure for checking DT binding schema
> > > documents and validating dts files
From: Christophe Leroy
[ Upstream commit ffca395b11c4a5a6df6d6345f794b0e3d578e2d0 ]
On the 8xx, no-execute is set via PPP bits in the PTE. Therefore
a no-exec fault generates DSISR_PROTFAULT error bits,
not DSISR_NOEXEC_OR_G.
This patch adds DSISR_PROTFAULT in the test mask.
Fixes:
From: Finn Thain
[ Upstream commit 296dcc40f2f2e402facf7cd26cf3f2c8f4b17d47 ]
When the block device is opened with FMODE_EXCL, ref_count is set to -1.
This value doesn't get reset when the device is closed which means the
device cannot be opened again. Fix this by checking for refcount <= 0
in
Le 25/01/2019 à 06:11, Vaibhav Jain a écrit :
Recent updates to OPAL [1] have provided support for new CXL modes on
PHB that need to force a cold reset on the bridge (CRESET). However
PHB CRESET is a multi step process and cannot be completed
synchronously as expected by current kernel
From: Mathieu Malaterre
[ Upstream commit beba24ac59133cb36ecd03f9af9ccb11971ee20e ]
When both `CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y` and `CONFIG_UBSAN=y`
are set, link step typically produce numberous warnings about orphan
section:
+ powerpc-linux-gnu-ld -EB -m elf32ppc -Bstatic
From: Mahesh Salgaonkar
[ Upstream commit 0db6896ff6332ba694f1e61b93ae3b2640317633 ]
For fadump to work successfully there should not be any holes in reserved
memory ranges where kernel has asked firmware to move the content of old
kernel memory in event of crash. Now that fadump uses CMA for
From: Finn Thain
[ Upstream commit 427c5ce4417cba0801fbf79c8525d1330704759c ]
As of v4.20, the swim3 driver crashes when loaded on a PowerBook G3
(Wallstreet).
MacIO PCI driver attached to Gatwick chipset
MacIO PCI driver attached to Heathrow chipset
swim3 0.00015000:floppy: [fd0] SWIM3 floppy
On 10/29/18 1:43 PM, Nathan Fontenot wrote:
> On pseries systems, performing a partition migration can result in
> altering the nodes a CPU is assigned to on the destination system. For
> exampl, pre-migration on the source system CPUs are in node 1 and 3,
> post-migration on the destination
From: Christophe Leroy
[ Upstream commit 05a4ab823983d9136a460b7b5e0d49ee709a6f86 ]
With the following piece of code, the following compilation warning
is encountered:
if (_IOC_DIR(ioc) != _IOC_NONE) {
int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE :
From: Frank Rowand
[ Upstream commit 5b3f5c408d8cc59b87e47f1ab9803dbd006e4a91 ]
The previous commit, "of: overlay: add missing of_node_get() in
__of_attach_node_sysfs" added a missing of_node_get() to
__of_attach_node_sysfs(). This results in a refcount imbalance
for nodes attached with
From: Frank Rowand
[ Upstream commit 5b3f5c408d8cc59b87e47f1ab9803dbd006e4a91 ]
The previous commit, "of: overlay: add missing of_node_get() in
__of_attach_node_sysfs" added a missing of_node_get() to
__of_attach_node_sysfs(). This results in a refcount imbalance
for nodes attached with
From: Suraj Jitindar Singh
[ Upstream commit 693ac10a88a2219bde553b2e8460dbec97e594e6 ]
The kvm capability KVM_CAP_SPAPR_TCE_VFIO is used to indicate the
availability of in kernel tce acceleration for vfio. However it is
currently the case that this is only available on a powernv machine,
not
From: Madhavan Srinivasan
[ Upstream commit 17cfccc91545682513541924245abb876d296063 ]
MMCRA[34:36] and MMCRA[38:44] expose the thresholding counter value.
Thresholding counter can be used to count latency cycles such as
load miss to reload. But threshold counter value is not relevant
when the
Hi Vaibhav,
I think there's value in there, as I'm hearing Mellanox would prefer to
start from a "clean" state, as in pci mode, when they load their driver
after a card FW update.
However, I'm pretty reluctant to make it the default behaviour. It's not
like we haven't had our share of
On Mon, Jan 28, 2019 at 3:43 AM Geert Uytterhoeven wrote:
>
> Hi Rob,
>
> On Tue, Dec 11, 2018 at 9:24 PM Rob Herring wrote:
> > This adds the build infrastructure for checking DT binding schema
> > documents and validating dts files using the binding schema.
> >
> > Check DT binding schema
Hi,
This is what we observed: there was a storm on the medium so that our
controller could not do its TX, resulting in timeout. When timeout occurs, the
driver clears all descriptors from the TX queue. The function called in this
patch is used to reflect this clearing also in the BQL layer.
Le 28/01/2019 à 15:15, Christoph Hellwig a écrit :
On Mon, Jan 28, 2019 at 11:11:10AM +, Christophe Leroy wrote:
This serie refactors exception entry macros for 40x, 6xx and 8xx
This serie will benefit to the implementation of CONFIG_VMAP, and also
to Ben's serie on MSR_EE.
We don't
On 8/21/18 10:33 AM, m...@linux.vnet.ibm.com wrote:
> The migration of LPARs across Power systems affects many attributes
> including that of the associativity of CPUs. The patches in this
> set execute when a system is coming up fresh upon a migration target.
> They are intended to,
>
> *
On Mon, Jan 28, 2019 at 2:59 AM Geert Uytterhoeven wrote:
>
> Hi Rob,
>
> On Sun, Jan 27, 2019 at 4:00 AM Rob Herring wrote:
> > On Wed, Jan 23, 2019 at 9:33 AM Geert Uytterhoeven
> > wrote:
> > > On Tue, Dec 11, 2018 at 9:24 PM Rob Herring wrote:
> > > > This adds the build infrastructure
From: Alexey Kardashevskiy
[ Upstream commit bdbf649efe21173cae63b4b71db84176420f9039 ]
The powernv platform maintains 2 TCE tables for VFIO - a hardware TCE
table and a table with userspace addresses; the latter is used for
marking pages dirty when corresponging TCEs are unmapped from
the
From: Suraj Jitindar Singh
[ Upstream commit 693ac10a88a2219bde553b2e8460dbec97e594e6 ]
The kvm capability KVM_CAP_SPAPR_TCE_VFIO is used to indicate the
availability of in kernel tce acceleration for vfio. However it is
currently the case that this is only available on a powernv machine,
not
From: Madhavan Srinivasan
[ Upstream commit 17cfccc91545682513541924245abb876d296063 ]
MMCRA[34:36] and MMCRA[38:44] expose the thresholding counter value.
Thresholding counter can be used to count latency cycles such as
load miss to reload. But threshold counter value is not relevant
when the
From: Christophe Leroy
[ Upstream commit 05a4ab823983d9136a460b7b5e0d49ee709a6f86 ]
With the following piece of code, the following compilation warning
is encountered:
if (_IOC_DIR(ioc) != _IOC_NONE) {
int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE :
From: Frank Rowand
[ Upstream commit 5b3f5c408d8cc59b87e47f1ab9803dbd006e4a91 ]
The previous commit, "of: overlay: add missing of_node_get() in
__of_attach_node_sysfs" added a missing of_node_get() to
__of_attach_node_sysfs(). This results in a refcount imbalance
for nodes attached with
In htab_convert_pte_flags(), _PAGE_CACHE_CTL is used to check for the
_PAGE_SAO flag:
else if ((pteflags & _PAGE_CACHE_CTL) == _PAGE_SAO)
rflags |= (HPTE_R_W | HPTE_R_I | HPTE_R_M);
But, it isn't defined to include that flag:
#define _PAGE_CACHE_CTL (_PAGE_NON_IDEMPOTENT |
On 1/25/19 10:09 AM, Michael Bringmann wrote:
> Adding Nathan Lynch
>
> On 1/24/19 6:04 PM, Tyrel Datwyler wrote:
>> On 12/14/2018 12:50 PM, Michael Bringmann wrote:
>>> Define interface to acquire arch-specific drc info to match against
>>> hotpluggable devices. The current implementation
On Mon, Jan 28, 2019 at 07:20:43PM +0100, Christophe Leroy wrote:
> I'm wondering what CONFIG_RTAS is. It makes use of one of the SPRN_SPRG,
> ie SPRN_SPRG2.
>
> What are the CPUs concerned by RTAS ? Is there any of the old CPUs which
> have only 4 SPRGs (eg the 601), or could we use one in
From: Mathieu Malaterre
[ Upstream commit beba24ac59133cb36ecd03f9af9ccb11971ee20e ]
When both `CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y` and `CONFIG_UBSAN=y`
are set, link step typically produce numberous warnings about orphan
section:
+ powerpc-linux-gnu-ld -EB -m elf32ppc -Bstatic
From: Christophe Leroy
[ Upstream commit ffca395b11c4a5a6df6d6345f794b0e3d578e2d0 ]
On the 8xx, no-execute is set via PPP bits in the PTE. Therefore
a no-exec fault generates DSISR_PROTFAULT error bits,
not DSISR_NOEXEC_OR_G.
This patch adds DSISR_PROTFAULT in the test mask.
Fixes:
From: Finn Thain
[ Upstream commit 296dcc40f2f2e402facf7cd26cf3f2c8f4b17d47 ]
When the block device is opened with FMODE_EXCL, ref_count is set to -1.
This value doesn't get reset when the device is closed which means the
device cannot be opened again. Fix this by checking for refcount <= 0
in
From: Suraj Jitindar Singh
[ Upstream commit 693ac10a88a2219bde553b2e8460dbec97e594e6 ]
The kvm capability KVM_CAP_SPAPR_TCE_VFIO is used to indicate the
availability of in kernel tce acceleration for vfio. However it is
currently the case that this is only available on a powernv machine,
not
From: Christophe Leroy
[ Upstream commit 05a4ab823983d9136a460b7b5e0d49ee709a6f86 ]
With the following piece of code, the following compilation warning
is encountered:
if (_IOC_DIR(ioc) != _IOC_NONE) {
int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE :
From: Christophe Leroy
[ Upstream commit ffca395b11c4a5a6df6d6345f794b0e3d578e2d0 ]
On the 8xx, no-execute is set via PPP bits in the PTE. Therefore
a no-exec fault generates DSISR_PROTFAULT error bits,
not DSISR_NOEXEC_OR_G.
This patch adds DSISR_PROTFAULT in the test mask.
Fixes:
From: Frank Rowand
[ Upstream commit 5b3f5c408d8cc59b87e47f1ab9803dbd006e4a91 ]
The previous commit, "of: overlay: add missing of_node_get() in
__of_attach_node_sysfs" added a missing of_node_get() to
__of_attach_node_sysfs(). This results in a refcount imbalance
for nodes attached with
From: Frank Rowand
[ Upstream commit 5b3f5c408d8cc59b87e47f1ab9803dbd006e4a91 ]
The previous commit, "of: overlay: add missing of_node_get() in
__of_attach_node_sysfs" added a missing of_node_get() to
__of_attach_node_sysfs(). This results in a refcount imbalance
for nodes attached with
On 1/22/19 6:05 AM, Paul Mackerras wrote:
> On Mon, Jan 07, 2019 at 07:43:17PM +0100, Cédric Le Goater wrote:
>> This is the basic framework for the new KVM device supporting the XIVE
>> native exploitation mode. The user interface exposes a new capability
>> and a new KVM device to be used by
From: Madhavan Srinivasan
[ Upstream commit 17cfccc91545682513541924245abb876d296063 ]
MMCRA[34:36] and MMCRA[38:44] expose the thresholding counter value.
Thresholding counter can be used to count latency cycles such as
load miss to reload. But threshold counter value is not relevant
when the
From: Finn Thain
[ Upstream commit 296dcc40f2f2e402facf7cd26cf3f2c8f4b17d47 ]
When the block device is opened with FMODE_EXCL, ref_count is set to -1.
This value doesn't get reset when the device is closed which means the
device cannot be opened again. Fix this by checking for refcount <= 0
in
From: Christophe Leroy
[ Upstream commit 05a4ab823983d9136a460b7b5e0d49ee709a6f86 ]
With the following piece of code, the following compilation warning
is encountered:
if (_IOC_DIR(ioc) != _IOC_NONE) {
int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE :
From: Alexey Kardashevskiy
[ Upstream commit bdbf649efe21173cae63b4b71db84176420f9039 ]
The powernv platform maintains 2 TCE tables for VFIO - a hardware TCE
table and a table with userspace addresses; the latter is used for
marking pages dirty when corresponging TCEs are unmapped from
the
From: Mahesh Salgaonkar
[ Upstream commit 0db6896ff6332ba694f1e61b93ae3b2640317633 ]
For fadump to work successfully there should not be any holes in reserved
memory ranges where kernel has asked firmware to move the content of old
kernel memory in event of crash. Now that fadump uses CMA for
From: Mahesh Salgaonkar
[ Upstream commit 0db6896ff6332ba694f1e61b93ae3b2640317633 ]
For fadump to work successfully there should not be any holes in reserved
memory ranges where kernel has asked firmware to move the content of old
kernel memory in event of crash. Now that fadump uses CMA for
From: Finn Thain
[ Upstream commit 296dcc40f2f2e402facf7cd26cf3f2c8f4b17d47 ]
When the block device is opened with FMODE_EXCL, ref_count is set to -1.
This value doesn't get reset when the device is closed which means the
device cannot be opened again. Fix this by checking for refcount <= 0
in
On 25/01/2019 06:11, Vaibhav Jain wrote:
Recent updates to OPAL [1] have provided support for new CXL modes on
PHB that need to force a cold reset on the bridge (CRESET). However
PHB CRESET is a multi step process and cannot be completed
synchronously as expected by current kernel implementation
From: Frank Rowand
[ Upstream commit 5b3f5c408d8cc59b87e47f1ab9803dbd006e4a91 ]
The previous commit, "of: overlay: add missing of_node_get() in
__of_attach_node_sysfs" added a missing of_node_get() to
__of_attach_node_sysfs(). This results in a refcount imbalance
for nodes attached with
From: Christophe Leroy
[ Upstream commit 05a4ab823983d9136a460b7b5e0d49ee709a6f86 ]
With the following piece of code, the following compilation warning
is encountered:
if (_IOC_DIR(ioc) != _IOC_NONE) {
int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE :
On Mon, Jan 28, 2019 at 08:04:22AM +0100, Christoph Hellwig wrote:
> On Sun, Jan 27, 2019 at 02:13:09PM +0100, Christian Zigotzky wrote:
> > Christoph,
> >
> > What shall I do next?
>
> I'll need to figure out what went wrong with the new zone selection
> on powerpc and give you another branch to
From: Finn Thain
[ Upstream commit 296dcc40f2f2e402facf7cd26cf3f2c8f4b17d47 ]
When the block device is opened with FMODE_EXCL, ref_count is set to -1.
This value doesn't get reset when the device is closed which means the
device cannot be opened again. Fix this by checking for refcount <= 0
in
From: Christophe Leroy
[ Upstream commit 05a4ab823983d9136a460b7b5e0d49ee709a6f86 ]
With the following piece of code, the following compilation warning
is encountered:
if (_IOC_DIR(ioc) != _IOC_NONE) {
int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE :
From: Finn Thain
[ Upstream commit 296dcc40f2f2e402facf7cd26cf3f2c8f4b17d47 ]
When the block device is opened with FMODE_EXCL, ref_count is set to -1.
This value doesn't get reset when the device is closed which means the
device cannot be opened again. Fix this by checking for refcount <= 0
in
Thanks a lot! I will test it tomorrow.
— Christian
Sent from my iPhone
> On 28. Jan 2019, at 17:22, Christoph Hellwig wrote:
>
>> On Mon, Jan 28, 2019 at 08:04:22AM +0100, Christoph Hellwig wrote:
>>> On Sun, Jan 27, 2019 at 02:13:09PM +0100, Christian Zigotzky wrote:
>>> Christoph,
>>>
>>>
Hello All,
I'm wondering what CONFIG_RTAS is. It makes use of one of the SPRN_SPRG,
ie SPRN_SPRG2.
What are the CPUs concerned by RTAS ? Is there any of the old CPUs which
have only 4 SPRGs (eg the 601), or could we use one in SPRG4-7 for it
and reuse SPRG2 for something else ?
The idea
On 1/28/19 7:13 AM, Paul Mackerras wrote:
> On Wed, Jan 23, 2019 at 12:07:19PM +0100, Cédric Le Goater wrote:
>> On 1/23/19 11:30 AM, Paul Mackerras wrote:
>>> On Wed, Jan 23, 2019 at 05:45:24PM +1100, Benjamin Herrenschmidt wrote:
On Tue, 2019-01-22 at 16:26 +1100, Paul Mackerras wrote:
Le 27/01/2019 à 05:31, Andrew Donnellan a écrit :
[+ linuxppc-dev, because cxl/ocxl are handled through powerpc - please
cc on future versions of this series]
On 26/1/19 8:13 am, Olof Johansson wrote:
We're starting to see more of these kind of devices, the current
upcoming wave will
This Kconfig option was removed during v4.19 development in
commit 771c035372a0 ("deprecate the '__deprecated' attribute warnings entirely
and for good")
so there's no point to keep it in defconfigs any longer.
FWIW defconfigs were patched with:
get_dma_ops() falls into arch-dependant get_arch_dma_ops(), which
historically returns NULL on PowerPC. Therefore dma_set_mask() fails.
This affects Switchtec (and probably other) NTB devices, that they fail
to initialize.
The proposed patch should fix the issue.
---
Remove linux/rtc.h which is included more than once
Signed-off-by: Brajeswar Ghosh
---
arch/powerpc/kernel/time.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 3646affae963..bc0503ef9c9c 100644
--- a/arch/powerpc/kernel/time.c
On Mon, Jan 28, 2019 at 8:37 AM Mathias Thore
wrote:
>
> Hi,
>
>
> This is what we observed: there was a storm on the medium so that our
> controller could not do its TX, resulting in timeout. When timeout occurs,
> the driver clears all descriptors from the TX queue. The function called in
>
On Mon, Jan 28, 2019 at 9:41 PM Brajeswar Ghosh
wrote:
>
> Remove linux/rtc.h which is included more than once
>
> Signed-off-by: Brajeswar Ghosh
Acked-by: Souptick Joarder
> ---
> arch/powerpc/kernel/time.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/arch/powerpc/kernel/time.c
On 29/01/2019 04:31, Reza Arbab wrote:
> In htab_convert_pte_flags(), _PAGE_CACHE_CTL is used to check for the
> _PAGE_SAO flag:
>
> else if ((pteflags & _PAGE_CACHE_CTL) == _PAGE_SAO)
> rflags |= (HPTE_R_W | HPTE_R_I | HPTE_R_M);
>
> But, it isn't defined to include that flag:
>
Fixes coccinelle warning:
/arch/powerpc/kvm/book3s_hv.c:5345:3-15: WARNING: kzalloc_node should be used
for sibling_subcore_state, instead of kmalloc_node/memset
Signed-off-by: Christopher Diaz Riveros
---
arch/powerpc/kvm/book3s_hv.c | 5 +
1 file changed, 1 insertion(+), 4 deletions(-)
On Mon, Jan 28, 2019 at 07:26:00PM +0100, Cédric Le Goater wrote:
> On 1/28/19 7:13 AM, Paul Mackerras wrote:
> > Would we end up with too many VMAs if we just used mmap() to
> > change the mappings from the software-generated pages to the
> > hardware-generated interrupt pages?
> The sPAPR IRQ
On Mon, Jan 28, 2019 at 07:26:00PM +0100, Cédric Le Goater wrote:
>
> Is clearing the PTEs and repopulating the VMA unsafe ?
Actually, now that I come to think of it, there could be any number of
VMAs (well, up to almost 64k of them), since once you have a file
descriptor you can call mmap on
Thanks for reviewing this patch Fred. I have addressed all your review
comments in v3 of this patch.
--
Vaibhav Jain
Linux Technology Center, IBM India Pvt. Ltd.
Thanks for reviewing this patch Christophe,
christophe lombard writes:
>>
>> pe = pnv_ioda_get_pe(dev);
>> if (!pe)
>> -return -ENODEV;
>> +return -ENOENT;
>
> The return code of pnv_phb_to_cxl_mode() is also returned by an api in
> the cxllib librarie. So,
Frederic Barrat writes:
>> +opal_poll_events(NULL);
>
> Why is a call to opal_poll_events() needed?
Trying to make sure that opal pollers are run on the current CPU and any
opal timer are executed.
--
Vaibhav Jain
Linux Technology Center, IBM India Pvt. Ltd.
Within cxl module, iteration over array 'adapter->slices' may be racy
at few points as it might be simultaneously read during an EEH and its
contents being set to NULL while driver is being unloaded or unbound
from the adapter. This might result in a NULL pointer to 'struct afu'
being
On 29/1/19 5:15 pm, Vaibhav Jain wrote:
Within cxl module, iteration over array 'adapter->slices' may be racy
adapter->slices isn't an array, adapter->afu is the array.
at few points as it might be simultaneously read during an EEH and its
contents being set to NULL while driver is being
Unlike said in the comment, r1 is not reused by the critical
exception handler, as it uses a dedicated critirq_ctx stack.
Decrementing r1 early is then unneeded.
Should the above be valid, the code is crap buggy anyway as
r1 gets some intermediate values that would jeopardise the
whole process
This patch splits NORMAL_EXCEPTION_PROLOG in the same way as in
head_8xx.S and head_32.S and renames it EXCEPTION_PROLOG() as well
to match head_32.h
Signed-off-by: Christophe Leroy
---
arch/powerpc/kernel/head_40x.S | 26 --
1 file changed, 16 insertions(+), 10
This patch adds STACK_FRAME_REGS_MARKER in the stack at exception entry
in order to see interrupts in call traces as below:
[0.013964] Call Trace:
[0.014014] [c0745db0] [c007a9d4] tick_periodic.constprop.5+0xd8/0x104
(unreliable)
[0.014086] [c0745dc0] [c007aa20]
This patch adds EXC_XFER_TEMPLATE_CRITICAL() for handling
transfer to critical exception handler. This will allow
to move the normal exception to using the standard
EXC_XFER_TEMPLATE() defined in head_32.h
Signed-off-by: Christophe Leroy
---
arch/powerpc/kernel/head_40x.S | 21
Refactor exception entry macros by using the ones defined in head_32.h
Signed-off-by: Christophe Leroy
---
arch/powerpc/kernel/head_40x.S | 94 --
1 file changed, 8 insertions(+), 86 deletions(-)
diff --git a/arch/powerpc/kernel/head_40x.S
match_string() returns the index of an array for a matching string,
which can be used intead of open coded implementation.
Signed-off-by: Andy Shevchenko
---
drivers/pci/pcie/aer.c | 9 +++--
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/pci/pcie/aer.c
On Mon, Jan 14, 2019 at 09:44:02AM +0530, Ravi Bangoria wrote:
SNIP
> diff --git a/tools/perf/arch/x86/util/mem-events.c
> b/tools/perf/arch/x86/util/mem-events.c
> new file mode 100644
> index 000..5b4dcfe
> --- /dev/null
> +++ b/tools/perf/arch/x86/util/mem-events.c
> @@ -0,0 +1,25 @@
>
This serie refactors exception entry macros for 40x, 6xx and 8xx
This serie will benefit to the implementation of CONFIG_VMAP, and also
to Ben's serie on MSR_EE.
First patch of this serie is a part of the CONFIG_THREAD_INFO_IN_TASK serie.
This avoids a conflict between the two series.
This patch renames THREAD_INFO to TASK_STACK, because it is in fact
the offset of the pointer to the stack in task_struct so this pointer
will not be impacted by the move of THREAD_INFO.
Signed-off-by: Christophe Leroy
Reviewed-by: Nicholas Piggin
---
arch/powerpc/kernel/asm-offsets.c| 2
EXCEPTION_PROLOG is similar in head_8xx.S and head_32.S
This patch creates head_32.h and moves EXCEPTION_PROLOG macro
into it.
It also moves EXCEPTION() and EXC_XFER_() macros which are also
similar. For that, the 8xx needs to define a dummy DO_KVM asm macro.
Signed-off-by: Christophe Leroy
Setting MSR_RI applies to head_32 and head_8xx, but not to
head_40x. So in order to refactor EXCEPTION_PROLOG for 40x too,
this patch adds a macro for setting MSR_RI.
In the meantime, this gives the opportunity to make it
simpler on the 8xx as writing in SPRN_EID sets MSR_RI.
Signed-off-by:
Add CLR_MSR_WE() macro to allow 40x to clear
that bit from the register containing msr value.
This is the only difference between common EXCEPTION_PROLOG
and 40x one. This patch will allow 40x to use the common one.
Signed-off-by: Christophe Leroy
---
arch/powerpc/kernel/head_32.h | 5 +
1
Add START_EXCEPTION() in head_32.h for preparing the use
of head_32.h in head_40x.S
Signed-off-by: Christophe Leroy
---
arch/powerpc/kernel/head_32.h | 7 +--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kernel/head_32.h b/arch/powerpc/kernel/head_32.h
index
As preparation for using head_32.h for head_40x.S, move
LOAD_MSR_KERNEL() there and use it to load r10 with MSR_KERNEL value.
Signed-off-by: Christophe Leroy
---
arch/powerpc/kernel/entry_32.S | 9 +
arch/powerpc/kernel/head_32.h | 11 ++-
2 files changed, 11 insertions(+), 9
After a timeout event caused by for example a broadcast storm, when
the MAC and PHY are reset, the BQL TX queue needs to be reset as
well. Otherwise, the device will exhibit severe performance issues
even after the storm has ended.
Co-authored-by: David Gounaris
Signed-off-by: Mathias Thore
---
Hi Rob,
On Tue, Dec 11, 2018 at 9:24 PM Rob Herring wrote:
> This adds the build infrastructure for checking DT binding schema
> documents and validating dts files using the binding schema.
>
> Check DT binding schema documents:
> make dt_binding_check
>
> Build dts files and check using DT
On 1/14/19 9:44 AM, Ravi Bangoria wrote:
> Powerpc hw does not have inbuilt latency filter (--ldlat) for mem-load
> event and, perf_mem_events by default includes ldlat=30 which is
> causing failure on powerpc. Refactor code to support perf mem/c2c on
> powerpc.
>
> This patch depends on
Hi,
Le 28/01/2019 à 10:07, Mathias Thore a écrit :
After a timeout event caused by for example a broadcast storm, when
the MAC and PHY are reset, the BQL TX queue needs to be reset as
well. Otherwise, the device will exhibit severe performance issues
even after the storm has ended.
What are
90 matches
Mail list logo
