Hi,
I'm getting reproductible kernel panic when I use smaller SLOB
allocator (instead of SLAB). This is reproductible but very randomly
-- sometimes it happens during bootup, sometimes few minutes later.
Hardware is custom board with IBM405EP (very close to Bubingna, just
no RTC):
# cat /proc/c
On 7/25/06, Clint Thomas wrote:
>
>
> Hey guys,
>
> I have gone through the Linuxppc embedded and dev lists for information
> related to what I am trying to do, but was unable to find exactly what i'm
> looking for.
>
> Basically, the system I want linux running on does not require the
> initializ
--- Milton Miller wrote:
> On Tue Jul 25 2006 05:30:39 PM CDT, Clint Thomas
> wrote:
>
> > Basically, the system I want linux running on does
> not require the
> > initialization of hardware that U-boot provides,
> or at least it does not
> > need it to boot the linux kernel. I want to load
I'm portting Linux to MPC8247 using ELDK-3.0 Kit and U-boot-1.1.4.
The boot and kernel work well. But the console can't print anything.
In /etc/inittab, I append line: s0:2345:respawn:/sbin/mingetty ttyS0 9600
linux.
... ...
Kernel command line: console=ttyS0,9600n8 root=/dev/nfs rw
nfsroot=192.1
Hello guys
I have a board of 8247 ,I have get it run with kernel patched
with cpm2usb
It seems the irq of usb in 8247 dont work
the proc looks like the follow
bash-3.00# cat /proc/interrupts
On Mon, 2006-07-31 at 22:40 +0930, Phil Nitschke wrote:
> (I go no replies last week, so I'll try again, with less explanation...)
>
> If I master a DMA from a PCI device into a main memory buffer allocated
> with dma_alloc_noncoherent(), I need to synchronise the destination
> buffer using dma_sy
On Tue, Aug 01, 2006 at 10:40:11PM +0200, Karol Lewandowski wrote:
> Hi,
>
> I'm getting reproductible kernel panic when I use smaller SLOB
> allocator (instead of SLAB). This is reproductible but very randomly
> -- sometimes it happens during bootup, sometimes few minutes later.
>
> Hardware is
Try this if it helps!
http://www.linux.get2knowmore.com/
-Ameet
Benjamin Heyne wrote:
> Dear all,
> I am currently trying to get the 2.6.17.1 Linux kernel
> running on the Xilinx Virtex. I have the 2.4 kernel up
> and running - No problems there...
>
> But when using the 2.6 kernel (have copied
Hi
I?m writing a Driver for SPI. That is not working now.
I have a MPC8260 using Linux 2.6.14 (rheap patch).
My Problems and Questions
1. The Pointer in my BD to my "Buffer Pointer" is in external memory, I normaly
allocated with kmalloc. Are this ok or need I a SDMA Page ?
2. My SPCOM[STR] f
I'm not very familiar with SPI. See if someone on the list can help.
Best Regards,
Leo
> -Original Message-
> From: Keinen Namen [mailto:GSM909 at gmx.de]
> Sent: Monday, July 31, 2006 9:39 PM
> To: Li Yang-r58472
> Subject: Re: RE: RE: cpm_dpalloc
>
> Thx, now it?s working fine.
>
> Bu
t was scrubbed...
URL:
http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20060801/6b4332ce/attachment.htm
Dear all,
I am currently trying to get the 2.6.17.1 Linux kernel
running on the Xilinx Virtex. I have the 2.4 kernel up
and running - No problems there...
But when using the 2.6 kernel (have copied xparameters file,
patched for using TEMAC driver) with the same hardware configuration
the following
I am portting Linux(ver. 2.4.24) to MPC8247. I use U-boot and ELDK Kit.
The boot and kernel works well, but when the init process to execute
/sbin/init the board restarts. The message is shown following:
... ...
Memory BAT mapping: BAT2=32Mb, BAT3=0Mb, residual: 0Mb
Linux version 2.4.24-pre2 (yul
In message you wrote:
>
> I would recommend not to try old versions of U-Boot ("from 2.4") with new
> linux kernels ("2.6").
> We had some troubles with invalid memory mappings in this configuration.
It is of course always a good idea to use the latest and greatest
versions of the softwar
://ozlabs.org/pipermail/linuxppc-embedded/attachments/20060801/241c7e88/attachment.htm
15 matches
Mail list logo
