[RFC/PATCH] [POWER] mpc85xx_ds add DMA engine to the DT and parse it.

The DT entry is copy / paste from the documentation. Signed-off-by: Sebastian Siewior [EMAIL PROTECTED] --- arch/powerpc/boot/dts/mpc8544ds.dts | 41 ++ arch/powerpc/platforms/85xx/mpc85xx_ds.c | 13 + 2 files changed, 54 insertions(+), 0 deletions(-)

I2C device node on Sequoia (440EPx)

Hi I am using an AMCC 440EPx processor on Sequoia board with Linux 2.6.21 rc4. I am trying to use the i2c in the user-space In my Linux config file (Sequoia default) I have: CONFIG_I2C=y CONFIG_I2C_CHARDEV=y I than added the i2c-0 device in /dev (# mknod i2c-0 c 89 0) When I run a simple

Interrupt routing ARCH=ppc

Hi All, I am working on porting Linux 2.6.16.60 on PowerPC based board with Tsi109 system controller. Our platform support is defined in arch/ppc Here is our hardware interrupt routing Tsi109 PCI BUS (BUS 0) | | V VME controller (BUS 0 IDSEL 16) IRQ 36 PMC

bootstrap loader + gzip 1.3.5 -- huge image!?

hi list! I am using the xilinx git tree with the included bootstrap loader. Everthing works fine when i use binutils-2.16.1-gcc-3.4.6-uClibc-0.9.29. But when useing binutils-2.18.50-gcc-4.2.0-uClibc-0.9.29 (generated with buildroot) i get the following problem: At the end of the kernel

Re: bootstrap loader + gzip 1.3.5 -- huge image!?

I just recognized that gzip does his job right. But objcopy of all binutils 2.16.1 has problems during binary copy: powerpc-linux-objcopy -O binary vmlinux arch/ppc/boot/images/vmlinux.bin The vmlinux file does look good (what i can see with vi) but the generated vmlinux.bin file is strange.

Re: issue about CONFIG_PPC_MMU and CONFIG_SMP define

On Mar 10, 2008, at 3:15 PM, jie han wrote: Hi guys, I want to simulate compile mutli-core using sequoia(IBM/AMCC 44x processor) source code under kernel arch/powerpc directory.I want to define CONFIG_SMP, I sould define CONFIG_STD_MMU at first,but AMCC 44x don't need to config

[PATCH] Ported Xilinx GPIO driver to OpenFirmware.

From: Magnus Hjorth [EMAIL PROTECTED] Added of_device structure and init code. Basic functionality tested (LED:s on/off). Added code to validate channel number in ioctl. Signed-off-by: Magnus Hjorth [EMAIL PROTECTED] --- Patch against Xilinx GIT tree (commit 7fb2b...) Did this as a

RE: [PATCH] Ported Xilinx GPIO driver to OpenFirmware.

Thanks Magnus! Generally speaking this looks reasonable. Some comments: struct xgpio_instance { struct list_head link; unsigned long base_phys;/* GPIO base address - physical */ unsigned long remap_size; - u32 device_id; + u32 device_id; /* Dev

wait_event_interruptible does not wake_up

Can I ask you kernel gurus here for some advice? I am using Linux 2.4.25 on an Freescale MPC5200B IceCube development board. I have some trouble waking a user process sent to sleep with wait_event[_interruptible]. 99% of the time it works fine, but sometimes when I call wake_up(), my user

Re: [RFC/PATCH] [POWER] mpc85xx_ds add DMA engine to the DT and parse it.

On Mar 11, 2008, at 5:39 AM, Sebastian Siewior wrote: The DT entry is copy / paste from the documentation. Signed-off-by: Sebastian Siewior [EMAIL PROTECTED] --- arch/powerpc/boot/dts/mpc8544ds.dts | 41 + + arch/powerpc/platforms/85xx/mpc85xx_ds.c | 13

The question about the QUICC ENGINE microcode for freescale

Couple of thoughts, is that according to Freescale specs, the QE can only support TWO 1000Mbit end points. And that is assuming RAW traffic, not protocol layer processing. Since the 8360E has two QUICC Engines, that is only 1000Mbits data per Engine. Are you intending to get 1000Mbits TX and RX on