o has experience can give me
some advice? How can I increase the written speed?
Best Regards!
Leo.
Dear all,
I am using ELDK-3.0, and porting the linux-2.4.24 to my MPC8247 board,
U-Boot-1.0.2 ran ok. Current problems as follows:
1. If turn on the data cache, the linux kernel can't start up, it hang when
executing follows instruction:
/* stack */
addir1,r2,TASK_UNION_SIZE
Dear all,
I am using ELDK-3.0, and porting the linux-2.4.24 to my MPC8247 board,
U-Boot-1.0.2 ran ok. Current problems as follows:
1. If turn on the data cache, the linux kernel can't start up, it hang when
executing follows instruction:
/* stack */
addir1,r2,TASK_UNION_SIZE
Hi all,
I am porting linux to my MPC852 board, and linux now can runs ok, but it
seems that the DOC2000 is unstable! My system config as follows:
MCU: MPC852T 80M
SDRAM: 32MB
FLASH: 2MB
DOC2000: 32MB
I make a EXT2 file system on DOC2000, but sometimes, turn off the
board's power when linux is ru
Hi,
MPC852T target board with 8MB flash, which kind foot file system is the
best selection among of:
1. Cramfs
2. EXT2
3. JFFS2
4. RAMDISK
Thanks advance!
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Hi all,
i am newbee in Linux PPC. i have problem with my lite5200 board. previously
it has been installed with uboot. but now i dont receive any message from
uboot in the serial line (serial line is ok with 115200 bps - tested).
how can i re-flash the uboot inside the MPC5200? i use bdi2000, comp
