utting them in [global]?
>
>
>
> Thanks,
>
> Jake
>
>
>
> *From:* John Koch via Linuxptp-users
>
> *Sent:* Tuesday, August 29, 2023 10:30 PM
> *To:* Richard Cochran
> *Cc:* linuxptp-users@lists.sourceforge.net
> *Subject:* Re: [Linuxptp-users] Mult
Linuxptp-users
Sent: Tuesday, August 29, 2023 10:30 PM
To: Richard Cochran
Cc: linuxptp-users@lists.sourceforge.net
Subject: Re: [Linuxptp-users] Multiple interfaces with different PTP
implementations
I have continued to experiment with this and have been unable to figure out how
to implement an
I have continued to experiment with this and have been unable to figure out
how to implement an 802.1AS automotive master and 1588 slave in a single
configuration file. Any additional guidance would be appreciated.
On Mon, Aug 14, 2023 at 2:27 PM John Koch wrote:
> I apologize for my ignorance b
I apologize for my ignorance but I'm not sure how to implement that all in
a single configuration file. I currently have two very generic
configuration files. The first is used on the primary interface as the 1588
slave:
*[global]*
*slaveOnly 1*
*time_stamping hardware*
*step_threshold 1.0*
*d
On Fri, Aug 11, 2023 at 12:32:24PM -0600, John Koch via Linuxptp-users wrote:
> I was wondering what the best way to configure ptp4l and phc2sys in the
> following configuration would be.
>
> There is a 1588 IPv4 PTP master present on the network. My computer has
> several NICs which have PTP hard
I was wondering what the best way to configure ptp4l and phc2sys in the
following configuration would be.
There is a 1588 IPv4 PTP master present on the network. My computer has
several NICs which have PTP hardware support, one of them is plugged into
the network with the 1588 IPv4 master. I also
