On Mon, 18 May 2015 09:12:24 -0400 ED Fochler <soek...@liquidbinary.com> wrote:
> I’m still running 2.1.5 as the 2.2 series has not been happy on my soekris > boxes. Will test again soon. > > I’ve also stopped seeing any performance benefit from the hifn encryption > card for any of my uses. Perhaps you see different, but the only supported > encryption on that card (aes-cbc) is no longer favored as cbc has some > tendency to leak bits of information if attacked. The Geode CPU has nearly > the same hardware acceleration capabilities, so I’d abandon the hifn card. > > ED. Ed, thanks for the feedback. I got it running 2.1.5 i386 nanobsd, and all my tests pass fine. Maybe I have to wait till 2.3.x to update. [2.1.5-RELEASE][math...@xxx.xxx]/home/matheus(1): w 9:02AM up 2 days, 10:22, 2 users, load averages: 0.04, 0.04, 0.01 USER TTY FROM LOGIN@ IDLE WHAT root console - Mon10PM 2days - matheus pts/0 2x.x.*2 9:02AM - w no locks, even both wans have full throughput (10 and 5 Mbps), what when running 2.2.x got it frozen. I just need to boot 2.2.x, use for some time and access the webui. It locks. If I try the double wan iperf test, it locks faster. AFAIK, that config and only one wan got it more stable. Before the machine is to blame, I had it around 200+ days uptime not far ago. That was what got me. A great stable machine got to reboot more than once a day. So, 2.1.5 is the way to go here. thanks, matheus > > On 2015, May 18, at 8:58 AM, Nenhum_de_Nos <math...@eternamente.info> wrote: > > > > On Thu, 30 Apr 2015 08:30:24 -0300 > > Nenhum_de_Nos <math...@eternamente.info> wrote: > > > >> On Tue, 28 Apr 2015 09:56:28 -0300 > >> Nenhum_de_Nos <math...@eternamente.info> wrote: > >> > >>> Hi, > >>> > >>> Are there any known issues in this couple ? > >>> > >>> Since I updated to 2.2.x (never tried 2.2, just 2.2.1 and 2.2.2) I get a > >>> freeze when I access WebUI when uptime is past a little minutes. I was > >>> logged in via ssh, and the console got until this: > >>> > >>> > >>> Message from syslogd@cygnus at Apr 28 09:46:53 ... > >>> cygnus php-fpm[287]: /index.php: Successful login for user 'admin' from: > >>> 127.0.0.1 > >>> > >>> and after that it is dead. Seen it when at home some times, and now got > >>> it remote (need to arrive back home to power cycle it). > >>> > >>> I will try to downgrade to 2.1.5 and see if it is the same behaviour. > >>> > >>> Has anyone seen something alike ? > >>> > >>> thanks, > >>> > >>> matheus > >> > >> Hi again, > >> > >> I have been trying all kinds of stuff on this, no good news though. > >> > >> I changed PSU, changed harddisk (was CF card, changed CF card, changed to > >> harddisk), turned off an atheros pci AP, nothings seems to solve this. > >> Today, after some hours up, I tried to access the webui and it god locked > >> again. > >> > >> I will try the 2.1.5 version and then move back to vanila FreeBSD. > >> > >> If anyone have any hints, saw this elsewhere, please share :) > >> > >> this was a rock solid box, used to have 200+ days uptime. Now can't see > >> the sun rise twice :( > >> > >> thanks, > >> > >> matheus > > > > Hi, still no hope in here. > > > > I installed a 2.1.1 i386 nanobsd from scratch on another CF, had it running > > for some days and had no problem. Once I saw it stable, I tried the 2.2.2 > > i386 nanobsd, again, from the image and no old config reused. When I saw it > > stable for some time, around one day time, I tried the dual iperf test (two > > internet cable providers, 10Mbps and 5Mbps). Then after one night of iperf > > all along, I tried to log in on webui, and got the same crash as before. > > The serial console got me this: > > > > [2.2.2-RELEASE][r...@xxx.xxx]/root: > > Message from syslogd@xxx at May 17 20:08:00 ... > > cygnus php-fpm[5321]: /index.php: Successful login for user 'admin' from: > > 10.1.1.90 > > hifn0: rndtest: zeros interval 1 failed (2676, 2343-2657) > > hifn0: rndtest: zeros interval 1 failed (2342, 2343-2657) > > hifn0: rndtest: zeros interval 4 failed (384, 251-373) > > > > Message from syslogd@xxx at May 18 07:37: > > > > and then dead ... > > > > no ping answers, no http. > > > > By that time, no routing was done and I had to pull the power plug. > > > > So far, 2.1.x works but 2.2.x doesn't. > > > > has anyone seen this also using two cable ISP's ? > > > > I will go back to 2.1.5 and try. > > > > thanks (for no answer, so far :( ) > > > > matheus > > > > ps: this is a net5501-70 from soekris, using 3 types of CF cards so far. > > > > -- > > "We will call you Cygnus, > > the God of balance you shall be." > > _______________________________________________ > > pfSense mailing list > > https://lists.pfsense.org/mailman/listinfo/list > > Support the project with Gold! https://pfsense.org/gold > > _______________________________________________ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold -- "We will call you Cygnus, the God of balance you shall be." _______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
