By default, everything coming IN on the WAN is blocked but everything
coming IN on the LAN from the LAN network is allowed. You can easily remove
this rule on the LAN interface if you want.
On Nov 15, 2017 7:20 AM, "Roberto Carna" wrote:
People, I'm new at pfSense and
The official documentation mentions the explicit possibility of loading a
configuration on new hardware and nowhere does it mention needing to edit
the xml beforehand. I would think that hard to do with an encrypted xml
file. I've done both numerous times and personally I would think it
"should"
Is there a reason you're still on version 2.1.6?
On Jun 7, 2017 5:41 AM, "pfsense-l...@y-tech.co.il" <
pfsense-l...@y-tech.co.il> wrote:
> Hi all,
>
> I just encountered a major bug:
> Adding a new port forward rule caused a deletion of all firewall rules,
> ALL.
> I restored the configuration
I can confirm I've done this as well.
On Dec 7, 2016 11:36 AM, "Christoph Hanle"
wrote:
Hi,
short answer:
Yes !
I do it by: Create Alias / Type: Host(s) /
IP or FQDN, this can also be an Alias, i found that the Alias is not
(!) limited to be a single IP, can be an
Access point and captive portal should help.
On Jul 13, 2016 5:52 PM, "Alfredo Tapia Sabogal"
wrote:
> Hi everybody is any way to block or give an wifi access to certain people
> only? Should i insert a wireless nic card to our pfsense and buy an access
> point as well
I've had OpenVPN set up with around 20 remote sites for years. Fairly low
bandwidth but I prefer the configuration myself. My remote sites don't
route all traffic back to HQ ; It all depends on the routes you push to the
remote sites.
___
pfSense mailing
You may want to look into this recent post: https://blog.pfsense.org/?p=1773
Seems quite a bit of work is already going into updating the GUI.
--
Oliver Hansen
On Tue, Jun 30, 2015 at 7:35 AM, Ryan Coleman ryan.cole...@cwis.biz wrote:
What I think really needs to be added is a little device
Walter mentioned it. And that's the same problem I've had before.
On Feb 23, 2015 8:15 PM, Ryan Coleman ryan.cole...@cwis.biz wrote:
No one has mentioned that you haven’t stated if you had a Null Modem cable.
Do you have a Null Modem cable or a simple Pass-through one?
On Feb 23, 2015, at
Haven't tried it but it would seem you could add a simple script to the end
of the OpenVPN connection configuration that would open the web address
after they connect.
On Dec 31, 2014 9:46 AM, Jean-Stéfane Bergeron j...@jsbergeron.ca wrote:
Good day,
I am hoping you guys might be able to help
What does the allow rule on the restricted vlan and the NAT rule look like?
On Dec 11, 2014 11:24 PM, Ryan Clough ryan.clo...@dsic.com wrote:
I am hoping that one of you out there can assist me with this rather
interesting problem I am having. Let me set the stage.
I am running the latest
I believe in the settings tab for RRD there is a reset option.
I've had to reset mine after almost every upgrade since 2.1.
On Nov 5, 2014 8:39 AM, Olivier Mascia o...@integral.be wrote:
Hello,
Checking the logs, I get 5 or 6 errors similar to this one when accessing
the Status - RRD Graphs
Status - Traffic Graph is where I usually look in the GUI.
On Sep 24, 2014 7:25 AM, Muhammad Yousuf Khan sir...@gmail.com wrote:
hi guys actually i want to check which IP is using most of the internet
traffic. i see pftop a bit confusing i tried changing sorting via o but
it is still
You didn't mention which version of pfSense you're on but Status - Traffic
Graph has shown the IP using the bandwidth live to the right of the graph
for a while now. At least 2.1.
--
Oliver Hansen
On Wed, Sep 24, 2014 at 8:04 AM, Muhammad Yousuf Khan sir...@gmail.com
wrote:
Darkstat
I had similarly unreliable connections from the UML290 but in my case the
Verizon signal was poor in that area.
I had some luck at one point running a program on the modem from a PC that
forced it to only use 4G as it seemed to have more problems when switching
from 3G to 4G and back. That was
I would think it's pretty simple if you have a vlan capable switch. Just
connect the router to the switch on a trunk port and other devices off of
the switch on specific vlans.
On Aug 16, 2014 10:48 AM, Bob Gustafson bob...@rcn.com wrote:
I have a small Alix board with only one Ethernet
Usually when I see that message it's because DNS is not configured
correctly on the box.
On Jul 10, 2014 9:44 AM, Brian Caouette bri...@dlois.com wrote:
The update from 2.1.3 to 2.1.4 failed hard for me. I got a unable to load
kernel message on reboot. That said I reinstalled and am rebuilding
If possible, using OpenVPN for this is the easiest to configure IMO. You
can just push the routes in your VPN configuration.
I believe the wiki has good instructions for this.
On May 15, 2014 2:22 PM, Alex Threlfall a...@cyberprog.net wrote:
Hi All,
I currently have a number
One way would be to backup the system then manually edit the XML to remove
any portions relating to the traffic shaper. After that, restore the
configuration you edited.
--
Oliver Hansen
On Tue, Dec 3, 2013 at 8:41 AM, Ron Lemon r...@maplewood.com wrote:
I have a scrolling message about
On Sat, Oct 12, 2013 at 4:10 AM, Thinker Rix thinke...@rocketmail.comwrote:
On 2013-10-09 19:38, Jim Thompson wrote:
So asking the question is stupid
On 2013-10-09 19:50, Jim Thompson wrote:
IMO, this bullshit thread only serves to assist those asking the question
in stroking their own
- Original Message -
From: Adrian Wenzel adr...@lostland.net
To: pfSense support and discussion list@lists.pfsense.org
Sent: Saturday, October 12, 2013 10:41:40 AM
Subject: Re: [pfSense] naive suggestion: conform to US laws
snip
I can't say I agree with Thinker Rix on everything but on
Try throwing in a second USB stick and install to that one.
___
List mailing list
List@lists.pfsense.org
http://lists.pfsense.org/mailman/listinfo/list
On Mon, Apr 29, 2013 at 7:36 AM, Drew Lehman dleh...@digitatech.com wrote:
I could, but it's not the only thing I use the VPN for. I use it when
using hotspots and on my phone when I'm using a public WiFi. I also have
kids, and I want to make sure that I don't run afoul of some over-zealous
On Sep 29, 2012 1:36 PM, Johnny mill...@cinci.rr.com wrote:
Hey guys I am currently running ipcop 2.0 and thinking about switching
over to pfsense. (tired of the slooowww updates) I have my ipcop box setup
as follows.
1 nic is on green
1 nic is on red
1 nic is on blue – Wi-Fi, I have a
While it indeed does work that way, it doesn't really make sense to me.
If I cannot import selected sections from a full config.xml, what would
the select menu be good for?
And if I only have a partial config, say, I saved the aliases, then
obviously I would want to restore the aliases
On Jun 14, 2012 5:36 AM, Pankaj Kumar pankajnh...@gmail.com wrote:
I have PfSense2.0.1 installed with dual wan for load balancing purpose, i
want to know how to monitor the internet usage on LAN by host name or IP
who is using how much bandwidth
as well please assist me how to restrict the
On Thu, May 3, 2012 at 12:40 PM, justino garcia jgarciaitl...@gmail.comwrote:
Anyone here used the Netgate m1n1wall 2D3 / 2D13 Blue?
Does this unit run the full version of PFSense, and is 256 MB for a home
office deployment enough?
Do I need third nic, and separate my WLAN and lan, and then
.
--
Oliver Hansen
___
List mailing list
List@lists.pfsense.org
http://lists.pfsense.org/mailman/listinfo/list
way to achieve what we are looking for.
Thanks!
--
Oliver Hansen
___
List mailing list
List@lists.pfsense.org
http://lists.pfsense.org/mailman/listinfo/list
Ipsec works but I've found it much easier to use OpenVPN when that's an
option. Easier to do real routing as well.
On Mar 21, 2012 6:01 PM, Ugo Bellavance u...@lubik.ca wrote:
Hi,
For a simple site-to-site VPN (main office to DR site), what is most
recommended? I used IPSec in the past and
Yes that's correct.
___
List mailing list
List@lists.pfsense.org
http://lists.pfsense.org/mailman/listinfo/list
On Mar 5, 2012 2:27 AM, Orges Ndrecka orges.ndre...@corp.tring.al wrote:
Hello,
I cant find options in PfSense to assign hosts into different groups and
assign to each host separately bandwidth limits. I need to know if this
option is supported by PfSense in order to continue implement
On Feb 28, 2012 12:27 PM, Adam Piasecki apiase...@midatlanticbb.com
wrote:
On 2/28/2012 3:12 PM, Tim Nelson wrote:
Greetings-
I remember around the time of the 2.0 betas (or as an addon to the 1.x
branch), there was a way to see the bandwidth used per host. It was
displayed next to the SVG
On 12/4/2011 8:07 AM, Andreas Kaiser wrote:
Am 04.12.2011 um 16:08 schrieb Nabeel Hasan:
I have a 3G USB Modem Model number is ZTE FFF1. When I connect it to Windows
Platform it install its driver automatically. Now I want to use this USB
Broadband device with Pfsense. Please help me to
33 matches
Mail list logo