From: Giles Coochey gi...@coochey.netmailto:gi...@coochey.net
I'm not criticizing your choice configuration, there is absolutely no reason
not to use VLANs, however, in your design you appear to have a number of VLANs,
but I didn't see that (at the moment) you actually showed a need to be using
This should work wothout any special magic. Can a pc on a vlan segment ping
the gateway and reach internet?
Also did you configure the ip on the vlan interface or the physical? What
does a traceroute show if you trace to an unreachable part. Does arp
register hosts on the vlan interface?
-lsf
12.
This should work wothout any special magic. Can a pc on a vlan segment ping the
gateway and reach internet?
Also did you configure the ip on the vlan interface or the physical? What does
a traceroute show if you trace to an unreachable part. Does arp register hosts
on the vlan interface?
-lsf
Hi all,
I am struggling with routing between the different LAN interfaces I have set up.
I have 3 LAN I/F's where 2 are VLAN configured. I also have a fourth through
OpenVPN.
I have FW rules for all of the LANs with
PASS
Proto: IPv4*
Source *
Port *
Dest *
Port *
Gateway *
Queue none
I have
So, how many actual interfaces do you have, and how many subnets are there?
I am trying to understand what you mean by VLAN configured
I have an implementation with 3 different subnets each on their own
interface and pfsense routes between the subnets when rules allow for it.
On 08/09/2014
Mailing List
list@lists.pfsense.orgmailto:list@lists.pfsense.org
Date: Monday 8 September 2014 14:20
To: pfSense Support and Discussion Mailing List
list@lists.pfsense.orgmailto:list@lists.pfsense.org
Subject: Re: [pfSense] Routing between LAN interfaces
So, how many actual interfaces do you have
On 08/09/2014 14:02, Niklas Fondberg wrote:
I have 4 physical interfaces.
My setup looks like this:
Interface | Network port
———-|---
WAN (static ip/30)| em0
LAN (192.168.1.1/24)| em1 (default VLAN, not used)
DMZ (10.0.0.0/24)| VLAN2 on em2
ILO (10.2.0.0/24)| em3
@lists.pfsense.orgmailto:list@lists.pfsense.org
Subject: Re: [pfSense] Routing between LAN interfaces
On 08/09/2014 14:02, Niklas Fondberg wrote:
I have 4 physical interfaces.
My setup looks like this:
Interface| Network port
|---
WAN (static ip/30)| em0
LAN (192.168.1.1/24
On 08/09/2014 16:50, Niklas Fondberg wrote:
Hello Giles,
I am grateful for your concern regarding my ip-design. We are however
content with it and we don’t have any plans to change it.
I need VLAN either configured in the switch or in the machine and I
prefer to configure it in the machines.
