On Mon, Jul 28, 2014 at 11:53 AM, Satvinder Singh
satvinder.si...@nc4worldwide.com wrote:
Am I missing something?
The load balancer is sending the packets using the original IP. Since all
machines can directly connect to each other, the reply goes directly from
VM1 to VM2 rather than back
So whats the deal with the hapv package? I can't surf when its active. I
also notice on the general tab.
File scannerScanner status
Path:
Enter file path or catalog for scanning.
_Squid cache path (scan you squid
I had to restore a config from a 2.1.4 system to new hardware. The original
system had
vlans and as expected the restore prompted to re-assign the opt interfaces as
the nic
types were different but I had to reset the vlans first. After rebooting, it
kept asking for
the wan/lan assignment and
The new hardware has new MAC Addresses - they are assigned based on the MAC and
not LAN1, LAN2 and LAN3.
On Jul 29, 2014, at 18:06, Joseph L. Casale jcas...@activenetwerx.com wrote:
I had to restore a config from a 2.1.4 system to new hardware. The original
system had
vlans and as expected
The new hardware has new MAC Addresses - they are assigned based on the MAC
and not LAN1, LAN2 and LAN3.
Not from the two systems I just checked...
___
List mailing list
List@lists.pfsense.org
https://lists.pfsense.org/mailman/listinfo/list
So 1 out of 3 upgrades failed to re-assign the NICs? What are you saying?
On Jul 29, 2014, at 18:22, Joseph L. Casale jcas...@activenetwerx.com wrote:
The new hardware has new MAC Addresses - they are assigned based on the MAC
and not LAN1, LAN2 and LAN3.
Not from the two systems I just