Re: [pfSense] 2 networks Cards, but OPT1 not acess internet.
And you need to add a nat rule for the opt1 network as well. Either that or turn of nat on pfsense and add routes on your router to all networks behind your pfsense. -lsf On Fri, Sep 23, 2016, 21:48 Moshe Katz wrote: > You need to add a firewall rule on the OPT1 interface to allow outgoing > traffic. The easiest way is to copy the outgoing rule from LAN to OPT1. > > If you do not want hosts on LAN and OPT1 to access each other, you will > also need to add "DENY" rules to LAN and OPT1 that are above the default > outgoing traffic rule on each interface. > > > Moshe > > -- > Moshe Katz > -- mo...@ymkatz.net > -- +1(301)867-3732 > > On Fri, Sep 23, 2016 at 2:03 PM, Rodrigo Cunha > wrote: > > > Ii list, have a problem > > I make 2 networks wich 2 private ips diferents i have three diferents > > enernet cards. > > the Pfsense generator 3 names for this cards > > 1º WAN > > 2º LAN > > 3ª OPT > > In Wan, i set up this card in IP 192.168.0.2/24 with ip my GateWay > > 192.168.0.1. > > In my LAN I set up this card in IP 192.168.1.1/24 > > In my OPT1 set up this card in ip 192.168.2.1/24 > > The problem. > > My Network card OPT1 not acess internet, but the Card LAN by default is > the > > Gateway the network 192.168.1.0/24 but the OPT1 is not a Gateway with > > acess > > internet. > > I think is not error, i think this is default configuration. > > Other detail, i dont a have routing betwen 192.168.1.1/24 and > > 192.168.2.1/24 > > i a have only internet acess for this two networks . I just want hosts > > access their respective networks. > > > > > > > > > > -- > > Atenciosamente, > > Rodrigo da Silva Cunha > > ___ > > pfSense mailing list > > https://lists.pfsense.org/mailman/listinfo/list > > Support the project with Gold! https://pfsense.org/gold > ___ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] 2 networks Cards, but OPT1 not acess internet.
You need to add a firewall rule on the OPT1 interface to allow outgoing traffic. The easiest way is to copy the outgoing rule from LAN to OPT1. If you do not want hosts on LAN and OPT1 to access each other, you will also need to add "DENY" rules to LAN and OPT1 that are above the default outgoing traffic rule on each interface. Moshe -- Moshe Katz -- mo...@ymkatz.net -- +1(301)867-3732 On Fri, Sep 23, 2016 at 2:03 PM, Rodrigo Cunha wrote: > Ii list, have a problem > I make 2 networks wich 2 private ips diferents i have three diferents > enernet cards. > the Pfsense generator 3 names for this cards > 1º WAN > 2º LAN > 3ª OPT > In Wan, i set up this card in IP 192.168.0.2/24 with ip my GateWay > 192.168.0.1. > In my LAN I set up this card in IP 192.168.1.1/24 > In my OPT1 set up this card in ip 192.168.2.1/24 > The problem. > My Network card OPT1 not acess internet, but the Card LAN by default is the > Gateway the network 192.168.1.0/24 but the OPT1 is not a Gateway with > acess > internet. > I think is not error, i think this is default configuration. > Other detail, i dont a have routing betwen 192.168.1.1/24 and > 192.168.2.1/24 > i a have only internet acess for this two networks . I just want hosts > access their respective networks. > > > > > -- > Atenciosamente, > Rodrigo da Silva Cunha > ___ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
[pfSense] 2 networks Cards, but OPT1 not acess internet.
Ii list, have a problem I make 2 networks wich 2 private ips diferents i have three diferents enernet cards. the Pfsense generator 3 names for this cards 1º WAN 2º LAN 3ª OPT In Wan, i set up this card in IP 192.168.0.2/24 with ip my GateWay 192.168.0.1. In my LAN I set up this card in IP 192.168.1.1/24 In my OPT1 set up this card in ip 192.168.2.1/24 The problem. My Network card OPT1 not acess internet, but the Card LAN by default is the Gateway the network 192.168.1.0/24 but the OPT1 is not a Gateway with acess internet. I think is not error, i think this is default configuration. Other detail, i dont a have routing betwen 192.168.1.1/24 and 192.168.2.1/24 i a have only internet acess for this two networks . I just want hosts access their respective networks. -- Atenciosamente, Rodrigo da Silva Cunha ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] bind DNS question
On 2016-09-23 12:24, Satish Patel wrote: Thanks! Even after restarting named data didn't move from .jnl file to zone.DB file. any other stuff i should check ? rndc sync: sync [-clean] Dump changes to all dynamic zones to disk, and optionally remove their journal files. sync [-clean] zone [class [view]] Dump a single zone's changes to disk, and optionally remove its journal file. -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 214-642-9640 E-Mail: l...@lerctr.org US Mail: 17716 Limpia Crk, Round Rock, TX 78664-7281 ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] bind DNS question
Thanks! Even after restarting named data didn't move from .jnl file to zone.DB file. any other stuff i should check ? On Thu, Sep 22, 2016 at 3:02 PM, Steve Yates wrote: > It will eventually be stored in the .db but not immediately. > > http://serverfault.com/questions/560326/ddns-bind-and-leftover-jnl-files > > Before you get worried about the question, read comment "...even if the > change is only in the jnl file, it should always resolve correctly." > > Also, " Restarting named will flush updated data from .jnl files back to the > zone file." > > -- > > Steve Yates > ITS, Inc. > > -Original Message- > From: List [mailto:list-boun...@lists.pfsense.org] On Behalf Of Satish Patel > Sent: Thursday, September 22, 2016 1:55 PM > To: m...@fuckaround.org; pfSense Support and Discussion Mailing List > > Subject: Re: [pfSense] bind DNS question > > Does that means dynamic update will stored in Journal file right? it won't be > visible in Zone.DB file > > On Thu, Sep 22, 2016 at 2:35 PM, Pol Hallen wrote: >>> Does dynamic DNS stored in .jnl file? >> >> >> It's a journal file: The journal file is used not only for replaying >> updates not yet committed in the zone file, but also to provide the >> data for incremental zone transfers (IXFR). >> >> Pol > ___ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
