There is an on-board UART to USB converter on the
RCC-VE/DFFv2/4860/8880/2440/2220. This is wired directly to the
chipset uart on the Rangely, at system voltage levels, not at RS232
levels. (The USB convert chip is cost comparable to a RS-232 voltage
driver chip in cost, and has a smaller board
We are having some problem with apparent bounces, this is a test. No
need to reply.
I'll announce when everything is back to normal.
Thanks
Jeremy Porter
___
pfSense mailing list
https://lists.pfsense.org/mailman/listinfo/list
Support the project
I'd just like to point out, that the Webui installs binaries via PBI
into different locations, than the pkg installer does, and this is likely to
cause problems mixing them. Installing packages via pkg that are
already in the pfsenes package repo is likely to cause a lot of grief
down the road.
On 2/4/2015 10:44 AM, Vinícius Zavam wrote:
vinicius.zavam@egypcio:~ % ssh -6 -l noc -p 22085
2001:::::
Last login: Wed Jan 28 16:26:47 2015 from
2001:::::fb5d
export: Command not found.
https://redmine.pfsense.org/
On 1/27/2015 6:46 AM, Ryan Coleman wrote:
It wouldn't hurt to include a link...
--
Ryan Coleman
On Jan 27, 2015, at 05:57, Jim Thompson j...@smallworks.com
mailto:j...@smallworks.com wrote:
open a bug report.
On Jan 27, 2015, at 3:51 AM, WolfSec-Support
The configuration your trying to use in pfsense is TLS Authentication,
which is a static (shared) TLS key.
In the Server Mode box, you need to select SSL/TLS or SSL/TLS User
authentication.
You will need to configure your CA and Openvpn server keys under the
System-Cert Manager settings.
On
I've forced an update on the firewalls for the bogon, list, that protect
files/updates.pfsense.org. This should resolve your issue.
On 9/29/2014 6:37 AM, Andrew Mitchell wrote:
Thanks for the info.
I've been working working on this all night on and off.
My questions to you guys is, does
Two things would be helpful, did the system start as a clean 2.1.4 or
was it upgraded from a previous version, if so what versions?
I've seen a couple of odd cases, but usually where a system was upgraded
several times. There might have been an issue around 2.03(p1) or so.
We haven't been able
There was an issue with some production services at our datacenter,
everything should be back to normal now.
On 8/8/2014 3:53 PM, David White wrote:
Everything was down for me as well, but looks like the website is back
up. I haven't tried packages in a while, but will come back to it
On 7/14/2014 6:40 AM, Renato Botelho wrote:
On Jul 13, 2014, at 21:43, Lyle Giese l...@lcrcomputer.net wrote:
I have a Soekris net4801, running 2.0.2-release(i386) NanoBSD Size 512mb.
It shows 2.1.2-release is available for auto-update.
After downloading, I get an error message that the
There is a IPv6 routing issue internal, I'm taking a look at it right now.
On 5/2,62014 11:32 AM, Hakisho Nukama wrote:
On Mon, May 26, 2014 at 2:18 PM, Nishant Sharma codemarau...@gmail.com
wrote:
Hi,
https://packages.pfsense.org/xmlrpc.php is giving error:
faultCode 105 faultString XML
This should be fixed now. Parts of our Ipv6 network were not routing
outside.
On 5/26/2014 11:32 AM, Hakisho Nukama wrote:
On Mon, May 26, 2014 at 2:18 PM, Nishant Sharma codemarau...@gmail.com
wrote:
Hi,
https://packages.pfsense.org/xmlrpc.php is giving error:
faultCode 105 faultString
On 5/6/2014 5:54 AM, Odette Nsaka wrote:
Hi all, thanks for the great job.
I don't see upgrades to 2.1.3 for nanoBSD VGA 512MB CF.
I managed upgrading that Alix by mounting an USB perndrive on /root and
everything was fine.
Please, should I wait for a 512 image, build an image on my own
I've posted in a separate thread about issues with upgrading, even with
a 4 GB card. This is an on Alix 2d13 with 256 Mbytes of RAM.
Both from the GUI and the serial console, it appears that the new image
successfully downloads and installs into the second partition, but the
second
On 5/6/2014 2:16 PM, Vick Khera wrote:
I have the dual ALIX RM1U box from netgate which is a bit over 2 years old
now (and an older one too!)
Has anyone attempted replacing the ALIX boards with APU2 boards? They
appear to use the identical openings and case mounting holes.
Netgate
On 4/20/2014 4:13 PM, Volker Kuhlmann wrote:
On Sun 20 Apr 2014 19:46:41 NZST +1200, Bryan D. wrote:
I reported this issue with the HME's a while ago (it's nasty!):
bug #3481 -- https://redmine.pfsense.org/issues/3481
Executive summary: replace the NIC with a different model. Too bad,
they
On 4/10/2014 5:52 PM, Volker Kuhlmann wrote:
On Fri 11 Apr 2014 09:27:07 NZST +1200, Jim Thompson wrote:
It was posted on announce@, but it seems that I’m moderated there. This
is why my 2.1.1 release announcement was also held. I’ve pushed the message
through.
Setup glitches. Thanks!
What hardware is this running on, and what auto-update URL was your
system previously set to?
What variant are you using, Nano/Full Install?
If you have a config file, from prior to the upgrade, just install 2.1.1
of your preference, and upload your config.
The config file contains the RRD
There was an error in one of the version number strings, this has been
fixed. (It didn't replicate to one of the mirrors correctly.)
Auto-update is just a quick link to the upgrade system, it dose not
automatically upgrade the firewall without clicking on it,
so if your firewall is offline,
On 2/25/2014 12:45 PM, David Burgess wrote:
pfsense 2.1 amd64
From the RFC:
When a DHCP client requests the Classless Static Routes option and
also requests either or both of the Router option and the Static
Routes option, and the DHCP server is sending Classless Static Routes
On 9/25/2013 3:17 PM, Adam Thompson wrote:
On 2013-09-19 00:14, Adam Thompson wrote:
I'm having difficulty adding a static route that points to another
router on the WAN subnet. I think I just found the problem, in
/tmp/rules.debug:
pass out route-to ( lagg0_vlan2 184.70.48.185 ) from
On 9/5/2013 7:57 AM, Jim Pingle wrote:
On 9/4/2013 8:33 PM, Robert Guerra wrote:
Curious on people's comments on types of routers, firewalls and other
appliances that might be affected as well as mitigation strategies. Would
installing a pfsense and/or other open source firewall be helpful
I can't see this is a netflix issue specifically. Perhaps is some type
of DNS or IPv6 difference?
The forum post talks about an issue with chromecast setup. But its hard
to see how that would impact netflix streaming to other devices.
I'm running 2.1 (and have been) with no problems with
If the phones don't work over the VPN, and, the VPN is allow all, its
unlikely to be pfSense. However SIP is tricky, in that as a protocol is
has very limited support for NAT. PfSense doesn't have a SIP
application layer gateway so we don't modify the settings.
However some SIP devices try to
24 matches
Mail list logo