Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata

: Wednesday, May 16, 2018 9:14 AM To: pfSense Support and Discussion Mailing List <list@lists.pfsense.org> Subject: RE: [pfSense] Upgrades to 2.4.3.x failing after updating metadata Huh, I should remember to look there first. So used to this list.  The "sort of scary" part is comments

Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata

Lots of ISPs still make you do that for managed circuits. ⁣Sent from BlueMail ​ On May 17, 2018, 10:56, at 10:56, John Johnstone wrote: >On 5/16/18 12:25 PM, WebDawg wrote: > >> It is high risk compared to serial, but when you are doing the job >>

Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata

On 5/16/18 12:25 PM, WebDawg wrote: It is high risk compared to serial, but when you are doing the job remotely, and the pfsense device is your core router, how do I log in and see the serial data? Dial-up modem? Just couldn't resist... - John J.

Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata

I have to do these upgrades remotely, I have very little choice. What is the difference between executing the php installer via point and click and doing the upgrade via ssh? I see the entire upgrade, and the last thing I see before I get disconnected is the call for reboot. It is high risk

Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata

On Wed, May 16, 2018 at 10:50 AM, WebDawg wrote: > I upgrade via the console now. Not to say that the GUI is broken, but > I must have been a victim of when it was. I have seen what kpa is > talking about in that forum thread too. It is why I always ssh in and > update from

Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata

... -- Steve Yates ITS, Inc. -Original Message- From: List <list-boun...@lists.pfsense.org> On Behalf Of WebDawg Sent: Wednesday, May 16, 2018 9:50 AM To: pfSense Support and Discussion Mailing List <list@lists.pfsense.org> Subject: Re: [pfSense] Upgrades to 2.4.3.x failing after updating

Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata

rg> On Behalf Of John Kline > Sent: Tuesday, May 15, 2018 10:29 PM > To: pfSense Support and Discussion Mailing List <list@lists.pfsense.org> > Subject: Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata > > Many of us a e seeing this. > See:https://fo

Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata

iscussion Mailing List <list@lists.pfsense.org> Subject: Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata Many of us a e seeing this. See:https://forum.pfsense.org/index.php?topic=147853.0  On Tuesday, May 15, 2018, 7:53 PM, Steve Yates <st...@teamits.com> wrote: I upg

Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata

I just did the upgrade from the console from 2.4.3 to 2.4.3_1 with no problems in the upgrade. I run on an official pfSense brand C2758 device. On Tue, May 15, 2018 at 11:28 PM, John Kline wrote: > Many of us a e seeing this. >

Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata

Many of us a e seeing this. See:https://forum.pfsense.org/index.php?topic=147853.0  On Tuesday, May 15, 2018, 7:53 PM, Steve Yates wrote: I upgraded two routers from 2.4.2 to 2.4.3 and today to 2.4.3_1.  One is an SG-3100 and one is a PC.  On both, both times, the upgrade

[pfSense] Upgrades to 2.4.3.x failing after updating metadata

I upgraded two routers from 2.4.2 to 2.4.3 and today to 2.4.3_1. One is an SG-3100 and one is a PC. On both, both times, the upgrade almost immediately fails, but if I try again it works. I click the pending-update icon on the dashboard to go to System Update and it detects the update. I