Pls check rule
Wan rule : source lan destination any your VPN port 1194.
If still not work go to your interface then uncheck two options. Block...
Regards
mohan
On Feb 19, 2016 3:25 AM, "Richard Lussier"
wrote:
> Hi, This option is not available on a site to site
Hi, This option is not available on a site to site ssl/tls server
If it's a fully routed network, my next step would be to use traceroute on both
ends to see where it's getting hung up at.
Doug
Got it Doug
On the server side, the rule on openvpn destination had to be to "any"
instead of
>>> Hi, This option is not available on a site to site ssl/tls server
If it's a fully routed network, my next step would be to use traceroute on both
ends to see where it's getting hung up at.
Doug
___
pfSense mailing list
Hi,
This option is not available on a site to site ssl/tls server
On 2016-02-18 13:15, Doug Lytle wrote:
On Feb 18, 2016, at 1:01 PM, Richard Lussier richard.luss...@inter-node.com
wrote:
each client connects well to server but wont reach other clients..
any ideas ?
On the OpenVPN Server did
>>> On Feb 18, 2016, at 1:01 PM, Richard Lussier richard.luss...@inter-node.com
>>> wrote:
>>> each client connects well to server but wont reach other clients..
>>> any ideas ?
On the OpenVPN Server did you check the option:
Allow communication between clients connected to this server
Doug
Hi,
I have a multi site setup with 1 server and 4 clients. v 2.2.6 release
The clients have to reach each other.
Clients cannot see each others.
My wans are set to 1.1.1.2 thru 1.1.1.6 in a simple switch
The server is set as described in the pfsense book 21draft :
- Local and remote networks