This morning I logged into the router to bring up the dashboard as I usually
do. I began my day and some time later I revisited the dashboard to check on
things and I get a 502 bad gateway error. I did not make any changes to the
config at all today. From the beginning I did enable https logi
On 07/08/2016 10:09 AM, Bill Arlofski wrote:
> I just realized something thanks to your post. It seems that I have also
> witnessed that OpenVPN stops working when this occurs.
It would depend on the type of OpenVPN. RA or SSL/TLS using certificates
would likely fail as the scripts the verify par
On 07/08/2016 03:21 AM, Chris Buechler wrote:
> It's worth trying at least. The case I had where that problem was
> replicable was worked around in 2.3.1_5 on this ticket.
> https://redmine.pfsense.org/issues/6318
>
> There may be a related issue still outstanding from that, as the root
> cause is
On 07/08/2016 02:44 AM, J. Echter wrote:
> Hi,
>
> same issue here. I cannot access OpenVPN after a while and locally i get
> bad gateway when connecting to pfSense webui.
>
> J
Yes!
I just realized something thanks to your post. It seems that I have also
witnessed that OpenVPN stops working
On 07/07/2016 02:50 PM, Vick Khera wrote:
> On Thu, Jul 7, 2016 at 2:16 PM, Bill Arlofski
> wrote:
>
>> I guess I will remove it the next time this happens and see if there is any
>> change.
>>
>
> It seems to me you should remove it *before* to see if you avoid it
> happening.
Hi Vick!
hehe
On Thu, Jul 7, 2016 at 1:16 PM, Bill Arlofski wrote:
> On 07/07/2016 08:09 AM, Jon Gerdes wrote:
>> Bill
>>
>> I maybe off target here but the IPSEC widget used to cause php-fpm
>> daemon to die after a few days.
>>
>> I haven't looked into it since but removing that widget fixed it for me
>> on t
i forgot to mention:
pfSense 2.3.1.
It works again if i restart php-fm.
J
___
pfSense mailing list
https://lists.pfsense.org/mailman/listinfo/list
Support the project with Gold! https://pfsense.org/gold
Am 05.07.2016 um 19:19 schrieb Bill Arlofski:
> Hi everyone...
>
> I noticed after one of the recent upgrades to the 2.2.x "RELEASE" series
> everything works perfectly fine for a while but then, I get "502 Bad Gateway"
> message when I attempt to access the web GUI.
>
> Up until recently, I ha
I run the widget on my dashboard without issue.
Please stop assuming there is a problem, and take steps to prove it instead.
-- Jim
> On Jul 7, 2016, at 1:16 PM, Bill Arlofski wrote:
>
>> On 07/07/2016 08:09 AM, Jon Gerdes wrote:
>> Bill
>>
>> I maybe off target here but the IPSEC widget us
On Thu, Jul 7, 2016 at 2:16 PM, Bill Arlofski
wrote:
> I guess I will remove it the next time this happens and see if there is any
> change.
>
It seems to me you should remove it *before* to see if you avoid it
happening.
___
pfSense mailing list
https
On 07/07/2016 08:09 AM, Jon Gerdes wrote:
> Bill
>
> I maybe off target here but the IPSEC widget used to cause php-fpm
> daemon to die after a few days.
>
> I haven't looked into it since but removing that widget fixed it for me
> on two pfSenses.
>
> Cheers
> Jon
Hi Jon,
Hmmm, I do have th
On Tue, 2016-07-05 at 13:19 -0400, Bill Arlofski wrote:
> Hi everyone...
>
> I noticed after one of the recent upgrades to the 2.2.x "RELEASE"
> series
> everything works perfectly fine for a while but then, I get "502 Bad
--- snip
>
> So, I am suspecting that the php-fpm process
Hi everyone...
I noticed after one of the recent upgrades to the 2.2.x "RELEASE" series
everything works perfectly fine for a while but then, I get "502 Bad Gateway"
message when I attempt to access the web GUI.
Up until recently, I had been "fixing" this by physically powering off the
firewall b
13 matches
Mail list logo