Hi, I can't get my wireless access point to work. I have an Atheros AR9280, a chip which appears to be well supported. After activating the interface the network is not visible from other hosts and I get the following log entries. I'm not sure if that's related to the actual problem.
kernel: ath0: unable to reset hardware; hal status 14 kernel: ath0: ath_chan_set: unable to reset channel 3 (2422 MHz, flags 0x480), hal status 14 kernel: ath0: ath_chan_set: unable to reset channel 4 (2427 MHz, flags 0x480), hal status 14 kernel: ath0: ath_chan_set: unable to reset channel 5 (2432 MHz, flags 0x480), hal status 14 kernel: ath0: ath_chan_set: unable to reset channel 8 (2447 MHz, flags 0x480), hal status 14 kernel: ath0: ath_chan_set: unable to reset channel 9 (2452 MHz, flags 0x480), hal status 14 kernel: ath0: ath_chan_set: unable to reset channel 10 (2457 MHz, flags 0x480), hal status 14 kernel: ath0: ath_chan_set: unable to reset channel 12 (2467 MHz, flags 0x680), hal status 14 kernel: ath0: unable to reset hardware; hal status 14 What is "hal status 14"? Furthermore, if I go to the "Status → Wireless" tab and do a "Rescan", no neighbouring networks show up. It might be a hardware issue or just a configuration error. I'd be glad if someone could help me to debug this. System ------ 2.1-RELEASE (amd64) built on Wed Sep 11 18:17:48 EDT 2013 FreeBSD 8.3-RELEASE-p11 Interface Configuration ----------------------- IPv4 Configuration Type : Static IPv4 IPv4 address : 10.0.30.1 Standard : 802.11b Channel : Auto Antenna settings : Default Default Mode : Access Point SSID : foobar Enable Hide SSID : no - no encryption (yet) - Let me know if I should provide more information. Best regards Marco _______________________________________________ List mailing list List@lists.pfsense.org http://lists.pfsense.org/mailman/listinfo/list