Hi,
This is something I have thought about also, this would be great.
As far as I know you can go back a couple of changes from the CLI.
Cheers,
Matt
2015-08-01 19:16 GMT+02:00 Rainer Duffner rai...@ultra-secure.de:
Hi,
we have a device from another manufacturer (it’s a WAF). Also
Yes that is possible, but locally managed.
I would prefer some SVN or git way.
2015-08-01 19:24 GMT+02:00 Tim Eggleston tim.li...@eggleston.ca:
It would be cool if pfSense supported a feature of this kind.
Diagnostics Backup/Restore Config History
Thanks,
Matt
___
pfSense mailing list
https://lists.pfsense.org/mailman/listinfo/list
Support the project with Gold! https://pfsense.org/gold
Are it virtual Machines ? if so, is Macspoofing enabled ?
2017-02-04 20:23 GMT+01:00 Daniel :
> Hi There,
>
> anyone can help me to debug my CARP problem?
> My Problem is that my CARP interfaces randomly toggle from Master to Backup
> and serval seconds later it toggles
/index.php?topic=28121.0
> <https://forum.pfsense.org/index.php?topic=28121.0>
>
>
>
>> On Oct 18, 2016, at 4:47 PM, Matt . <yamakasi@gmail.com> wrote:
>>
>> Hi Guys,
>>
>> Is there a way to find to have 2 nics (a bridge) where online
>> in
a bridge to two
other Pfsense boxes which do CARP on the connected interface between
the 2 boxes.
As Pfsense doesn't understand STP traffic doesn't float back over the
VIP which seems to be needed when coming from the single box over the
bridge.
Ideas are welcome.
Thanks,
Matt
dropped somewhere upstream. You can run
ping with a large packet size and the do not fragment bit set to check this.
E.g. 'ping -s 1472 -D some_internet_host'.
-Matt Smith
___
List mailing list
List@lists.pfsense.org
http://lists.pfsense.org/mailman
Are you trying to boot using a VGA/keyboard or connected to a serial port? Do
you see anything happening on the console? Or nothing at all?
As someone mentioned previously, kern.cam.boot_delay needs to be set to a
higher value when booting over USB. If you use a memstick image instead of the
Can you post screenshots of your LAN rules and your NAT outbound? Blank out
any information you don't want us to see.
Have you done a packet capture on the device that is being a problem?
IPv6 enabled on Pfsense?
On Tue, May 26, 2015 at 4:04 PM, Mamun Ahmed mamun.ah...@me.com wrote:
Thanks