Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata
FWIW I upgraded our SG-4860 pair and saw the same behavior, fails after the metadata update. I waited 5 minutes and it did not restart and saw no indication in system log it was going to, or upgrading. -- Steve Yates ITS, Inc. -Original Message- From: Steve Yates Sent: Wednesday, May 16, 2018 9:14 AM To: pfSense Support and Discussion Mailing List <list@lists.pfsense.org> Subject: RE: [pfSense] Upgrades to 2.4.3.x failing after updating metadata Huh, I should remember to look there first. So used to this list. The "sort of scary" part is comments like "Same thing here. The page reported the upgrade had failed. We waited about two minutes and the page refreshed and we logged in. The upgrade had worked after all." Like it's running in the background despite the failure? And I ran it a second time during this? That's what "KPA" posted last night: "The WebGUI upgrade still seems to suffer from the same problem as it did a while ago which is that it gets disconnected from the real upgrade run and reports a failure when the upgrade is actually running successfully in the background." -- Steve Yates ITS, Inc. -Original Message- From: List <list-boun...@lists.pfsense.org> On Behalf Of John Kline Sent: Tuesday, May 15, 2018 10:29 PM To: pfSense Support and Discussion Mailing List <list@lists.pfsense.org> Subject: Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata Many of us a e seeing this. See:https://forum.pfsense.org/index.php?topic=147853.0 On Tuesday, May 15, 2018, 7:53 PM, Steve Yates <st...@teamits.com> wrote: I upgraded two routers from 2.4.2 to 2.4.3 and today to 2.4.3_1. One is an SG-3100 and one is a PC. On both, both times, the upgrade almost immediately fails, but if I try again it works. I click the pending-update icon on the dashboard to go to System Update and it detects the update. I start and I get: ">>> Updating repositories metadata... done. 2.4.3_1 version of pfSense is available" Then a red bar at the top of the page, "System update failed!" If I click the already-highlighted System Update tab again, confirm the update, it then immediately installs. Is anyone else seeing this? -- Steve Yates ITS, Inc. ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata
Lots of ISPs still make you do that for managed circuits. Sent from BlueMail On May 17, 2018, 10:56, at 10:56, John Johnstonewrote: >On 5/16/18 12:25 PM, WebDawg wrote: > >> It is high risk compared to serial, but when you are doing the job >> remotely, and the pfsense device is your core router, how do I log in >> and see the serial data? > >Dial-up modem? Just couldn't resist... > >- >John J. >___ >pfSense mailing list >https://lists.pfsense.org/mailman/listinfo/list >Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata
On 5/16/18 12:25 PM, WebDawg wrote: It is high risk compared to serial, but when you are doing the job remotely, and the pfsense device is your core router, how do I log in and see the serial data? Dial-up modem? Just couldn't resist... - John J. ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata
I have to do these upgrades remotely, I have very little choice. What is the difference between executing the php installer via point and click and doing the upgrade via ssh? I see the entire upgrade, and the last thing I see before I get disconnected is the call for reboot. It is high risk compared to serial, but when you are doing the job remotely, and the pfsense device is your core router, how do I log in and see the serial data? On Wed, May 16, 2018 at 12:20 PM, Vick Kherawrote: > On Wed, May 16, 2018 at 10:50 AM, WebDawg wrote: > >> I upgrade via the console now. Not to say that the GUI is broken, but >> I must have been a victim of when it was. I have seen what kpa is >> talking about in that forum thread too. It is why I always ssh in and >> update from console. >> > > Wow. I call that a high risk upgrade method. Once it logs you out of ssh, > you just sit there and hope it comes back up. You need to hook your serial > port (or virtual serial port if you have a BMC that supports that) up as > the real device console so you can monitor the entire process. > ___ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata
On Wed, May 16, 2018 at 10:50 AM, WebDawgwrote: > I upgrade via the console now. Not to say that the GUI is broken, but > I must have been a victim of when it was. I have seen what kpa is > talking about in that forum thread too. It is why I always ssh in and > update from console. > Wow. I call that a high risk upgrade method. Once it logs you out of ssh, you just sit there and hope it comes back up. You need to hook your serial port (or virtual serial port if you have a BMC that supports that) up as the real device console so you can monitor the entire process. ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata
I've used the console in the recent past...there was something around the 2.3.3 upgrade where you had to switch it to the development branch and back again to get it to work: https://forum.pfsense.org/index.php?topic=125873.msg695386#msg695386 Overall seems like the GUI should work... -- Steve Yates ITS, Inc. -Original Message- From: List <list-boun...@lists.pfsense.org> On Behalf Of WebDawg Sent: Wednesday, May 16, 2018 9:50 AM To: pfSense Support and Discussion Mailing List <list@lists.pfsense.org> Subject: Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata I upgrade via the console now. Not to say that the GUI is broken, but I must have been a victim of when it was. I have seen what kpa is talking about in that forum thread too. It is why I always ssh in and update from console. On Wed, May 16, 2018 at 10:13 AM, Steve Yates <st...@teamits.com> wrote: > Huh, I should remember to look there first. So used to this list. > > The "sort of scary" part is comments like "Same thing here. The page > reported the upgrade had failed. We waited about two minutes and the page > refreshed and we logged in. The upgrade had worked after all." Like it's > running in the background despite the failure? And I ran it a second time > during this? That's what "KPA" posted last night: "The WebGUI upgrade still > seems to suffer from the same problem as it did a while ago which is that it > gets disconnected from the real upgrade run and reports a failure when the > upgrade is actually running successfully in the background." > > -- > > Steve Yates > ITS, Inc. > > -Original Message- > From: List <list-boun...@lists.pfsense.org> On Behalf Of John Kline > Sent: Tuesday, May 15, 2018 10:29 PM > To: pfSense Support and Discussion Mailing List <list@lists.pfsense.org> > Subject: Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata > > Many of us a e seeing this. > See:https://forum.pfsense.org/index.php?topic=147853.0 > > > > > On Tuesday, May 15, 2018, 7:53 PM, Steve Yates <st...@teamits.com> wrote: > > I upgraded two routers from 2.4.2 to 2.4.3 and today to 2.4.3_1. One is an > SG-3100 and one is a PC. On both, both times, the upgrade almost immediately > fails, but if I try again it works. I click the pending-update icon on the > dashboard to go to System Update and it detects the update. I start and I > get: > > ">>> Updating repositories metadata... done. > 2.4.3_1 version of pfSense is available" > > Then a red bar at the top of the page, "System update failed!" > > If I click the already-highlighted System Update tab again, confirm the > update, it then immediately installs. > > Is anyone else seeing this? > > -- > > Steve Yates > ITS, Inc. > > ___ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold > > > > ___ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold > ___ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata
I upgrade via the console now. Not to say that the GUI is broken, but I must have been a victim of when it was. I have seen what kpa is talking about in that forum thread too. It is why I always ssh in and update from console. On Wed, May 16, 2018 at 10:13 AM, Steve Yates <st...@teamits.com> wrote: > Huh, I should remember to look there first. So used to this list. > > The "sort of scary" part is comments like "Same thing here. The page > reported the upgrade had failed. We waited about two minutes and the page > refreshed and we logged in. The upgrade had worked after all." Like it's > running in the background despite the failure? And I ran it a second time > during this? That's what "KPA" posted last night: "The WebGUI upgrade still > seems to suffer from the same problem as it did a while ago which is that it > gets disconnected from the real upgrade run and reports a failure when the > upgrade is actually running successfully in the background." > > -- > > Steve Yates > ITS, Inc. > > -Original Message- > From: List <list-boun...@lists.pfsense.org> On Behalf Of John Kline > Sent: Tuesday, May 15, 2018 10:29 PM > To: pfSense Support and Discussion Mailing List <list@lists.pfsense.org> > Subject: Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata > > Many of us a e seeing this. > See:https://forum.pfsense.org/index.php?topic=147853.0 > > > > > On Tuesday, May 15, 2018, 7:53 PM, Steve Yates <st...@teamits.com> wrote: > > I upgraded two routers from 2.4.2 to 2.4.3 and today to 2.4.3_1. One is an > SG-3100 and one is a PC. On both, both times, the upgrade almost immediately > fails, but if I try again it works. I click the pending-update icon on the > dashboard to go to System Update and it detects the update. I start and I > get: > > ">>> Updating repositories metadata... done. > 2.4.3_1 version of pfSense is available" > > Then a red bar at the top of the page, "System update failed!" > > If I click the already-highlighted System Update tab again, confirm the > update, it then immediately installs. > > Is anyone else seeing this? > > -- > > Steve Yates > ITS, Inc. > > ___ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold > > > > ___ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold > ___ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata
Huh, I should remember to look there first. So used to this list. The "sort of scary" part is comments like "Same thing here. The page reported the upgrade had failed. We waited about two minutes and the page refreshed and we logged in. The upgrade had worked after all." Like it's running in the background despite the failure? And I ran it a second time during this? That's what "KPA" posted last night: "The WebGUI upgrade still seems to suffer from the same problem as it did a while ago which is that it gets disconnected from the real upgrade run and reports a failure when the upgrade is actually running successfully in the background." -- Steve Yates ITS, Inc. -Original Message- From: List <list-boun...@lists.pfsense.org> On Behalf Of John Kline Sent: Tuesday, May 15, 2018 10:29 PM To: pfSense Support and Discussion Mailing List <list@lists.pfsense.org> Subject: Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata Many of us a e seeing this. See:https://forum.pfsense.org/index.php?topic=147853.0 On Tuesday, May 15, 2018, 7:53 PM, Steve Yates <st...@teamits.com> wrote: I upgraded two routers from 2.4.2 to 2.4.3 and today to 2.4.3_1. One is an SG-3100 and one is a PC. On both, both times, the upgrade almost immediately fails, but if I try again it works. I click the pending-update icon on the dashboard to go to System Update and it detects the update. I start and I get: ">>> Updating repositories metadata... done. 2.4.3_1 version of pfSense is available" Then a red bar at the top of the page, "System update failed!" If I click the already-highlighted System Update tab again, confirm the update, it then immediately installs. Is anyone else seeing this? -- Steve Yates ITS, Inc. ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata
I just did the upgrade from the console from 2.4.3 to 2.4.3_1 with no problems in the upgrade. I run on an official pfSense brand C2758 device. On Tue, May 15, 2018 at 11:28 PM, John Klinewrote: > Many of us a e seeing this. > See:https://forum.pfsense.org/index.php?topic=147853.0 > > > > > On Tuesday, May 15, 2018, 7:53 PM, Steve Yates wrote: > > I upgraded two routers from 2.4.2 to 2.4.3 and today to 2.4.3_1. One is > an SG-3100 and one is a PC. On both, both times, the upgrade almost > immediately fails, but if I try again it works. I click the pending-update > icon on the dashboard to go to System Update and it detects the update. I > start and I get: > > ">>> Updating repositories metadata... done. > 2.4.3_1 version of pfSense is available" > > Then a red bar at the top of the page, "System update failed!" > > If I click the already-highlighted System Update tab again, confirm the > update, it then immediately installs. > > Is anyone else seeing this? > > -- > > Steve Yates > ITS, Inc. > > ___ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold > > > > ___ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold > ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] Upgrades to 2.4.3.x failing after updating metadata
Many of us a e seeing this. See:https://forum.pfsense.org/index.php?topic=147853.0 On Tuesday, May 15, 2018, 7:53 PM, Steve Yateswrote: I upgraded two routers from 2.4.2 to 2.4.3 and today to 2.4.3_1. One is an SG-3100 and one is a PC. On both, both times, the upgrade almost immediately fails, but if I try again it works. I click the pending-update icon on the dashboard to go to System Update and it detects the update. I start and I get: ">>> Updating repositories metadata... done. 2.4.3_1 version of pfSense is available" Then a red bar at the top of the page, "System update failed!" If I click the already-highlighted System Update tab again, confirm the update, it then immediately installs. Is anyone else seeing this? -- Steve Yates ITS, Inc. ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold