Is there any documentation on manually configuring the speed and duplex
settings on the thin clients? I don't remember reading anything of the
sort in the LTSP docs.
Thanks
Nathan Lavender
MCCSC
On Tue, 2002-11-05 at 15:40, Charles Marcus wrote:
> Sounds like either a bad NIC, or unmatched dup
Sounds like either a bad NIC, or unmatched duplex settings.
I would try first to make sure that both the switch/hub and the NIC are
set to full (or half) duplex manually.
Or, try a new NIC.
Charles
From: Nathan Lavender <[EMAIL PROTECTED]>
Date: 05 Nov 2002 14:42:10 -0500
I'm having a problem
On Tue, 2002-11-05 at 19:42, Nathan Lavender wrote:
> I'm having a problem getting my LTSP testing environment to consistently
> boot without errors. The initial boot goes very smooth, however, when I
> power the client off and back on to simulate a power outage I start to
> get inconsistent result
I'm having a problem getting my LTSP testing environment to consistently
boot without errors. The initial boot goes very smooth, however, when I
power the client off and back on to simulate a power outage I start to
get inconsistent results during booting.
After simulated power outage:
Terminal w
