Peter,
Sorry for the late response. I don't know if this will help you or not,
but below are the commands I ran to build the lustre client rpms on one
of our SLES systems:
nautilus:~ # cat /etc/SuSE-release
SUSE Linux Enterprise Server 11 (x86_64)
VERSION = 11
PATCHLEVEL = 1
nautilus:~ #
@lists.lustre.org; Chiu, Peter (STFC,RAL,RALSP)
Subject: RE: [Lustre-discuss] SLES 11 SP1 Client rpms built but not working
Understood, Andreas,
Just to supplement is that the same approach works for SLES 11 using a xen
kernel (2.6.27.54-0.2-xen).
The Lustre Client rpms works okay:
cmip-proc1:~ # cat
Dilger [mailto:adil...@whamcloud.com]
Sent: 10 May 2011 21:48
To: Chiu, Peter (STFC,RAL,RALSP)
Cc: lustre-discuss@lists.lustre.org
Subject: Re: [Lustre-discuss] SLES 11 SP1 Client rpms built but not working
On May 9, 2011, at 11:38, peter.c...@stfc.ac.uk peter.c...@stfc.ac.uk wrote:
The rpms
[mailto:adil...@whamcloud.com]
Sent: 10 May 2011 21:48
To: Chiu, Peter (STFC,RAL,RALSP)
Cc: lustre-discuss@lists.lustre.org
Subject: Re: [Lustre-discuss] SLES 11 SP1 Client rpms built but not working
On May 9, 2011, at 11:38, peter.c...@stfc.ac.uk peter.c...@stfc.ac.uk
wrote:
The rpms
; Chiu, Peter (STFC,RAL,RALSP)
Subject: Re: [Lustre-discuss] SLES 11 SP1 Client rpms built but not working
The only other potential problem I see is that you are using a xen kernel and
this us somehow causing problems.
Cheers, Andreas
On 2011-05-11, at 1:33 AM, peter.c...@stfc.ac.uk wrote:
Dear
On May 9, 2011, at 11:38, peter.c...@stfc.ac.uk peter.c...@stfc.ac.uk wrote:
The rpms lustre-modules, lustre and lustre-tests were then installed smoothly
without any complaints.
But the subsequent “modprobe lustre” will return a “Killed” message, with no
lustre module loaded.
dmesg
Hi all,
I used the method described below to build client rpms with the source kit
lustre-1.8.5.tar.gz.
There was only one error reported during the make rpms, relating to
lustre-iolit-1.2-root,
but the rpms were built under /usr/src/packages/RPMS/x86_64.
The rpms lustre-modules, lustre and
