On Wed, Jan 27, 2016 at 6:09 PM, Fajar A. Nugraha wrote:
>
>
>> eth2 already works. I set it up for testing outside of all containers
>> (i.e. on the host only). From the host:
>>
>>
> That doesn't match what you said earlier.
>
It actually does. Remember that this LXC host is a
On Thu, Jan 28, 2016 at 5:19 AM, Joshua Schaeffer
wrote:
>
> On Wed, Jan 27, 2016 at 2:39 PM, Fajar A. Nugraha wrote:
>>
>>
>> Is eth1 connected to your switch as trunk? If no (e.g. you have the same
>> settings for eth1 and eth2 on the switch side),
>>
On Thu, Jan 28, 2016 at 1:43 AM, Joshua Schaeffer
wrote:
> I'm trying to setup a container on a new VLAN that only allows tagged
> traffic and I'm getting varied success.
>
the other two NIC's (eth1 and eth2) are setup to connect to this VLAN (vlan
> id 500).
>
>
>
Dear Joshua,
you wrote, that there's a trunk on eth1 and eth2. But for eth2, i can't see any
VLAN (501 ?) detrunking as with eth1 & eth1.500. In the other hand you wrote,
that eth2 is working. Are you shure, that you realy receive this trunk of 3
VLANs on your both eth's?
I'm using a
On Wed, Jan 27, 2016 at 4:38 PM, Guido Jäkel wrote:
> Dear Joshua,
>
> you wrote, that there's a trunk on eth1 and eth2. But for eth2, i can't
> see any VLAN (501 ?) detrunking as with eth1 & eth1.500. In the other hand
> you wrote, that eth2 is working. Are you shure, that you
I'm trying to setup a container on a new VLAN that only allows tagged
traffic and I'm getting varied success. Maybe somebody can point me in the
right direction. I can ping the gateway from the host but not from the
container and I can't see what I'm missing. I'm using LXC 1.1.5 on Debian
Jessie.