Performance issues with networking and veth devices can be often
linked to the implementation of hardware acceleration in various
kernel drivers for various NICs. I found this from a lot of toggling
of the acceleration tunables with ethtool. I'm sure there's a deeper
issue with the drivers, but it
On 05/28/2010 02:58 AM, Toby Corkindale wrote:
> On 28/05/10 05:55, Matt Bailey wrote:
>> /usr/sbin/ethtool -K br0 sg off
>> /usr/sbin/ethtool -K br0 tso off
>>
>> Might fix your problem, YMMV; this worked for me.
>
> Bam! Problem fixed.
> All I needed was the 'sg' option - tso wasn't enabled anywa
On 28/05/10 05:55, Matt Bailey wrote:
> /usr/sbin/ethtool -K br0 sg off
> /usr/sbin/ethtool -K br0 tso off
>
> Might fix your problem, YMMV; this worked for me.
Bam! Problem fixed.
All I needed was the 'sg' option - tso wasn't enabled anyway.
Now getting a healthy 15-16 mbyte/sec.
Thanks for th
On 27/05/10 19:52, Daniel Lezcano wrote:
> On 05/27/2010 10:21 AM, Toby Corkindale wrote:
>> On 27/05/10 18:06, atp wrote:
>> As requested:
>>
>>
>>> ifconfig br0 from the host
>> br0 Link encap:Ethernet HWaddr 00:1e:37:4d:8c:d8
>> inet addr:192.168.1.206 Bcast:192.168.1.255 Mask:255.255.255.0
>> i
/usr/sbin/ethtool -K br0 sg off
/usr/sbin/ethtool -K br0 tso off
Might fix your problem, YMMV; this worked for me.
--
Matt Bailey
303.871.4923
Senior Software Specialist
University of Denver, UTS
http://du.edu
http://system42.net
On Thu, May 27, 2010 at 4:48 AM, atp wrote:
> Toby
>
> Just FYI
Toby
Just FYI in case you were unaware - it seems one of your MXs is black
holed.
I tried to email you direct, but messagelabs said;
:
74.125.148.10 does not like recipient.
Remote host said: 554 5.7.1 Service unavailable; Client host
[74.125.149.113] blocked using sbl-xbl.spamhaus.org;
http://w
On 05/27/2010 10:21 AM, Toby Corkindale wrote:
> On 27/05/10 18:06, atp wrote:
> As requested:
>
>
>
>> ifconfig br0 from the host
>>
> br0 Link encap:Ethernet HWaddr 00:1e:37:4d:8c:d8
> inet addr:192.168.1.206 Bcast:192.168.1.255 Mask:255.255.255.0
> inet
On 27/05/10 18:06, atp wrote:
As requested:
> ifconfig br0 from the host
br0 Link encap:Ethernet HWaddr 00:1e:37:4d:8c:d8
inet addr:192.168.1.206 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21e:37ff:fe4d:8cd8/64 Scope:Link
UP BROADCAST RUNNI
Hi,
Send
ifconfig br0from the host
ifconfig eth0 from the container
and the version of lxc you're using. Do you have anything special with
the /etc/sysctl.conf?
On a completely blank container with no tuning, I get with scp;
host->container squashfs.img 100% 639MB 33.6MB/s 0
