Aleksandr Konstantinov wrote:
as an alternative you might want to use LyX's internal math-limits
command, which is bound to "M-m l" for my installation. Just put the
cursor in front of the integral sign, press Meta-m l and see the limits
swap their position...
I feel stupid, I just
\sum \int \oint \prod \coprod
the following are in bigsize too: e.g. \bigoplus
\cap \cup \sqcup \vee \wedge \odot \otimes \oplus \uplus
for \sum and \prod there is a \nolimits, if you prefere
the limits as super/supscript.
Sorry, I wasn't clear . I mean, how can I put limits
"Stephen" == Stephen Patterson [EMAIL PROTECTED] writes:
Stephen How about a slight modification to LyX so that it will open
Stephen normal TeX files rather than reporting them as not being LyX
Stephen files.
Since importing of tex file is not perfect and will never be, it seems
to me that
"Matthew" == Matthew Lovell [EMAIL PROTECTED] writes:
Matthew Howdy, Don't know whether this one is already in the list...
Matthew It would be nice for LyX to support the short/long format for
Matthew captions (and perhaps for chapter/section/etc. names as well)
Matthew \caption[Short
Aleksandr Konstantinov wrote:
\sum \int \oint \prod \coprod
the following are in bigsize too: e.g. \bigoplus
\cap \cup \sqcup \vee \wedge \odot \otimes \oplus \uplus
for \sum and \prod there is a \nolimits, if you prefere
the limits as super/supscript.
Sorry, I wasn't clear .
Dear all,
Forgive me if either of my queries have been covered before.
I have trusted my PhD thesis to LyX which has coped admirably. I have a
couple of formatting issues that I'd like to solve but can't find answers
in the documentation (though that doesn't mean they're not there!).
D Milburn wrote:
Dear all,
Forgive me if either of my queries have been covered before.
I have trusted my PhD thesis to LyX which has coped admirably. I have a
couple of formatting issues that I'd like to solve but can't find answers
in the documentation (though that doesn't mean
Martijn Brouwer wrote:
I don't know whether LaTeX supports this, but I would like to have the
possibility to make a float having half the width of a page with the text
flowing around it. Often I have a quite large amount of graphs that show
just some measurement points and a fitted straight
Hi everyone,
I was just wondering if there is some converter/conversion mode to
upgrade LyX files from the 2.15 format from LyX 1.1.4 to version 2.16
used in LyX 1.1.5. Or is the conversion done automatically? It seems not
to be the case, as I am getting error messages by opening old files...
"Vincent" == Vincent VAQUIN [EMAIL PROTECTED] writes:
Vincent I have installed LyX.1.1.5 rpm and it works well. It's nice
Vincent because he is in my language (french). But there is a little
Vincent bug. When I choose an item on the help (aide in french) menu,
Vincent the matches are wrong : -
"jdd" == jdd [EMAIL PROTECTED] writes:
jdd very often, with any lyx version (included the last 1.1.5) and
jdd under kde, lyx don't start with "segmentation fault"
jdd when this appends, one needs to restart kde to fix the problem.
jdd However, I couldn't start lyx from a windows/vnc console.
Andre Poenitz wrote:
I've tried this (using LyX 1.1.5 under RH Linux 6.1) but when I type
\limits in math mode and hit the space key, I still see "limits". (This
Try typing \int\limits^12 _0
Andre'
It makes no difference!
Rick
Frank Mahler wrote:
Herbert Voss wrote about TeX's limits:
Try typing \int\limits^12 _0
uups, now i understand ... ;-)
i forgot to tell, that you first have to choose the
integral symbol from lyx or \int.
as an alternative you might want to use LyX's internal math-limits
Herbert Voss wrote:
"Richard A. Bilonick" wrote:
I've tried this (using LyX 1.1.5 under RH Linux 6.1) but when I type
\limits in math mode and hit the space key, I still see "limits". (This
that's ok. it's the same with other special math commands
which lyx does not show in wysiwig,
On Tue, 13 Jun 2000, Aleksandr Konstantinov wrote:
as an alternative you might want to use LyX's internal math-limits
command, which is bound to "M-m l" for my installation. Just put the
cursor in front of the integral sign, press Meta-m l and see the limits
swap their position...
I
Le mar, 13 jun 2000, Jean-Marc Lasgouttes a écrit :
"jdd" == jdd [EMAIL PROTECTED] writes:
jdd very often, with any lyx version (included the last 1.1.5) and
jdd under kde, lyx don't start with "segmentation fault"
dd and use the suse 6.4, a fairly recent kde...
Check that the glibc
Jean-Marc Lasgouttes wrote:
It is my pleasure to announce the release of LyX 1.1.5.
This version comes with a file README that has, as its first line,
"This is a LyX development release." This isn't correct, is it?
I'm using 1.1.4fix3 but it crashed when I tried to use the middle
mouse
I don't know whether LaTeX supports this, but I would like to have the
possibility to make a float having half the width of a page with the text
flowing around it. Often I have a quite large amount of graphs that show
just some measurement points and a fitted straight line. Having full width
Dear all,
Forgive me if either of my queries have been covered before.
I have trusted my PhD thesis to LyX which has coped admirably. I have a
couple of formatting issues that I'd like to solve but can't find answers
in the documentation (though that doesn't mean they're not there!).
I am
Aleksandr Konstantinov wrote:
as an alternative you might want to use LyX's internal math-limits
command, which is bound to "M-m l" for my installation. Just put the
cursor in front of the integral sign, press Meta-m l and see the limits
swap their position...
I feel stupid, I just
\sum \int \oint \prod \coprod
the following are in bigsize too: e.g. \bigoplus
\cap \cup \sqcup \vee \wedge \odot \otimes \oplus \uplus
for \sum and \prod there is a \nolimits, if you prefere
the limits as super/supscript.
Sorry, I wasn't clear . I mean, how can I put limits
"Stephen" == Stephen Patterson [EMAIL PROTECTED] writes:
Stephen How about a slight modification to LyX so that it will open
Stephen normal TeX files rather than reporting them as not being LyX
Stephen files.
Since importing of tex file is not perfect and will never be, it seems
to me that
"Matthew" == Matthew Lovell [EMAIL PROTECTED] writes:
Matthew Howdy, Don't know whether this one is already in the list...
Matthew It would be nice for LyX to support the short/long format for
Matthew captions (and perhaps for chapter/section/etc. names as well)
Matthew \caption[Short
Aleksandr Konstantinov wrote:
\sum \int \oint \prod \coprod
the following are in bigsize too: e.g. \bigoplus
\cap \cup \sqcup \vee \wedge \odot \otimes \oplus \uplus
for \sum and \prod there is a \nolimits, if you prefere
the limits as super/supscript.
Sorry, I wasn't clear .
Dear all,
Forgive me if either of my queries have been covered before.
I have trusted my PhD thesis to LyX which has coped admirably. I have a
couple of formatting issues that I'd like to solve but can't find answers
in the documentation (though that doesn't mean they're not there!).
D Milburn wrote:
Dear all,
Forgive me if either of my queries have been covered before.
I have trusted my PhD thesis to LyX which has coped admirably. I have a
couple of formatting issues that I'd like to solve but can't find answers
in the documentation (though that doesn't mean
Martijn Brouwer wrote:
I don't know whether LaTeX supports this, but I would like to have the
possibility to make a float having half the width of a page with the text
flowing around it. Often I have a quite large amount of graphs that show
just some measurement points and a fitted straight
Hi everyone,
I was just wondering if there is some converter/conversion mode to
upgrade LyX files from the 2.15 format from LyX 1.1.4 to version 2.16
used in LyX 1.1.5. Or is the conversion done automatically? It seems not
to be the case, as I am getting error messages by opening old files...
"Vincent" == Vincent VAQUIN [EMAIL PROTECTED] writes:
Vincent I have installed LyX.1.1.5 rpm and it works well. It's nice
Vincent because he is in my language (french). But there is a little
Vincent bug. When I choose an item on the help (aide in french) menu,
Vincent the matches are wrong : -
"jdd" == jdd [EMAIL PROTECTED] writes:
jdd very often, with any lyx version (included the last 1.1.5) and
jdd under kde, lyx don't start with "segmentation fault"
jdd when this appends, one needs to restart kde to fix the problem.
jdd However, I couldn't start lyx from a windows/vnc console.
Andre Poenitz wrote:
I've tried this (using LyX 1.1.5 under RH Linux 6.1) but when I type
\limits in math mode and hit the space key, I still see "limits". (This
Try typing \int\limits^12 _0
Andre'
It makes no difference!
Rick
Frank Mahler wrote:
Herbert Voss wrote about TeX's limits:
Try typing \int\limits^12 _0
uups, now i understand ... ;-)
i forgot to tell, that you first have to choose the
integral symbol from lyx or \int.
as an alternative you might want to use LyX's internal math-limits
Herbert Voss wrote:
"Richard A. Bilonick" wrote:
I've tried this (using LyX 1.1.5 under RH Linux 6.1) but when I type
\limits in math mode and hit the space key, I still see "limits". (This
that's ok. it's the same with other special math commands
which lyx does not show in wysiwig,
On Tue, 13 Jun 2000, Aleksandr Konstantinov wrote:
as an alternative you might want to use LyX's internal math-limits
command, which is bound to "M-m l" for my installation. Just put the
cursor in front of the integral sign, press Meta-m l and see the limits
swap their position...
I
Le mar, 13 jun 2000, Jean-Marc Lasgouttes a écrit :
"jdd" == jdd [EMAIL PROTECTED] writes:
jdd very often, with any lyx version (included the last 1.1.5) and
jdd under kde, lyx don't start with "segmentation fault"
dd and use the suse 6.4, a fairly recent kde...
Check that the glibc
Jean-Marc Lasgouttes wrote:
It is my pleasure to announce the release of LyX 1.1.5.
This version comes with a file README that has, as its first line,
"This is a LyX development release." This isn't correct, is it?
I'm using 1.1.4fix3 but it crashed when I tried to use the middle
mouse
I don't know whether LaTeX supports this, but I would like to have the
possibility to make a float having half the width of a page with the text
flowing around it. Often I have a quite large amount of graphs that show
just some measurement points and a fitted straight line. Having full width
Dear all,
Forgive me if either of my queries have been covered before.
I have trusted my PhD thesis to LyX which has coped admirably. I have a
couple of formatting issues that I'd like to solve but can't find answers
in the documentation (though that doesn't mean they're not there!).
I am
Aleksandr Konstantinov wrote:
>
> > as an alternative you might want to use LyX's internal math-limits
> > command, which is bound to "M-m l" for my installation. Just put the
> > cursor in front of the integral sign, press Meta-m l and see the limits
> > swap their position...
>
> I feel
> \sum \int \oint \prod \coprod
>
> the following are in bigsize too: e.g. \bigoplus
> \cap \cup \sqcup \vee \wedge \odot \otimes \oplus \uplus
>
> for \sum and \prod there is a \nolimits, if you prefere
> the limits as super/supscript.
>
Sorry, I wasn't clear . I mean, how can I put limits
> "Stephen" == Stephen Patterson <[EMAIL PROTECTED]> writes:
Stephen> How about a slight modification to LyX so that it will open
Stephen> normal TeX files rather than reporting them as not being LyX
Stephen> files.
Since importing of tex file is not perfect and will never be, it seems
to
> "Matthew" == Matthew Lovell <[EMAIL PROTECTED]> writes:
Matthew> Howdy, Don't know whether this one is already in the list...
Matthew> It would be nice for LyX to support the short/long format for
Matthew> captions (and perhaps for chapter/section/etc. names as well)
Matthew>
Aleksandr Konstantinov wrote:
>
> > \sum \int \oint \prod \coprod
> >
> > the following are in bigsize too: e.g. \bigoplus
> > \cap \cup \sqcup \vee \wedge \odot \otimes \oplus \uplus
> >
> > for \sum and \prod there is a \nolimits, if you prefere
> > the limits as super/supscript.
> >
>
> Dear all,
>
> Forgive me if either of my queries have been covered before.
>
> I have trusted my PhD thesis to LyX which has coped admirably. I have a
> couple of formatting issues that I'd like to solve but can't find answers
> in the documentation (though that doesn't mean they're not
D Milburn wrote:
>
> Dear all,
>
> Forgive me if either of my queries have been covered before.
>
> I have trusted my PhD thesis to LyX which has coped admirably. I have a
> couple of formatting issues that I'd like to solve but can't find answers
> in the documentation (though that doesn't
Martijn Brouwer wrote:
>
> I don't know whether LaTeX supports this, but I would like to have the
> possibility to make a float having half the width of a page with the text
> flowing around it. Often I have a quite large amount of graphs that show
> just some measurement points and a fitted
Hi everyone,
I was just wondering if there is some converter/conversion mode to
upgrade LyX files from the 2.15 format from LyX 1.1.4 to version 2.16
used in LyX 1.1.5. Or is the conversion done automatically? It seems not
to be the case, as I am getting error messages by opening old files...
> "Vincent" == Vincent VAQUIN <[EMAIL PROTECTED]> writes:
Vincent> I have installed LyX.1.1.5 rpm and it works well. It's nice
Vincent> because he is in my language (french). But there is a little
Vincent> bug. When I choose an item on the help (aide in french) menu,
Vincent> the matches are
> "jdd" == jdd <[EMAIL PROTECTED]> writes:
jdd> very often, with any lyx version (included the last 1.1.5) and
jdd> under kde, lyx don't start with "segmentation fault"
jdd> when this appends, one needs to restart kde to fix the problem.
jdd> However, I couldn't start lyx from a
Andre Poenitz wrote:
> > I've tried this (using LyX 1.1.5 under RH Linux 6.1) but when I type
> > \limits in math mode and hit the space key, I still see "limits". (This
>
> Try typing \int\limits^12 _0
>
> Andre'
It makes no difference!
Rick
Frank Mahler wrote:
> Herbert Voss wrote about TeX's limits:
> > > Try typing \int\limits^12 _0
> >
> > uups, now i understand ... ;-)
> >
> > i forgot to tell, that you first have to choose the
> > integral symbol from lyx or \int.
> as an alternative you might want to use LyX's internal
Herbert Voss wrote:
> "Richard A. Bilonick" wrote:
> >
> > I've tried this (using LyX 1.1.5 under RH Linux 6.1) but when I type
> > \limits in math mode and hit the space key, I still see "limits". (This
>
> that's ok. it's the same with other special math commands
> which lyx does not show in
On Tue, 13 Jun 2000, Aleksandr Konstantinov wrote:
> > as an alternative you might want to use LyX's internal math-limits
> > command, which is bound to "M-m l" for my installation. Just put the
> > cursor in front of the integral sign, press Meta-m l and see the limits
> > swap their
Le mar, 13 jun 2000, Jean-Marc Lasgouttes a écrit :
> > "jdd" == jdd <[EMAIL PROTECTED]> writes:
>
> jdd> very often, with any lyx version (included the last 1.1.5) and
> jdd> under kde, lyx don't start with "segmentation fault"
dd> and use the suse 6.4, a fairly recent kde...
>
> Check
Jean-Marc Lasgouttes wrote:
> It is my pleasure to announce the release of LyX 1.1.5.
This version comes with a file README that has, as its first line,
"This is a LyX development release." This isn't correct, is it?
I'm using 1.1.4fix3 but it crashed when I tried to use the middle
mouse
I don't know whether LaTeX supports this, but I would like to have the
possibility to make a float having half the width of a page with the text
flowing around it. Often I have a quite large amount of graphs that show
just some measurement points and a fitted straight line. Having full width
Dear all,
Forgive me if either of my queries have been covered before.
I have trusted my PhD thesis to LyX which has coped admirably. I have a
couple of formatting issues that I'd like to solve but can't find answers
in the documentation (though that doesn't mean they're not there!).
I am
57 matches
Mail list logo
