Re: Changing case of word

Micha Feigin wrote: Is it possible in latex to automatically change the case of a word (capitalize all/first letter)? \MakeUppercase{upcase all letters} \MakeLowercase{LoWcAse aLl LeTters} AFAIK there's no command to capitalize just the first letter, but you will surely find some workarounds

Re: NatBib problem: one author with more than one publication in the same year == Error message

Janus Sandsgaard wrote: Sandsgaard, Janus (2004a) Sandsgaard, Janus (2004b) (this is what apalike does). But instead I get an error message: Misplaced alignment tab character . e=ukcategory=11} I have no such problem with plainnat. I have tried building my own .bst for

Problem:insertinclude file - cross reference

I edited a small book recently which had cross references to labelled sections in each chapter. The chapters were written as individual lyx files and then included in a master document. However, it seems all the crossreferences pointed to the same section - which incidentally was not correct

Windows: lyx configure says latex is unuseable (during configure)

I've run into a weird problem. Until recently LyX was running fine on my computer. However, now all the output types (PS, PDF, etc.) have disappeared from the menus. I don't know what happened. I ran reconfigure and from the output I see that the problem is that when searching for latex,

Re: Windows: lyx configure says latex is unuseable (during configure)

Omair-Inam Abdul-Matin wrote: I've run into a weird problem. Until recently LyX was running fine on my computer. However, now all the output types (PS, PDF, etc.) have disappeared from the menus. I don't know what happened. I ran reconfigure and from the output I see that the problem is

Re: non-english(hebrew) text inside ert

Micha Feigin wrote: Is it possible to insert non-english (hebrew in my case) text inside and ert? Have you tried quiting the ERT in the middle, writing Hebrew and then opening another ERT? The only thing to note is the order of the two ERTs (in an RTL paragraph): The first one (e.g begin{...

Re: non-english(hebrew) text inside ert

Sorry, here is the message with the attachment. Micha Feigin wrote: Is it possible to insert non-english (hebrew in my case) text inside and ert? Have you tried quiting the ERT in the middle, writing Hebrew and then opening another ERT? The only thing to note is the order of the two ERTs (in

Re: Changing case of word

- Original Message - From: Micha Feigin michf-+lLcF8/[EMAIL PROTECTED] Newsgroups: gmane.editors.lyx.general Sent: Wednesday, June 22, 2005 12:49 PM Subject: Changing case of word Is it possible in latex to automatically change the case of a word (capitalize all/first letter)?

Re: LyXWin not working on XP

Paul A. Rubin wrote: Rob S wrote: More info please! subst?? subst (short for substitute) is an old DOS command that is still supported Thanks for following up on this for me, Paul. I've been travelling and have fallen behind on my personal email. One additional note: if you open a

more hyperref

Many thanks for all the useful comments yesterday about the hyperref package. I now have it working. However it only links the number such that figure 1 has a link for the 1 not the whole 'figure 1'. Is there any way to link the whole thing? Also the backref links from the bibliography only

Re: Problems with .ps and .dvi output when .eps is embedded

Geoffrey Lloyd wrote: I have not been following this thread but have just read the background stuff. I then downloaded the file which seems to actually be a .ps rather than .eps file but no matter. Using ghostscript to convert to .eps I reproduce the same problems experienced. But if I

Re: Changing case of word

Micha Feigin wrote: Is it possible in latex to automatically change the case of a word (capitalize all/first letter)? \MakeUppercase{upcase all letters} \MakeLowercase{LoWcAse aLl LeTters} AFAIK there's no command to capitalize just the first letter, but you will surely find some workarounds

Re: NatBib problem: one author with more than one publication in the same year == Error message

Janus Sandsgaard wrote: Sandsgaard, Janus (2004a) Sandsgaard, Janus (2004b) (this is what apalike does). But instead I get an error message: Misplaced alignment tab character . e=ukcategory=11} I have no such problem with plainnat. I have tried building my own .bst for

Problem:insertinclude file - cross reference

I edited a small book recently which had cross references to labelled sections in each chapter. The chapters were written as individual lyx files and then included in a master document. However, it seems all the crossreferences pointed to the same section - which incidentally was not correct

Windows: lyx configure says latex is unuseable (during configure)

I've run into a weird problem. Until recently LyX was running fine on my computer. However, now all the output types (PS, PDF, etc.) have disappeared from the menus. I don't know what happened. I ran reconfigure and from the output I see that the problem is that when searching for latex,

Re: Windows: lyx configure says latex is unuseable (during configure)

Omair-Inam Abdul-Matin wrote: I've run into a weird problem. Until recently LyX was running fine on my computer. However, now all the output types (PS, PDF, etc.) have disappeared from the menus. I don't know what happened. I ran reconfigure and from the output I see that the problem is

Re: non-english(hebrew) text inside ert

Micha Feigin wrote: Is it possible to insert non-english (hebrew in my case) text inside and ert? Have you tried quiting the ERT in the middle, writing Hebrew and then opening another ERT? The only thing to note is the order of the two ERTs (in an RTL paragraph): The first one (e.g begin{...

Re: non-english(hebrew) text inside ert

Sorry, here is the message with the attachment. Micha Feigin wrote: Is it possible to insert non-english (hebrew in my case) text inside and ert? Have you tried quiting the ERT in the middle, writing Hebrew and then opening another ERT? The only thing to note is the order of the two ERTs (in

Re: Changing case of word

- Original Message - From: Micha Feigin michf-+lLcF8/[EMAIL PROTECTED] Newsgroups: gmane.editors.lyx.general Sent: Wednesday, June 22, 2005 12:49 PM Subject: Changing case of word Is it possible in latex to automatically change the case of a word (capitalize all/first letter)?

Re: LyXWin not working on XP

Paul A. Rubin wrote: Rob S wrote: More info please! subst?? subst (short for substitute) is an old DOS command that is still supported Thanks for following up on this for me, Paul. I've been travelling and have fallen behind on my personal email. One additional note: if you open a

more hyperref

Many thanks for all the useful comments yesterday about the hyperref package. I now have it working. However it only links the number such that figure 1 has a link for the 1 not the whole 'figure 1'. Is there any way to link the whole thing? Also the backref links from the bibliography only

Re: Problems with .ps and .dvi output when .eps is embedded

Geoffrey Lloyd wrote: I have not been following this thread but have just read the background stuff. I then downloaded the file which seems to actually be a .ps rather than .eps file but no matter. Using ghostscript to convert to .eps I reproduce the same problems experienced. But if I

Re: Changing case of word

Micha Feigin wrote: > Is it possible in latex to automatically change the case of a word > (capitalize all/first letter)? \MakeUppercase{upcase all letters} \MakeLowercase{LoWcAse aLl LeTters} AFAIK there's no command to capitalize just the first letter, but you will surely find some

Re: NatBib problem: one author with more than one publication in the same year ==> Error message

Janus Sandsgaard wrote: > Sandsgaard, Janus (2004a) > Sandsgaard, Janus (2004b) > > (this is what apalike does). But instead I get an error message: > > "Misplaced alignment tab character &. > e=uk=11} I have no such problem with plainnat. > I have tried building my own .bst for

Problem:insert>include file - cross reference

I edited a small book recently which had cross references to labelled sections in each chapter. The chapters were written as individual lyx files and then included in a master document. However, it seems all the crossreferences pointed to the same section - which incidentally was not correct

Windows: lyx configure says latex is unuseable (during configure)

I've run into a weird problem. Until recently LyX was running fine on my computer. However, now all the output types (PS, PDF, etc.) have disappeared from the menus. I don't know what happened. I ran reconfigure and from the output I see that the problem is that when searching for latex,

Re: Windows: lyx configure says latex is unuseable (during configure)

Omair-Inam Abdul-Matin wrote: I've run into a weird problem. Until recently LyX was running fine on my computer. However, now all the output types (PS, PDF, etc.) have disappeared from the menus. I don't know what happened. I ran reconfigure and from the output I see that the problem is

Re: non-english(hebrew) text inside ert

Micha Feigin wrote: Is it possible to insert non-english (hebrew in my case) text inside and ert? Have you tried quiting the ERT in the middle, writing Hebrew and then opening another ERT? The only thing to note is the order of the two ERTs (in an RTL paragraph): The first one (e.g begin{...

Re: non-english(hebrew) text inside ert

Sorry, here is the message with the attachment. Micha Feigin wrote: Is it possible to insert non-english (hebrew in my case) text inside and ert? Have you tried quiting the ERT in the middle, writing Hebrew and then opening another ERT? The only thing to note is the order of the two ERTs (in

Re: Changing case of word

- Original Message - From: "Micha Feigin" Newsgroups: gmane.editors.lyx.general Sent: Wednesday, June 22, 2005 12:49 PM Subject: Changing case of word Is it possible in latex to automatically change the case of a word (capitalize all/first letter)?

Re: LyXWin not working on XP

Paul A. Rubin wrote: Rob S wrote: More info please! subst?? subst (short for "substitute") is an old DOS command that is still supported Thanks for following up on this for me, Paul. I've been travelling and have fallen behind on my personal email. One additional note: if you open

more hyperref

Many thanks for all the useful comments yesterday about the hyperref package. I now have it working. However it only links the number such that figure 1 has a link for the 1 not the whole 'figure 1'. Is there any way to link the whole thing? Also the backref links from the bibliography only

Re: Problems with .ps and .dvi output when .eps is embedded

Geoffrey Lloyd wrote: > I have not been following this thread but have just read the background > stuff. I then downloaded the file which seems to actually be a .ps > rather than .eps file but no matter. Using ghostscript to convert to > .eps I reproduce the same problems experienced. > > But if