Julio Rojas schrieb:
Same problem here using the alternate installer. While rendering PDF's using
any method (translation from error in spanish):
*The folder
c:/Users/myuser/AppData/Local/Temp/lyx_tmpdir5056a...\lyx_tmpbuf0\ doesn't
exist. May have been moved or deleted. Wish to create it?
I tried the official installer but I got the same problems and more. It
will not launch the Acrobat program to show the pdf file when I
selection View-PDF (PDFLATEX).
If I open the file manually, the update will fail because LyX cannot
write to the file that is open.
No, I am not using
Thank you very much for your answer. FYI, I'm using Vista 32bit version.
Before I start, I need to know if pdf updating works four you when you
install LyX using the
standard installer.
I have never used the standard installer, so I can't answer your question.
On Feb 9, 2008 2:07 PM, Uwe
It seems there's a problem in the path to the default PDF viewer. If I added
the full path to Acrobat Reader in the file format configuration as follows:
c:\PROGRA~1\Adobe\READER~1.0\Reader\acrord32.exe
after rendering the PDF, the reader is run but gets hung with about 49% of
the processor
Following what was said on:
http://www.mail-archive.com/lyx-users@lists.lyx.org/msg57937.html
I decided to use pdfview.exe instead of pdfviewwin.exe. It works fine,
but there's the nagging problem of UAC always asking me for confirmation to
run pdfview.exe, as it is not registered.
At least, now
Another solution, installing Sumatra (
http://blog.kowalczyk.info/software/sumatrapdf/) which is WAY smaller and
adding the path:
C:\PROGRA~1\SUMATR~1\SUMATR~1.EXE
to the viewer field.
On Feb 9, 2008 5:46 PM, Julio Rojas [EMAIL PROTECTED] wrote:
Following what was said on:
Max Bian wrote:
I am using 1.53 on Windows Vista. I found pdflatex easiest to get what I
need. However I have two problems with it:
1. When I do view-PDF(PDFLATEX), it will ask me if I want to create the
directory for the output files. Is there a way to remove this
unnecessary user input?
I tried both installer and updated the Acrobat.
With the official installer, problem #1 is fixed. I still have problem
with #2. LyX error: I cannot write on file xxx.pdf.
Max
Joost Verburg wrote:
Max Bian wrote:
I am using 1.53 on Windows Vista. I found pdflatex easiest to get
what I need.
Max Bian schrieb:
1. When I do view->PDF(PDFLATEX), it will ask me if I want to create the
directory for the output files. Is there a way to remove this
unnecessary user input?
2. If the pdf is open in Acrobat, the update would fail. Is there a way
to avoid this?
Both should not occur.
I used the alternative installer. Was that the difference?
Thanks.
Max
Uwe Stöhr wrote:
Max Bian schrieb:
1. When I do view->PDF(PDFLATEX), it will ask me if I want to create
the directory for the output files. Is there a way to remove this
unnecessary user input?
2. If the pdf is open
Same problem here using the alternate installer. While rendering PDF's using
any method (translation from error in spanish):
*The folder
c:/Users/myuser/AppData/Local/Temp/lyx_tmpdir5056a...\lyx_tmpbuf0\ doesn't
exist. May have been moved or deleted. Wish to create it?
*
If you answer "yes"
The folders do exist and both, the temporal files and the PDF are inside.
Maybe the problem is path related.
On Feb 9, 2008 12:57 PM, Julio Rojas <[EMAIL PROTECTED]> wrote:
> Same problem here using the alternate installer. While rendering PDF's
> using any method (translation from error in
Max Bian schrieb:
I used the alternative installer. Was that the difference?
I'm the author of this installer ;-)
Just joking, here's the difference:
http://wiki.lyx.org/Windows/LyXWinInstaller
It should work on Vista as well. On Vista 64bit editions there are problems
with this:
2. If the
Julio Rojas schrieb:
Same problem here using the alternate installer. While rendering PDF's using
any method (translation from error in spanish):
*The folder
c:/Users/myuser/AppData/Local/Temp/lyx_tmpdir5056a...\lyx_tmpbuf0\ doesn't
exist. May have been moved or deleted. Wish to create it?
I tried the official installer but I got the same problems and more. It
will not launch the Acrobat program to show the pdf file when I
selection View->PDF (PDFLATEX).
If I open the file manually, the update will fail because LyX cannot
write to the file that is open.
No, I am not using
Thank you very much for your answer. FYI, I'm using Vista 32bit version.
Before I start, I need to know if pdf updating works four you when you
> install LyX using the
> standard installer.
>
I have never used the standard installer, so I can't answer your question.
On Feb 9, 2008 2:07 PM, Uwe
It seems there's a problem in the path to the default PDF viewer. If I added
the full path to Acrobat Reader in the file format configuration as follows:
c:\PROGRA~1\Adobe\READER~1.0\Reader\acrord32.exe
after rendering the PDF, the reader is run but gets hung with about 49% of
the processor
Following what was said on:
http://www.mail-archive.com/lyx-users@lists.lyx.org/msg57937.html
I decided to use "pdfview.exe" instead of "pdfviewwin.exe". It works fine,
but there's the nagging problem of UAC always asking me for confirmation to
run pdfview.exe, as it is not registered.
At least,
Another solution, installing Sumatra (
http://blog.kowalczyk.info/software/sumatrapdf/) which is WAY smaller and
adding the path:
C:\PROGRA~1\SUMATR~1\SUMATR~1.EXE
to the viewer field.
On Feb 9, 2008 5:46 PM, Julio Rojas <[EMAIL PROTECTED]> wrote:
> Following what was said on:
>
Max Bian wrote:
I am using 1.53 on Windows Vista. I found pdflatex easiest to get what I
need. However I have two problems with it:
1. When I do view->PDF(PDFLATEX), it will ask me if I want to create the
directory for the output files. Is there a way to remove this
unnecessary user input?
I tried both installer and updated the Acrobat.
With the official installer, problem #1 is fixed. I still have problem
with #2. LyX error: I cannot write on file xxx.pdf.
Max
Joost Verburg wrote:
Max Bian wrote:
I am using 1.53 on Windows Vista. I found pdflatex easiest to get
what I need.
I am using 1.53 on Windows Vista. I found pdflatex easiest to get what I
need. However I have two problems with it:
1. When I do view-PDF(PDFLATEX), it will ask me if I want to create the
directory for the output files. Is there a way to remove this
unnecessary user input?
2. If the pdf is
I am using 1.53 on Windows Vista. I found pdflatex easiest to get what I
need. However I have two problems with it:
1. When I do view-PDF(PDFLATEX), it will ask me if I want to create the
directory for the output files. Is there a way to remove this
unnecessary user input?
2. If the pdf is
I am using 1.53 on Windows Vista. I found pdflatex easiest to get what I
need. However I have two problems with it:
1. When I do view->PDF(PDFLATEX), it will ask me if I want to create the
directory for the output files. Is there a way to remove this
unnecessary user input?
2. If the pdf is
I just installed lyx on a windows xp system (sp2). After the installation
(which included MikTeX, ghostscript, imagemagick) and after opening files
(i. e. from the docs) error messages appear telling me that layout-files are
missing (scrbook.layout). Is this a known bug? Was it my mistake
Uwe Stöhr wrote:
When you install LyX using this installer:
http://wiki.lyx.org/Windows/LyXWinInstaller
all LaTeX-packages needed by LyX are automatically installed. All you
need to do, is to have an open internet connection before you start to
install LyX.
The standard installer does the
I just installed lyx on a windows xp system (sp2). After the installation
(which included MikTeX, ghostscript, imagemagick) and after opening files
(i. e. from the docs) error messages appear telling me that layout-files are
missing (scrbook.layout). Is this a known bug? Was it my mistake
Uwe Stöhr wrote:
When you install LyX using this installer:
http://wiki.lyx.org/Windows/LyXWinInstaller
all LaTeX-packages needed by LyX are automatically installed. All you
need to do, is to have an open internet connection before you start to
install LyX.
The standard installer does the
> I just installed lyx on a windows xp system (sp2). After the installation
> (which included MikTeX, ghostscript, imagemagick) and after opening files
> (i. e. from the docs) error messages appear telling me that layout-files are
> missing (scrbook.layout). Is this a known bug? Was i
Uwe Stöhr wrote:
When you install LyX using this installer:
http://wiki.lyx.org/Windows/LyXWinInstaller
all LaTeX-packages needed by LyX are automatically installed. All you
need to do, is to have an open internet connection before you start to
install LyX.
The standard installer does the
Peter Jahn wrote:
Hi lyx user group,
I just installed lyx on a windows xp system (sp2). After the installation
(which included MikTeX, ghostscript, imagemagick) and after opening files
(i. e. from the docs) error messages appear telling me that layout-files are
missing (scrbook.layout
Hi lyx user group,
I just installed lyx on a windows xp system (sp2). After the installation
(which included MikTeX, ghostscript, imagemagick) and after opening files
(i. e. from the docs) error messages appear telling me that layout-files are
missing (scrbook.layout). Is this a known bug
Peter Jahn schrieb:
I just installed lyx on a windows xp system (sp2). After the installation
(which included MikTeX, ghostscript, imagemagick) and after opening files
(i. e. from the docs) error messages appear telling me that layout-files are
missing (scrbook.layout). Is this a known bug
Peter Jahn wrote:
Hi lyx user group,
I just installed lyx on a windows xp system (sp2). After the installation
(which included MikTeX, ghostscript, imagemagick) and after opening files
(i. e. from the docs) error messages appear telling me that layout-files are
missing (scrbook.layout
Hi lyx user group,
I just installed lyx on a windows xp system (sp2). After the installation
(which included MikTeX, ghostscript, imagemagick) and after opening files
(i. e. from the docs) error messages appear telling me that layout-files are
missing (scrbook.layout). Is this a known bug
Peter Jahn schrieb:
I just installed lyx on a windows xp system (sp2). After the installation
(which included MikTeX, ghostscript, imagemagick) and after opening files
(i. e. from the docs) error messages appear telling me that layout-files are
missing (scrbook.layout). Is this a known bug
Peter Jahn wrote:
Hi lyx user group,
I just installed lyx on a windows xp system (sp2). After the installation
(which included MikTeX, ghostscript, imagemagick) and after opening files
(i. e. from the docs) error messages appear telling me that layout-files are
missing (scrbook.layout
Hi lyx user group,
I just installed lyx on a windows xp system (sp2). After the installation
(which included MikTeX, ghostscript, imagemagick) and after opening files
(i. e. from the docs) error messages appear telling me that layout-files are
missing (scrbook.layout). Is this a known bug
Peter Jahn schrieb:
I just installed lyx on a windows xp system (sp2). After the installation
(which included MikTeX, ghostscript, imagemagick) and after opening files
(i. e. from the docs) error messages appear telling me that layout-files are
missing (scrbook.layout). Is this a known bug
I'm very new to both lyx and latex, and am trying to get my lyx key bindings
to work in the style of emacs. I'm having difficulty getting the mark to
work. I have the following line in my binding file:
\bind C-spacemark-on
The behavior I am expect is to press C-space, and then have
Paul and JoAnna Novonaar wrote:
Is mark-on implemented in Windows?
The feature is broken in general currently:
http://bugzilla.lyx.org/show_bug.cgi?id=2913
Jürgen
I'm very new to both lyx and latex, and am trying to get my lyx key bindings
to work in the style of emacs. I'm having difficulty getting the mark to
work. I have the following line in my binding file:
\bind C-spacemark-on
The behavior I am expect is to press C-space, and then have
Paul and JoAnna Novonaar wrote:
Is mark-on implemented in Windows?
The feature is broken in general currently:
http://bugzilla.lyx.org/show_bug.cgi?id=2913
Jürgen
I'm very new to both lyx and latex, and am trying to get my lyx key bindings
to work in the style of emacs. I'm having difficulty getting the mark to
work. I have the following line in my binding file:
\bind "C-space""mark-on"
The behavior I am expect is to press C-space, and then
Paul and JoAnna Novonaar wrote:
> Is mark-on implemented in Windows?
The feature is broken in general currently:
http://bugzilla.lyx.org/show_bug.cgi?id=2913
Jürgen
Hello,
When a type a inline math formula followed by a comma, and, after a pass
the cursor on it (using the right arrow key) lyx generates an fatal error.
Is this issue correct in newer versions
Best regards
Valter
--
-
PLEASE
Valter Filipe Silva wrote:
When a type a inline math formula followed by a comma, and, after a pass
the cursor on it (using the right arrow key) lyx generates an fatal error.
You mean it crashes?
Is this issue correct in newer versions
If I understood you correctly, then I think it is fixed.
Hello,
I install Lyx RC2 but when i try to open my document it crash ! I'm back
to Beta3.
Best regards
VFS
Valter Filipe Silva wrote:
Hello,
When a type a inline math formula followed by a comma, and, after a
pass the cursor on it (using the right arrow key) lyx generates an
Valter Filipe Silva wrote:
I install Lyx RC2 but when i try to open my document it crash !
could you produce a test case?
Jürgen
Hello,
When a type a inline math formula followed by a comma, and, after a pass
the cursor on it (using the right arrow key) lyx generates an fatal error.
Is this issue correct in newer versions
Best regards
Valter
--
-
PLEASE
Valter Filipe Silva wrote:
When a type a inline math formula followed by a comma, and, after a pass
the cursor on it (using the right arrow key) lyx generates an fatal error.
You mean it crashes?
Is this issue correct in newer versions
If I understood you correctly, then I think it is fixed.
Hello,
I install Lyx RC2 but when i try to open my document it crash ! I'm back
to Beta3.
Best regards
VFS
Valter Filipe Silva wrote:
Hello,
When a type a inline math formula followed by a comma, and, after a
pass the cursor on it (using the right arrow key) lyx generates an
Valter Filipe Silva wrote:
I install Lyx RC2 but when i try to open my document it crash !
could you produce a test case?
Jürgen
Hello,
When a type a inline math formula followed by a comma, and, after a pass
the cursor on it (using the right arrow key) lyx generates an fatal error.
Is this issue correct in newer versions
Best regards
Valter
--
-
PLEASE
Valter Filipe Silva wrote:
> When a type a inline math formula followed by a comma, and, after a pass
> the cursor on it (using the right arrow key) lyx generates an fatal error.
You mean it crashes?
> Is this issue correct in newer versions
If I understood you correctly, then I think it is
Hello,
I install Lyx RC2 but when i try to open my document it crash ! I'm back
to Beta3.
Best regards
VFS
Valter Filipe Silva wrote:
Hello,
When a type a inline math formula followed by a comma, and, after a
pass the cursor on it (using the right arrow key) lyx generates an
Valter Filipe Silva wrote:
> I install Lyx RC2 but when i try to open my document it crash !
could you produce a test case?
Jürgen
Uwe Stöhr schrieb:
Georg Brandl schrieb:
FYI, I now solved the problem.
I had even built an installer and it wouldn't run from a fresh install with
it.
The problem was that in the Microsoft.VC80.CRT.manifest file, there is a
line
noInheritable/
which should be
noInherit/
With that
Georg Brandl schrieb:
The version number is a bit older while the manifest in LyX's SVN is
version=8.0.50727.762
So when you are using an older DLL version than this, it will fail. Ideally the
version of the DLLs
and the one in the manifest should be identic. I can do this for SVN, but
before
Uwe Stöhr schrieb:
Georg Brandl schrieb:
FYI, I now solved the problem.
I had even built an installer and it wouldn't run from a fresh install with
it.
The problem was that in the Microsoft.VC80.CRT.manifest file, there is a
line
noInheritable/
which should be
noInherit/
With that
Georg Brandl schrieb:
The version number is a bit older while the manifest in LyX's SVN is
version=8.0.50727.762
So when you are using an older DLL version than this, it will fail. Ideally the
version of the DLLs
and the one in the manifest should be identic. I can do this for SVN, but
before
Uwe Stöhr schrieb:
Georg Brandl schrieb:
FYI, I now solved the problem.
I had even built an installer and it wouldn't run from a fresh install with
it.
The problem was that in the Microsoft.VC80.CRT.manifest file, there is a
line
which should be
With that change, it runs fine.
This
Georg Brandl schrieb:
The version number is a bit older while the manifest in LyX's SVN is
version="8.0.50727.762"
So when you are using an older DLL version than this, it will fail. Ideally the
version of the DLLs
and the one in the manifest should be identic. I can do this for SVN, but
hzluo schrieb:
I got the SVN to compile fine with the instructions, but after
copying the .exe
over lyxc.exe of a completed 1.4.4 install, a dialog appears
Runtime Error R6034,
An application has made an attempt to load the C runtime library
incorrectly.
Please contact the application's support
Georg Brandl schrieb:
FYI, I now solved the problem.
I had even built an installer and it wouldn't run from a fresh install with
it.
The problem was that in the Microsoft.VC80.CRT.manifest file, there is a
line
noInheritable/
which should be
noInherit/
With that change, it
Georg Brandl schrieb:
FYI, I now solved the problem.
I had even built an installer and it wouldn't run from a fresh install with
it.
The problem was that in the Microsoft.VC80.CRT.manifest file, there is a
line
noInheritable/
which should be
noInherit/
With that change, it runs fine.
hzluo schrieb:
I got the SVN to compile fine with the instructions, but after
copying the .exe
over lyxc.exe of a completed 1.4.4 install, a dialog appears
Runtime Error R6034,
An application has made an attempt to load the C runtime library
incorrectly.
Please contact the application's support
Georg Brandl schrieb:
FYI, I now solved the problem.
I had even built an installer and it wouldn't run from a fresh install with
it.
The problem was that in the Microsoft.VC80.CRT.manifest file, there is a
line
noInheritable/
which should be
noInherit/
With that change, it
Georg Brandl schrieb:
FYI, I now solved the problem.
I had even built an installer and it wouldn't run from a fresh install with
it.
The problem was that in the Microsoft.VC80.CRT.manifest file, there is a
line
noInheritable/
which should be
noInherit/
With that change, it runs fine.
hzluo schrieb:
>>>I got the SVN to compile fine with the instructions, but after
>>>copying the .exe
>>>over lyxc.exe of a completed 1.4.4 install, a dialog appears
>>>
>>>"Runtime Error R6034,
>>>An application has made an attempt to load the C runtime library
>>>incorrectly.
>>>Please contact
Georg Brandl schrieb:
> FYI, I now solved the problem.
>
> I had even built an installer and it wouldn't run from a fresh install with
> it.
>
> The problem was that in the Microsoft.VC80.CRT.manifest file, there is a
> line
>
>
>
> which should be
>
>
>
> With that change, it runs
Georg Brandl schrieb:
FYI, I now solved the problem.
I had even built an installer and it wouldn't run from a fresh install with
it.
The problem was that in the Microsoft.VC80.CRT.manifest file, there is a
line
which should be
With that change, it runs fine.
This is no solution
Uwe Stöhr schrieb:
Georg Brandl schrieb:
I have to make some modifications to the LyX source, so I have
to build it afresh on Windows.
What is the recommended way for doing that nowadays?
http://www.lyx.org/trac/browser/lyx-devel/trunk/INSTALL.Win32
regards Uwe
Thanks!
Georg
On Wed, 13 Jun 2007, Georg Brandl wrote:
I have to make some modifications to the LyX source, so I have to
build it afresh on Windows.
What is the recommended way for doing that nowadays?
http://www.lyx.org/trac/browser/lyx-devel/trunk/INSTALL.Win32
In case the instructions are incorrect
Georg Brandl wrote:
Hi,
I have to make some modifications to the LyX source, so I have
to build it afresh on Windows.
What do you want to change?
If you are planning an improvement, please consider
getting it into LyX for the benefit of all. :-)
Helge Hafting
[EMAIL PROTECTED] schrieb:
On Wed, 13 Jun 2007, Georg Brandl wrote:
I have to make some modifications to the LyX source, so I have to
build it afresh on Windows.
What is the recommended way for doing that nowadays?
http://www.lyx.org/trac/browser/lyx-devel/trunk/INSTALL.Win32
In case
Georg Brandl schrieb:
I got the SVN to compile fine with the instructions, but after copying the .exe
over lyxc.exe of a completed 1.4.4 install, a dialog appears
Runtime Error R6034,
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's
Uwe Stöhr schrieb:
Georg Brandl schrieb:
I got the SVN to compile fine with the instructions, but after copying the
.exe
over lyxc.exe of a completed 1.4.4 install, a dialog appears
Runtime Error R6034,
An application has made an attempt to load the C runtime library incorrectly.
I got the SVN to compile fine with the instructions, but after
copying the .exe
over lyxc.exe of a completed 1.4.4 install, a dialog appears
Runtime Error R6034,
An application has made an attempt to load the C runtime library
incorrectly.
Please contact the application's support team for more
Uwe Stöhr schrieb:
Georg Brandl schrieb:
I have to make some modifications to the LyX source, so I have
to build it afresh on Windows.
What is the recommended way for doing that nowadays?
http://www.lyx.org/trac/browser/lyx-devel/trunk/INSTALL.Win32
regards Uwe
Thanks!
Georg
On Wed, 13 Jun 2007, Georg Brandl wrote:
I have to make some modifications to the LyX source, so I have to
build it afresh on Windows.
What is the recommended way for doing that nowadays?
http://www.lyx.org/trac/browser/lyx-devel/trunk/INSTALL.Win32
In case the instructions are incorrect
Georg Brandl wrote:
Hi,
I have to make some modifications to the LyX source, so I have
to build it afresh on Windows.
What do you want to change?
If you are planning an improvement, please consider
getting it into LyX for the benefit of all. :-)
Helge Hafting
[EMAIL PROTECTED] schrieb:
On Wed, 13 Jun 2007, Georg Brandl wrote:
I have to make some modifications to the LyX source, so I have to
build it afresh on Windows.
What is the recommended way for doing that nowadays?
http://www.lyx.org/trac/browser/lyx-devel/trunk/INSTALL.Win32
In case
Georg Brandl schrieb:
I got the SVN to compile fine with the instructions, but after copying the .exe
over lyxc.exe of a completed 1.4.4 install, a dialog appears
Runtime Error R6034,
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's
Uwe Stöhr schrieb:
Georg Brandl schrieb:
I got the SVN to compile fine with the instructions, but after copying the
.exe
over lyxc.exe of a completed 1.4.4 install, a dialog appears
Runtime Error R6034,
An application has made an attempt to load the C runtime library incorrectly.
I got the SVN to compile fine with the instructions, but after
copying the .exe
over lyxc.exe of a completed 1.4.4 install, a dialog appears
Runtime Error R6034,
An application has made an attempt to load the C runtime library
incorrectly.
Please contact the application's support team for more
Uwe Stöhr schrieb:
> Georg Brandl schrieb:
>
>> I have to make some modifications to the LyX source, so I have
>> to build it afresh on Windows.
>>
>> What is the recommended way for doing that nowadays?
>
> http://www.lyx.org/trac/browser/lyx-devel/trunk/INSTALL.Win32
>
> regards Uwe
>
On Wed, 13 Jun 2007, Georg Brandl wrote:
I have to make some modifications to the LyX source, so I have to
build it afresh on Windows.
What is the recommended way for doing that nowadays?
http://www.lyx.org/trac/browser/lyx-devel/trunk/INSTALL.Win32
In case the instructions are incorrect
Georg Brandl wrote:
Hi,
I have to make some modifications to the LyX source, so I have
to build it afresh on Windows.
What do you want to change?
If you are planning an improvement, please consider
getting it into LyX for the benefit of all. :-)
Helge Hafting
[EMAIL PROTECTED] schrieb:
> On Wed, 13 Jun 2007, Georg Brandl wrote:
>
I have to make some modifications to the LyX source, so I have to
build it afresh on Windows.
What is the recommended way for doing that nowadays?
>>>
>>>
Georg Brandl schrieb:
I got the SVN to compile fine with the instructions, but after copying the .exe
over lyxc.exe of a completed 1.4.4 install, a dialog appears
"Runtime Error R6034,
An application has made an attempt to load the C runtime library incorrectly.
Please contact the
Uwe Stöhr schrieb:
> Georg Brandl schrieb:
>
>> I got the SVN to compile fine with the instructions, but after copying the
>> .exe
>> over lyxc.exe of a completed 1.4.4 install, a dialog appears
>>
>> "Runtime Error R6034,
>> An application has made an attempt to load the C runtime library
I got the SVN to compile fine with the instructions, but after
copying the .exe
over lyxc.exe of a completed 1.4.4 install, a dialog appears
"Runtime Error R6034,
An application has made an attempt to load the C runtime library
incorrectly.
Please contact the application's support team for
Hi,
I have to make some modifications to the LyX source, so I have
to build it afresh on Windows.
What is the recommended way for doing that nowadays? I found howtos
for Cygwin, MinGW; and the official Windows version seems to have
been built with MSVC...
(ideally, I'd want to just have to
Georg Brandl schrieb:
I have to make some modifications to the LyX source, so I have
to build it afresh on Windows.
What is the recommended way for doing that nowadays?
http://www.lyx.org/trac/browser/lyx-devel/trunk/INSTALL.Win32
regards Uwe
Hi,
I have to make some modifications to the LyX source, so I have
to build it afresh on Windows.
What is the recommended way for doing that nowadays? I found howtos
for Cygwin, MinGW; and the official Windows version seems to have
been built with MSVC...
(ideally, I'd want to just have to
Georg Brandl schrieb:
I have to make some modifications to the LyX source, so I have
to build it afresh on Windows.
What is the recommended way for doing that nowadays?
http://www.lyx.org/trac/browser/lyx-devel/trunk/INSTALL.Win32
regards Uwe
Hi,
I have to make some modifications to the LyX source, so I have
to build it afresh on Windows.
What is the recommended way for doing that nowadays? I found howtos
for Cygwin, MinGW; and the official Windows version seems to have
been built with MSVC...
(ideally, I'd want to just have to
Georg Brandl schrieb:
I have to make some modifications to the LyX source, so I have
to build it afresh on Windows.
What is the recommended way for doing that nowadays?
http://www.lyx.org/trac/browser/lyx-devel/trunk/INSTALL.Win32
regards Uwe
Hi!
You should give more details about the version of LyX you use. Does it happen
with all documents?
You should open a new bug here http://bugzilla.lyx.org/
Nicolás
Lennart wrote:
I am running lyx on windows XP. When I try to fill in the preamble lyx crashes
every time. I can click
401 - 500 of 1096 matches
Mail list logo
