I'd like to make the default fontsize scriptsize, and the default
alignment left.
I've tried
\renewcommand{\marginpar}[1]{\marginpar{{\fontsize scriptsize #1}}
and a few others but they don't seem to work.
I even tried editing my ~/.lyx/ui/default.ui to contain:
Item Marginal Note|M
Pierre Marc Dumuid wrote:
I'd like to make the default fontsize scriptsize, and the default
alignment left.
I've tried
\renewcommand{\marginpar}[1]{\marginpar{{\fontsize scriptsize #1}}
\renewcommand{\marginpar}[1]{\marginpar{{\raggedright\scriptsize #1}}
Herbert
--
Herbert Voss wrote:
Pierre Marc Dumuid wrote:
I'd like to make the default fontsize scriptsize, and the default
alignment left.
I've tried
\renewcommand{\marginpar}[1]{\marginpar{{\fontsize scriptsize #1}}
\renewcommand{\marginpar}[1]{\marginpar{{\raggedright\scriptsize #1}}
uups,
Hi,
I just switched to lyx1.2.0 and I encounter a small problem with the
algorithm environment. In my french documents, I want to see Algorithme
1 and not Algorithm 1. I used to hack this with TeX in lyx1.1.6 by
putting :
\renewcommand{\ALG@name}{Algorithme}
However, I can see that things have
I compiled lyx 1.2.0 on YellowDogLinux 2.0 (ppc processor) without problem.
It works very well, except that I cannot view any graphics in the lyx window.
I get the following error
Error creating pixmap from xpm_image 'XpmColorFailed'
and in lyx the picture box displays
Error scaling etc
I'd like to make the default fontsize scriptsize, and the default
alignment left in the margin notes...
I've tried:
\renewcommand{\marginpar}[1]{\marginpar{{\fontsize scriptsize #1}}
and a few others but they don't seem to work.
I even tried editing my ~/.lyx/ui/default.ui to contain:
Laurent == Laurent Duperval [EMAIL PROTECTED] writes:
Laurent Hi, I did an autogen and all yet when I try to compile from
Laurent CVS, I get these errors:
Laurent ** Cannot find flimage.h. Please check that the forms library
Laurent is correctly installed on your system.
This is because the
John == John Levon [EMAIL PROTECTED] writes:
John On Mon, Jun 03, 2002 at 09:42:32PM -0400, Laurent Duperval
John wrote:
This is what I've got. I even did a remove and an update but still
no dice. :-( THe code looks like this:
#include graphics/GraphicsImage.h #include FORMS_H_LOCATION
Nicolas SABOURET wrote:
I just switched to lyx1.2.0 and I encounter a small problem with the
algorithm environment. In my french documents, I want to see Algorithme
1 and not Algorithm 1. I used to hack this with TeX in lyx1.1.6 by
putting :
\renewcommand{\ALG@name}{Algorithme}
What happens
Matthieu == Matthieu Amiguet [EMAIL PROTECTED] writes:
Matthieu I compiled lyx 1.2.0 on YellowDogLinux 2.0 (ppc processor)
Matthieu without problem. It works very well, except that I cannot
Matthieu view any graphics in the lyx window. I get the following
Matthieu error
Matthieu Error creating
Nicolas SABOURET wrote:
However, I see two objections :
1. since \usepackage{babel} is invoked later on, its definitions will
override mine :)
Yes, it is annoying, but this has been discussed extensively on the devel
list. The arguments were, as I recall:
For cases like yours, there is a
Nicolas == Nicolas SABOURET [EMAIL PROTECTED] writes:
Nicolas Juergen Spitzmueller wrote:
What happens if you type \usepackage{babel} in the preamble
*before* the redefinition?
Nicolas Yes, it could be an idea (actually, it is logical since my
Nicolas definition had the purpose to override
Jean-Marc Lasgouttes wrote:
Nicolas == Nicolas SABOURET [EMAIL PROTECTED] writes:
Nicolas Juergen Spitzmueller wrote:
What happens if you type \usepackage{babel} in the preamble
*before* the redefinition?
Nicolas Yes, it could be an idea (actually, it is logical since my
Nicolas
Hi,
Please let me ask a second question :) related to the new interface.
I used to type the french oeuvre (\oe{} uvre in LaTeX) with :
[C-l]\oe uvre[C-l].
However, with the new interface, C-l doesn't let me out the latex box.
What can I do to type this word quickly ?
Thanks in advance,
On Tue, Jun 04, 2002 at 11:49:41AM +0200, Nicolas SABOURET wrote:
However, with the new interface, C-l doesn't let me out the latex box.
What can I do to type this word quickly ?
Esc
This does not close the box, though...
Andre'
--
Those who desire to give up Freedom in order to gain
What is the 'lyx -version' output?
LyX 1.2.0 of Thu, May 23, 2002
Built on May 31 2002, 08:56:05
Configuration
Host type: powerpc-unknown-linux-gnu
Special build flags:included-libsigc
C Compiler: gcc
C Compiler flags:
On Tue, 4 Jun 2002, Nicolas SABOURET wrote:
Please let me ask a second question :) related to the new interface.
I used to type the french oeuvre (\oe{} uvre in LaTeX) with :
[C-l]\oe uvre[C-l].
However, with the new interface, C-l doesn't let me out the latex box.
What can I do to type
Le Mardi 4 Juin 2002 10:35, Wayan a écrit :
I think C-l for lyx-1.1.6 is better than 1.2.0. If I highlight/block a
word then type C-l, with lyx-1.1.6 will automatically turn it to ERT
mode. For lyx-1.2.0 will open a latex box, the text is not automatically
moved into the box. Need more time
On Tue, Jun 04, 2002 at 11:21:18AM +, Renaud MICHEL wrote:
I agree, the new LaTeX box is great (particularly in tables, it take very
few space when closed) and I know it is possible to make it inline (by
right clicking) but is it possible to bind it/add it in the menu (for
example to
Renaud == Renaud MICHEL [EMAIL PROTECTED] writes:
Renaud Le Mardi 4 Juin 2002 10:35, Wayan a écrit :
I think C-l for lyx-1.1.6 is better than 1.2.0. If I
highlight/block a word then type C-l, with lyx-1.1.6 will
automatically turn it to ERT mode. For lyx-1.2.0 will open a latex
box, the
Andre Poenitz wrote:
I agree, the new LaTeX box is great (particularly in tables, it take very
few space when closed) and I know it is possible to make it inline (by
right clicking) but is it possible to bind it/add it in the menu (for
example to have C-l make an inline box and C-S-l make
Wayan == Wayan [EMAIL PROTECTED] writes:
Wayan I think C-l for lyx-1.1.6 is better than 1.2.0. If I
Wayan highlight/block a word then type C-l, with lyx-1.1.6 will
Wayan automatically turn it to ERT mode. For lyx-1.2.0 will open a
Wayan latex box, the text is not automatically moved into the
Nicolas == Nicolas SABOURET [EMAIL PROTECTED] writes:
Nicolas Hi, Please let me ask a second question :) related to the new
Nicolas interface. I used to type the french oeuvre (\oe{} uvre in
Nicolas LaTeX) with : [C-l]\oe uvre[C-l]. However, with the new
Nicolas interface, C-l doesn't let me
On 4 Jun 2002, Jean-Marc Lasgouttes wrote:
There is a bug open about that in bugzilla:
http://bugzilla.lyx.org/show_bug.cgi?id=93
Thank for the link. I didn't mention it before.
Wayan
I am subscribed to the list, why do some of you (recently Jean-Marc and
Juergen) keep on putting my mail address in the To: with the ML address in
the CC:, I don't need to receive it twice.
Please stop adding my email when you reply to the list.
Thanks ;)
--
Renaud Michel
Les femmes ont plus
On Tue, Jun 04, 2002 at 10:17:43AM +0200, Matthieu Amiguet wrote:
Error creating pixmap from xpm_image 'XpmColorFailed'
Upgrade your version of ImageMagick (convert), or use a different
program to convert your images, or use a version of xforms with an
internal image loader capability.
On Tue, Jun 04, 2002 at 10:30:14AM +0200, Jean-Marc Lasgouttes wrote:
This is what I've got. I even did a remove and an update but still
no dice. :-( THe code looks like this:
#include graphics/GraphicsImage.h #include FORMS_H_LOCATION
#include flimage.h
John I don't remember
On Tue, Jun 04, 2002 at 10:29:21AM +0200, Jean-Marc Lasgouttes wrote:
This is because the configure script is currently broken with anything
but xforms 1.0rc2. This will get fixed eventually (ie as soon as I
find tie for it :)
What still goes wrong after my last commit ?
john
--
Do you
Renaud MICHEL wrote:
I am subscribed to the list, why do some of you (recently Jean-Marc and
Juergen) keep on putting my mail address in the To: with the ML address in
the CC:, I don't need to receive it twice.
Please stop adding my email when you reply to the list.
Thanks ;)
That happens
John == John Levon [EMAIL PROTECTED] writes:
John On Tue, Jun 04, 2002 at 10:17:43AM +0200, Matthieu Amiguet
John wrote:
Error creating pixmap from xpm_image 'XpmColorFailed'
John Upgrade your version of ImageMagick (convert), or use a
John different program to convert your images, or use a
On Tue, Jun 04, 2002 at 12:42:30PM +, Renaud MICHEL wrote:
Please stop adding my email when you reply to the list.
This usually happens when one does a reply to all since you and the list
are either in the From: or in the CC:. This is for a few people easier
than to manually change that
Renaud == Renaud MICHEL [EMAIL PROTECTED] writes:
Renaud I am subscribed to the list, why do some of you (recently
Renaud Jean-Marc and Juergen) keep on putting my mail address in the
Renaud To: with the ML address in the CC:, I don't need to receive it
Renaud twice. Please stop adding my email
Pierre Marc Dumuid wrote:
your solution, didn't seem to work. When I export to latex, I get the
message:
..
Runaway argument?
{\myMargin {{\raggedright \scriptsize ##1}} \usepackage {babel}
\makeatother \E
TC.
! File ended while scanning use of \@argdef.
inserted text
:::¶óº§ Àü¹® ȸ»ç ¿ÀÇǽºÇÁ¶óÀÚ:::
¿ÀÇǽºÇÁ¶óÀÚ È¨ÆäÀÌÁö °³ÆíÀ» ¸ÂÀÌÇÏ¿© ¼îÇθô ±¸¸Å °í°´Áß 50,000¿ø ÀÌ»ó ±¸¸Å
°í°´²² Ãß÷À» ÅëÇÏ¿© ǪÁüÇÑ °æÇ°À» µå¸³´Ï´Ù.
(´Ü ȸ¿ø°í°´¿¡ ÇÑÇÔ)
±â°£ :2002³â 6¿ù30ÀϱîÁö
1µî : ·¹ÀÌÀú ÇÁ¸°ÅÍ(1¸í)
2µî : CD-Writer
Le Mardi 4 Juin 2002 13:04, Juergen Spitzmueller a écrit :
That happens when I hit the Reply to all-button (Reply gives just
your private address here). I have to delete your adress manually, and
sometimes I am just too lazy.
That's because the ML server doesn't modify the Reply-To field to
Date: Tue, 04 Jun 2002 16:01:52 +0100
From: Qing-Chang Zhong [EMAIL PROTECTED]
To: LyX users [EMAIL PROTECTED]
Subject: path of input files
Dear All,
I had a problem with the path of figures. I would like to
combine several papers into one report. So I used the report
class and included the
Le Mardi, 4 Juin 2002 14.47, John Levon a écrit :
On Tue, Jun 04, 2002 at 10:17:43AM +0200, Matthieu Amiguet wrote:
Error creating pixmap from xpm_image 'XpmColorFailed'
Upgrade your version of ImageMagick (convert), or use a different
program to convert your images, or use a version of
Matthieu Amiguet wrote:
I've got ImageMagick-5.2.7-2.
On my laptop, I've got Image-Magick-5.2.6-4, whcih seems older, and it works.
Does the problem really come from ImageMagick?
NB: convert seems to work, at least partially, as I get
Image conversion succeeded.
Loading image.
Image
On Tue, 4 Jun 2002, Matthieu Amiguet wrote:
I've got ImageMagick-5.2.7-2.
the newest version 5.4.4
On my laptop, I've got Image-Magick-5.2.6-4, whcih seems older, and it works.
Does the problem really come from ImageMagick?
NB: convert seems to work, at least partially, as I get
Image
-Original Message-
From: Andre Poenitz [mailto:[EMAIL PROTECTED]]
I think you get only captions if you put the table in a float.
I am not sure, though.
Andre'
I believe that the LaTeX ccaption package will allow you to create captioned tables
and figures that are
On Tue, Jun 04, 2002 at 03:18:39PM +0200, Jean-Marc Lasgouttes wrote:
John Upgrade your version of ImageMagick (convert), or use a
John different program to convert your images, or use a version of
John xforms with an internal image loader capability.
Could you document that somewhere?
I
John == John Levon [EMAIL PROTECTED] writes:
John On Tue, Jun 04, 2002 at 03:18:39PM +0200, Jean-Marc Lasgouttes
John wrote: Upgrade your version of ImageMagick (convert), or use a
John different program to convert your images, or use a version of
John xforms with an internal image loader
On Tue, Jun 04, 2002 at 06:17:52PM +0200, Jean-Marc Lasgouttes wrote:
John, you're a hero.
Yes I know !
john
--
Do you mean to tell me that The Prince is not the set textbook for CS1072
Professional Issues ? What on earth do you learn in that course ?
- David Lester
I'm currently rewriting a lot of stuff from school with lyx ..
I'm currently rewriting a lot of stuff from school with lyx ..
all the graphics are drawn in xfig and then exported as *.eps
the previous versions of lyx acepted this format ..
but what vector based drawing program should i use whith the 1.2.x version
at the time i've no clue how to get all the
Dear All,
Thanks to Jean-Pierre, \graphicspath would be the best
solution for searching graphics when combining several lyx
files into one file. However, \graphicspath does not work
well in Windows/Lyx/MikTex. It works well with exported tex
files. My lyx is 1.1.6.fix1.
I tried:
On Mon, Jun 03, 2002 at 12:02:48PM -0700, Rich Shepard wrote:
On Mon, 3 Jun 2002, Herbert Voss wrote:
multicolumn in the table makes only sense, if you have _really_
multicolumns or something special in the table. But you wanted
only a fixed wisth with left alignment.
Herbert,
On Tue, 4 Jun 2002, Clemens Auer wrote:
I'm currently rewriting a lot of stuff from school with lyx ..
all the graphics are drawn in xfig and then exported as *.eps
the previous versions of lyx acepted this format ..
but what vector based drawing program should i use whith the 1.2.x version
On Tue, Jun 04, 2002 at 11:05:04AM +0200, Jean-Marc Lasgouttes wrote:
Nicolas == Nicolas SABOURET [EMAIL PROTECTED] writes:
Nicolas Juergen Spitzmueller wrote:
What happens if you type \usepackage{babel} in the preamble
*before* the redefinition?
Nicolas Yes, it could be an idea
Qing-Chang Zhong wrote:
\graphicspath{/cygdrive/e/work}
\graphicspath{//e/work}
\graphicspath{e:/work}
\graphicspath{{/cygdrive/e/work/}}
Herbert
--
http://www.lyx.org/help/
I just built and installed lyx-1.2.0 on sparc-solaris-8. The
makefiles still require gnumake instead of the standard Solaris make,
and the mathed directory library will generates a segmentation
violation from the Solaris ar. Otherwise, it built without problems,
using gcc-2.95.3. I'm still
On Mon, 3 Jun 2002, Dekel Tsur wrote:
Use a table float (Insert-Floats-Table float).
Dekel,
I did this, thank you.
Instead, set the width for the entire column in the column/row tab,
and set the alignment of the paragraph in the top cell to center using the
paragraph dialog.
Cannot
Congrads. I do not have gnumake. Make goes a little bit further if I use
./configure --disable-nls but I still get error messages. In my opinion,
if ./configure successeswbut make fails, there is a bug somewhere.
Bo
On Tue, Jun 04, 2002 at 03:04:14PM -0400, Ronald Florence wrote:
I just built
On 4 Jun, John Levon wrote:
On Tue, Jun 04, 2002 at 10:29:21AM +0200, Jean-Marc Lasgouttes wrote:
This is because the configure script is currently broken with anything
but xforms 1.0rc2. This will get fixed eventually (ie as soon as I
find tie for it :)
What still goes wrong after my
On Tue, Jun 04, 2002 at 05:18:55PM -0400, Laurent Duperval wrote:
I got it to compile at work this morning by deleting everything and
doing a clean update. I'll try the same at home and I'm hoping it'll
work.
Actually I just screwed up, I assumed you were compiling the 1.2 branch
for some
Hello,
I've written my whole doctoral dissertation in LyX, and it has worked
like a charm until a recent upgrade to the newest version. I cannot even
get the DVI to display now, which is kind of disconcerting considering
that I need to turn in the thing soon!
Some background: My dissertation
On Mon, 3 Jun 2002, Herbert Voss wrote:
file attached
Herbert,
Pardon my naivety, but I'll be learning quickly here.
When I export my document (with table) as LaTeX (because I cannot export
it as dvi) this is what I see for the title section:
\title{Wetlands and Mining%
Hi all,
I want to create some some foils with the seminar-class. I got some
problems with this:
1. The slide/slide* style is not aktive - that means I can not activate
it and if I insert the Latex command I got error messages
2. Making an new slide with the LandScape/PortraitSlide Option works
I thought it may come to that, I liked the nice pop-away neatly margin
box in the lyx GUI though...
Do you think its possible to modify the line in ~/.lyx/ui/default.ui
containing:
Item Marginal Note|M marginalnote-insert
to something like:
Item Marginal Note|M command-sequence
Rich Shepard wrote:
When I export my document (with table) as LaTeX (because I cannot export
it as dvi) this is what I see for the title section:
\title{Wetlands and Mining%
\thanks{Copyright \copyright 2002 Applied Ecosystem Services, Inc.
}}
The file you sent back to me has this:
Hello
Using klyx 0.11 under mandrake 8.2, some symbols don't appears on the
screen : sum, integral, some greek caracters...
Viewing and printing is ok.
I think it is a font problem, but i doesn't know how to find the font
that is missing.
Thanks
--
Michel Gosse
Pierre Marc Dumuid wrote:
I thought it may come to that, I liked the nice pop-away neatly margin
box in the lyx GUI though...
Do you think its possible to modify the line in ~/.lyx/ui/default.ui
containing:
write this in preamble, than you can you use the
menu entry for marginpars
On Mon, Jun 03, 2002 at 06:25:51PM -0400, Gosse Michel wrote:
Hello
Using klyx 0.11 under mandrake 8.2, some symbols don't appears on the
screen : sum, integral, some greek caracters...
[klyx is an old branch of LyX and has not been supported for four years
now.]
Having said that, has
On Tue, Jun 04, 2002 at 11:14:21PM -0500, Chunbai Wang wrote:
I need to type an acute letter in my paper's reference. How to do that?
I use Compose ' e to type é.
If you don't have one set up or can't find it you could create the char
with any other program (like Ctrl-K ' e in vim) and
Hi, Sir:
I need to type an acute letter in my paper's reference. How to do that?
Thanks
Chunbai
I'd like to make the default fontsize scriptsize, and the default
alignment left.
I've tried
\renewcommand{\marginpar}[1]{\marginpar{{\fontsize scriptsize #1}}
and a few others but they don't seem to work.
I even tried editing my ~/.lyx/ui/default.ui to contain:
Item Marginal Note|M
Pierre Marc Dumuid wrote:
I'd like to make the default fontsize scriptsize, and the default
alignment left.
I've tried
\renewcommand{\marginpar}[1]{\marginpar{{\fontsize scriptsize #1}}
\renewcommand{\marginpar}[1]{\marginpar{{\raggedright\scriptsize #1}}
Herbert
--
Herbert Voss wrote:
Pierre Marc Dumuid wrote:
I'd like to make the default fontsize scriptsize, and the default
alignment left.
I've tried
\renewcommand{\marginpar}[1]{\marginpar{{\fontsize scriptsize #1}}
\renewcommand{\marginpar}[1]{\marginpar{{\raggedright\scriptsize #1}}
uups,
Hi,
I just switched to lyx1.2.0 and I encounter a small problem with the
algorithm environment. In my french documents, I want to see Algorithme
1 and not Algorithm 1. I used to hack this with TeX in lyx1.1.6 by
putting :
\renewcommand{\ALG@name}{Algorithme}
However, I can see that things have
I compiled lyx 1.2.0 on YellowDogLinux 2.0 (ppc processor) without problem.
It works very well, except that I cannot view any graphics in the lyx window.
I get the following error
Error creating pixmap from xpm_image 'XpmColorFailed'
and in lyx the picture box displays
Error scaling etc
I'd like to make the default fontsize scriptsize, and the default
alignment left in the margin notes...
I've tried:
\renewcommand{\marginpar}[1]{\marginpar{{\fontsize scriptsize #1}}
and a few others but they don't seem to work.
I even tried editing my ~/.lyx/ui/default.ui to contain:
Laurent == Laurent Duperval [EMAIL PROTECTED] writes:
Laurent Hi, I did an autogen and all yet when I try to compile from
Laurent CVS, I get these errors:
Laurent ** Cannot find flimage.h. Please check that the forms library
Laurent is correctly installed on your system.
This is because the
John == John Levon [EMAIL PROTECTED] writes:
John On Mon, Jun 03, 2002 at 09:42:32PM -0400, Laurent Duperval
John wrote:
This is what I've got. I even did a remove and an update but still
no dice. :-( THe code looks like this:
#include graphics/GraphicsImage.h #include FORMS_H_LOCATION
Nicolas SABOURET wrote:
I just switched to lyx1.2.0 and I encounter a small problem with the
algorithm environment. In my french documents, I want to see Algorithme
1 and not Algorithm 1. I used to hack this with TeX in lyx1.1.6 by
putting :
\renewcommand{\ALG@name}{Algorithme}
What happens
Matthieu == Matthieu Amiguet [EMAIL PROTECTED] writes:
Matthieu I compiled lyx 1.2.0 on YellowDogLinux 2.0 (ppc processor)
Matthieu without problem. It works very well, except that I cannot
Matthieu view any graphics in the lyx window. I get the following
Matthieu error
Matthieu Error creating
Nicolas SABOURET wrote:
However, I see two objections :
1. since \usepackage{babel} is invoked later on, its definitions will
override mine :)
Yes, it is annoying, but this has been discussed extensively on the devel
list. The arguments were, as I recall:
For cases like yours, there is a
Nicolas == Nicolas SABOURET [EMAIL PROTECTED] writes:
Nicolas Juergen Spitzmueller wrote:
What happens if you type \usepackage{babel} in the preamble
*before* the redefinition?
Nicolas Yes, it could be an idea (actually, it is logical since my
Nicolas definition had the purpose to override
Jean-Marc Lasgouttes wrote:
Nicolas == Nicolas SABOURET [EMAIL PROTECTED] writes:
Nicolas Juergen Spitzmueller wrote:
What happens if you type \usepackage{babel} in the preamble
*before* the redefinition?
Nicolas Yes, it could be an idea (actually, it is logical since my
Nicolas
Hi,
Please let me ask a second question :) related to the new interface.
I used to type the french oeuvre (\oe{} uvre in LaTeX) with :
[C-l]\oe uvre[C-l].
However, with the new interface, C-l doesn't let me out the latex box.
What can I do to type this word quickly ?
Thanks in advance,
On Tue, Jun 04, 2002 at 11:49:41AM +0200, Nicolas SABOURET wrote:
However, with the new interface, C-l doesn't let me out the latex box.
What can I do to type this word quickly ?
Esc
This does not close the box, though...
Andre'
--
Those who desire to give up Freedom in order to gain
What is the 'lyx -version' output?
LyX 1.2.0 of Thu, May 23, 2002
Built on May 31 2002, 08:56:05
Configuration
Host type: powerpc-unknown-linux-gnu
Special build flags:included-libsigc
C Compiler: gcc
C Compiler flags:
On Tue, 4 Jun 2002, Nicolas SABOURET wrote:
Please let me ask a second question :) related to the new interface.
I used to type the french oeuvre (\oe{} uvre in LaTeX) with :
[C-l]\oe uvre[C-l].
However, with the new interface, C-l doesn't let me out the latex box.
What can I do to type
Le Mardi 4 Juin 2002 10:35, Wayan a écrit :
I think C-l for lyx-1.1.6 is better than 1.2.0. If I highlight/block a
word then type C-l, with lyx-1.1.6 will automatically turn it to ERT
mode. For lyx-1.2.0 will open a latex box, the text is not automatically
moved into the box. Need more time
On Tue, Jun 04, 2002 at 11:21:18AM +, Renaud MICHEL wrote:
I agree, the new LaTeX box is great (particularly in tables, it take very
few space when closed) and I know it is possible to make it inline (by
right clicking) but is it possible to bind it/add it in the menu (for
example to
Renaud == Renaud MICHEL [EMAIL PROTECTED] writes:
Renaud Le Mardi 4 Juin 2002 10:35, Wayan a écrit :
I think C-l for lyx-1.1.6 is better than 1.2.0. If I
highlight/block a word then type C-l, with lyx-1.1.6 will
automatically turn it to ERT mode. For lyx-1.2.0 will open a latex
box, the
Andre Poenitz wrote:
I agree, the new LaTeX box is great (particularly in tables, it take very
few space when closed) and I know it is possible to make it inline (by
right clicking) but is it possible to bind it/add it in the menu (for
example to have C-l make an inline box and C-S-l make
Wayan == Wayan [EMAIL PROTECTED] writes:
Wayan I think C-l for lyx-1.1.6 is better than 1.2.0. If I
Wayan highlight/block a word then type C-l, with lyx-1.1.6 will
Wayan automatically turn it to ERT mode. For lyx-1.2.0 will open a
Wayan latex box, the text is not automatically moved into the
Nicolas == Nicolas SABOURET [EMAIL PROTECTED] writes:
Nicolas Hi, Please let me ask a second question :) related to the new
Nicolas interface. I used to type the french oeuvre (\oe{} uvre in
Nicolas LaTeX) with : [C-l]\oe uvre[C-l]. However, with the new
Nicolas interface, C-l doesn't let me
On 4 Jun 2002, Jean-Marc Lasgouttes wrote:
There is a bug open about that in bugzilla:
http://bugzilla.lyx.org/show_bug.cgi?id=93
Thank for the link. I didn't mention it before.
Wayan
I am subscribed to the list, why do some of you (recently Jean-Marc and
Juergen) keep on putting my mail address in the To: with the ML address in
the CC:, I don't need to receive it twice.
Please stop adding my email when you reply to the list.
Thanks ;)
--
Renaud Michel
Les femmes ont plus
On Tue, Jun 04, 2002 at 10:17:43AM +0200, Matthieu Amiguet wrote:
Error creating pixmap from xpm_image 'XpmColorFailed'
Upgrade your version of ImageMagick (convert), or use a different
program to convert your images, or use a version of xforms with an
internal image loader capability.
On Tue, Jun 04, 2002 at 10:30:14AM +0200, Jean-Marc Lasgouttes wrote:
This is what I've got. I even did a remove and an update but still
no dice. :-( THe code looks like this:
#include graphics/GraphicsImage.h #include FORMS_H_LOCATION
#include flimage.h
John I don't remember
On Tue, Jun 04, 2002 at 10:29:21AM +0200, Jean-Marc Lasgouttes wrote:
This is because the configure script is currently broken with anything
but xforms 1.0rc2. This will get fixed eventually (ie as soon as I
find tie for it :)
What still goes wrong after my last commit ?
john
--
Do you
Renaud MICHEL wrote:
I am subscribed to the list, why do some of you (recently Jean-Marc and
Juergen) keep on putting my mail address in the To: with the ML address in
the CC:, I don't need to receive it twice.
Please stop adding my email when you reply to the list.
Thanks ;)
That happens
John == John Levon [EMAIL PROTECTED] writes:
John On Tue, Jun 04, 2002 at 10:17:43AM +0200, Matthieu Amiguet
John wrote:
Error creating pixmap from xpm_image 'XpmColorFailed'
John Upgrade your version of ImageMagick (convert), or use a
John different program to convert your images, or use a
On Tue, Jun 04, 2002 at 12:42:30PM +, Renaud MICHEL wrote:
Please stop adding my email when you reply to the list.
This usually happens when one does a reply to all since you and the list
are either in the From: or in the CC:. This is for a few people easier
than to manually change that
Renaud == Renaud MICHEL [EMAIL PROTECTED] writes:
Renaud I am subscribed to the list, why do some of you (recently
Renaud Jean-Marc and Juergen) keep on putting my mail address in the
Renaud To: with the ML address in the CC:, I don't need to receive it
Renaud twice. Please stop adding my email
Pierre Marc Dumuid wrote:
your solution, didn't seem to work. When I export to latex, I get the
message:
..
Runaway argument?
{\myMargin {{\raggedright \scriptsize ##1}} \usepackage {babel}
\makeatother \E
TC.
! File ended while scanning use of \@argdef.
inserted text
:::¶óº§ Àü¹® ȸ»ç ¿ÀÇǽºÇÁ¶óÀÚ:::
¿ÀÇǽºÇÁ¶óÀÚ È¨ÆäÀÌÁö °³ÆíÀ» ¸ÂÀÌÇÏ¿© ¼îÇθô ±¸¸Å °í°´Áß 50,000¿ø ÀÌ»ó ±¸¸Å
°í°´²² Ãß÷À» ÅëÇÏ¿© ǪÁüÇÑ °æÇ°À» µå¸³´Ï´Ù.
(´Ü ȸ¿ø°í°´¿¡ ÇÑÇÔ)
±â°£ :2002³â 6¿ù30ÀϱîÁö
1µî : ·¹ÀÌÀú ÇÁ¸°ÅÍ(1¸í)
2µî : CD-Writer
Le Mardi 4 Juin 2002 13:04, Juergen Spitzmueller a écrit :
That happens when I hit the Reply to all-button (Reply gives just
your private address here). I have to delete your adress manually, and
sometimes I am just too lazy.
That's because the ML server doesn't modify the Reply-To field to
1 - 100 of 195 matches
Mail list logo