Hello,
I recently post a message about a problem in screen mode with the displaying
of accentuated characters (french in fact, like à, é, è, ...) in the table
of contents window.
The same thing appears when I paste a text which contain that kind of
characters. Or if I insert an accentuated
Myriam Abramson schrieb:
I get an error when using title in seminar layout.
I'm enclosing a test file. I'm using lyx 1.2.2.
use the title outside of a slide environment
Herbert
--
http://www.educat.hu-berlin.de/~voss/lyx/
Dear LyX Users
Has anyone tried to bring some latexcad-Drawings (*.lp) into LyX? If
there is any experience on this topic out there I would be very
interested on Infomation Exchange
Greetings
Dubrakvo Dolic
Remzi wrote:
http://www.educat.hu-berlin.de/~voss/lyx/fancy/pagenumsfancyh.lyx
Thanks to Remzi and Matej for your responses. Your solution required
me to define a new pagestyle myfancy and to duplicate this by redefining
the plain pagestyle. Thus I deduce that the first page of a chapter is
by
On Tue, Feb 11, 2003 at 07:53:55PM -0500, Praedor Tempus Atrebates wrote:
Thanks. The fix was to add \usepackage{pslatex} to the preamble.
Don't add this package manually. You can change the font in the document
dialog.
You can also get good PDF without changing the font. Read Extended.lyx
Max Bian wrote:
Sorry. My document is article (Revtex4). There is no lyx-code or
comment.
Any idea?
Max
--- I Wayan Warmada [EMAIL PROTECTED] wrote:
put the cursor in the firstline of paragraph, then select in the list
comment [Kommentar, in my LyX], which is normally below the
Angus Leeming sagte:
Could you not add a Note inset to your document and cut and paste the
stuff
into it. This has the advantage that all your typesetting is
preserved,
whereas the comment environment would chew it up.
in preamble \usepackage{comment}
and then
\begin{comment}% in TeX(red)
Andre Poenitz wrote:
On Wed, Feb 12, 2003 at 05:45:31PM +1100, Hugues Talbot wrote:
Anyone experiencing the same problem?
Yes this was reported already. But no solution has emered so far.
Note that the xforms frontend does not have that particular problem.
Dekel apparently fixed the
[EMAIL PROTECTED] wrote:
I have a little problem for putting url in my document.
I used Insert URL menu to insert URL but as this url is very long it
doesn't fit on one line.
And lyx doesn't break the output on the postscript output.
How can i break this url without hyphenation?
Did you
On Wed, Feb 12, 2003 at 08:55:59AM +0100, [EMAIL PROTECTED] wrote:
I have a little problem for putting url in my document.
I used Insert URL menu to insert URL but as this url is very long it
doesn't fit on one line.
And lyx doesn't break the output on the postscript output.
How can i
On Wed, 12 Feb 2003, Dekel Tsur wrote:
On Wed, Feb 12, 2003 at 08:55:59AM +0100, [EMAIL PROTECTED] wrote:
I have a little problem for putting url in my document.
I used Insert URL menu to insert URL but as this url is very long it
doesn't fit on one line.
And lyx doesn't break the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 11 February 2003 07:56 pm, Praedor Tempus Atrebates wrote:
I created my own reference style for my thesis using makebst. I
specifically selected that journal names should be underlined rather than
italicized but when the reference list
[EMAIL PROTECTED] wrote:
my problem is that i have it but it simply doesn't work.
Try to add \- (or just - ) into the URL window of LyX in the point
where breaking of line is suggested.
Matej
--
Matej Cepl,
Finger: 89EF 4BC6 288A BF43 1BAB 25C3 E09F EF25 D964 84AC
138 Highland Ave. #10,
Michael Jaeger schrieb:
everything works fine, but I've got a list of tables and after this, on the
next page, I've got a list of abbreviations where I chose the chapter*
environment to format the heading List of abbreviations. Now, this list is
two pages long and on the second page the
[EMAIL PROTECTED] schrieb:
On Wed, 12 Feb 2003, Dekel Tsur wrote:
On Wed, Feb 12, 2003 at 08:55:59AM +0100, [EMAIL PROTECTED] wrote:
I have a little problem for putting url in my document.
I used Insert URL menu to insert URL but as this url is very long it
doesn't fit on one line.
And
Christian Ridderström schrieb:
On Wed, 12 Feb 2003, Herbert Voss wrote:
\usepackage{mathptmx}% instead of package times
\usepackage[scaled=0.9]{helvet} % or [scaled=0.92], if you like
Hmm... I just tried this and get the error:
LaTeX Error: Unknown option `scaled=0.9' for package `helvet'.
On Wed, 12 Feb 2003, Herbert Voss wrote:
Christian Ridderström schrieb:
On Wed, 12 Feb 2003, Herbert Voss wrote:
\usepackage{mathptmx}% instead of package times
\usepackage[scaled=0.9]{helvet} % or [scaled=0.92], if you like
Hmm... I just tried this and get the error:
On Wed, 12 Feb 2003, Herbert Voss wrote:
Christian Ridderström schrieb:
On Wed, 12 Feb 2003, Herbert Voss wrote:
\usepackage{mathptmx}% instead of package times
\usepackage[scaled=0.9]{helvet} % or [scaled=0.92], if you like
Hmm... I just tried this and get the error:
On Tue, 2003-02-11 at 22:29, Dekel Tsur wrote:
On Tue, Feb 11, 2003 at 07:29:04PM +0100, Pierrick Mellerin wrote:
Hello,
Lyx-1.3.0-1 is a wonderful program ...
I have a little problem with the displaying of the table of contents in
the screen mode. Accentuated characters (like
I have a bunch of eps graphs that I'd like to annotate with LaTeX
(axis labels, stuff like that). Can anyone give me some pointers to
the best way to go about this?
Regards,
Angus
Christian Ridderström schrieb:
On Wed, 12 Feb 2003, Herbert Voss wrote:
Christian Ridderström schrieb:
On Wed, 12 Feb 2003, Herbert Voss wrote:
\usepackage{mathptmx}% instead of package times
\usepackage[scaled=0.9]{helvet} % or [scaled=0.92], if you like
Hmm... I just tried this and
Christian Ridderström schrieb:
\ProvidesPackage{helvet}
[1999/03/29 PSNFSS v.7.2
update this package
Herbert
--
http://www.educat.hu-berlin.de/~voss/lyx/
On Wed, 12 Feb 2003, Herbert Voss wrote:
Christian Ridderström schrieb:
\ProvidesPackage{helvet}
[1999/03/29 PSNFSS v.7.2
update this package
Herbert
Thanks, I've told my systems administrator and hopefully he'll update the
package.
/Christian
--
Christian Ridderström, +46-8-790
Hi all,
I'm experiencing a problem I hadn't seen with the 1.1.x series, now that I
moved to the 1.3 version. I'm using the lyx.org supplied RedHat 8.0 binaries
with the QT front end.
The problem is that the lyxpipe.in/out files in ~/.lyx/ appear not to be
destroyed when lyx exits:
[~] \rm
I have put the latest xforms on and the spell checker still isnt
working. Has anyone else got this problem?
Owen Lucas wrote:
I have installed lyx 1.3 on my RH7.3 box with xforms xforms-0.89-1
I ame using the british language package for aspell
When using the spell checker the text boxes do not
Hello
I would install Lyx 1.3.0 for Mandrake, but i become the error i can't
found qt 2.2.1 . In the readme-file i have read Lyx needs qt 3.0.5.
What can i do ?
MfG Har
harmel wrote:
I would install Lyx 1.3.0 for Mandrake, but i become the error i can't
found qt 2.2.1 . In the readme-file i have read Lyx needs qt 3.0.5.
What can i do ?
Check which version of Qt you have. If it is less than 2.2.1,
than upgrade. However, do not panick -- I have here very happy
I sew checkingmaple...yes in #./configure results.
How can work Lyx with Maple? It is possible?
Thanks
T.K.
Angus wrote:
I have a bunch of eps graphs that I'd like to annotate with LaTeX
(axis labels, stuff like that). Can anyone give me some pointers to
the best way to go about this?
If your graphs are of the mathematical kind, then check out the pstricks
package and pst-plot. A description is given
Our network services tell us that the network for the whole campus will be
down Feb 23--and perhaps starting the day before.
I'll tell you the exact day when we get closer. In any case, I will use
this time to retire this old server, and move the list to a new one (keep
name, IP, etc).
Hello,
I recently post a message about a problem in screen mode with the displaying
of accentuated characters (french in fact, like à, é, è, ...) in the table
of contents window.
The same thing appears when I paste a text which contain that kind of
characters. Or if I insert an accentuated
Myriam Abramson schrieb:
I get an error when using title in seminar layout.
I'm enclosing a test file. I'm using lyx 1.2.2.
use the title outside of a slide environment
Herbert
--
http://www.educat.hu-berlin.de/~voss/lyx/
Dear LyX Users
Has anyone tried to bring some latexcad-Drawings (*.lp) into LyX? If
there is any experience on this topic out there I would be very
interested on Infomation Exchange
Greetings
Dubrakvo Dolic
Remzi wrote:
http://www.educat.hu-berlin.de/~voss/lyx/fancy/pagenumsfancyh.lyx
Thanks to Remzi and Matej for your responses. Your solution required
me to define a new pagestyle myfancy and to duplicate this by redefining
the plain pagestyle. Thus I deduce that the first page of a chapter is
by
On Tue, Feb 11, 2003 at 07:53:55PM -0500, Praedor Tempus Atrebates wrote:
Thanks. The fix was to add \usepackage{pslatex} to the preamble.
Don't add this package manually. You can change the font in the document
dialog.
You can also get good PDF without changing the font. Read Extended.lyx
Max Bian wrote:
Sorry. My document is article (Revtex4). There is no lyx-code or
comment.
Any idea?
Max
--- I Wayan Warmada [EMAIL PROTECTED] wrote:
put the cursor in the firstline of paragraph, then select in the list
comment [Kommentar, in my LyX], which is normally below the
Angus Leeming sagte:
Could you not add a Note inset to your document and cut and paste the
stuff
into it. This has the advantage that all your typesetting is
preserved,
whereas the comment environment would chew it up.
in preamble \usepackage{comment}
and then
\begin{comment}% in TeX(red)
Andre Poenitz wrote:
On Wed, Feb 12, 2003 at 05:45:31PM +1100, Hugues Talbot wrote:
Anyone experiencing the same problem?
Yes this was reported already. But no solution has emered so far.
Note that the xforms frontend does not have that particular problem.
Dekel apparently fixed the
[EMAIL PROTECTED] wrote:
I have a little problem for putting url in my document.
I used Insert URL menu to insert URL but as this url is very long it
doesn't fit on one line.
And lyx doesn't break the output on the postscript output.
How can i break this url without hyphenation?
Did you
On Wed, Feb 12, 2003 at 08:55:59AM +0100, [EMAIL PROTECTED] wrote:
I have a little problem for putting url in my document.
I used Insert URL menu to insert URL but as this url is very long it
doesn't fit on one line.
And lyx doesn't break the output on the postscript output.
How can i
On Wed, 12 Feb 2003, Dekel Tsur wrote:
On Wed, Feb 12, 2003 at 08:55:59AM +0100, [EMAIL PROTECTED] wrote:
I have a little problem for putting url in my document.
I used Insert URL menu to insert URL but as this url is very long it
doesn't fit on one line.
And lyx doesn't break the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 11 February 2003 07:56 pm, Praedor Tempus Atrebates wrote:
I created my own reference style for my thesis using makebst. I
specifically selected that journal names should be underlined rather than
italicized but when the reference list
[EMAIL PROTECTED] wrote:
my problem is that i have it but it simply doesn't work.
Try to add \- (or just - ) into the URL window of LyX in the point
where breaking of line is suggested.
Matej
--
Matej Cepl,
Finger: 89EF 4BC6 288A BF43 1BAB 25C3 E09F EF25 D964 84AC
138 Highland Ave. #10,
Michael Jaeger schrieb:
everything works fine, but I've got a list of tables and after this, on the
next page, I've got a list of abbreviations where I chose the chapter*
environment to format the heading List of abbreviations. Now, this list is
two pages long and on the second page the
[EMAIL PROTECTED] schrieb:
On Wed, 12 Feb 2003, Dekel Tsur wrote:
On Wed, Feb 12, 2003 at 08:55:59AM +0100, [EMAIL PROTECTED] wrote:
I have a little problem for putting url in my document.
I used Insert URL menu to insert URL but as this url is very long it
doesn't fit on one line.
And
Christian Ridderström schrieb:
On Wed, 12 Feb 2003, Herbert Voss wrote:
\usepackage{mathptmx}% instead of package times
\usepackage[scaled=0.9]{helvet} % or [scaled=0.92], if you like
Hmm... I just tried this and get the error:
LaTeX Error: Unknown option `scaled=0.9' for package `helvet'.
On Wed, 12 Feb 2003, Herbert Voss wrote:
Christian Ridderström schrieb:
On Wed, 12 Feb 2003, Herbert Voss wrote:
\usepackage{mathptmx}% instead of package times
\usepackage[scaled=0.9]{helvet} % or [scaled=0.92], if you like
Hmm... I just tried this and get the error:
On Wed, 12 Feb 2003, Herbert Voss wrote:
Christian Ridderström schrieb:
On Wed, 12 Feb 2003, Herbert Voss wrote:
\usepackage{mathptmx}% instead of package times
\usepackage[scaled=0.9]{helvet} % or [scaled=0.92], if you like
Hmm... I just tried this and get the error:
On Tue, 2003-02-11 at 22:29, Dekel Tsur wrote:
On Tue, Feb 11, 2003 at 07:29:04PM +0100, Pierrick Mellerin wrote:
Hello,
Lyx-1.3.0-1 is a wonderful program ...
I have a little problem with the displaying of the table of contents in
the screen mode. Accentuated characters (like
I have a bunch of eps graphs that I'd like to annotate with LaTeX
(axis labels, stuff like that). Can anyone give me some pointers to
the best way to go about this?
Regards,
Angus
Christian Ridderström schrieb:
On Wed, 12 Feb 2003, Herbert Voss wrote:
Christian Ridderström schrieb:
On Wed, 12 Feb 2003, Herbert Voss wrote:
\usepackage{mathptmx}% instead of package times
\usepackage[scaled=0.9]{helvet} % or [scaled=0.92], if you like
Hmm... I just tried this and
Christian Ridderström schrieb:
\ProvidesPackage{helvet}
[1999/03/29 PSNFSS v.7.2
update this package
Herbert
--
http://www.educat.hu-berlin.de/~voss/lyx/
On Wed, 12 Feb 2003, Herbert Voss wrote:
Christian Ridderström schrieb:
\ProvidesPackage{helvet}
[1999/03/29 PSNFSS v.7.2
update this package
Herbert
Thanks, I've told my systems administrator and hopefully he'll update the
package.
/Christian
--
Christian Ridderström, +46-8-790
Hi all,
I'm experiencing a problem I hadn't seen with the 1.1.x series, now that I
moved to the 1.3 version. I'm using the lyx.org supplied RedHat 8.0 binaries
with the QT front end.
The problem is that the lyxpipe.in/out files in ~/.lyx/ appear not to be
destroyed when lyx exits:
[~] \rm
I have put the latest xforms on and the spell checker still isnt
working. Has anyone else got this problem?
Owen Lucas wrote:
I have installed lyx 1.3 on my RH7.3 box with xforms xforms-0.89-1
I ame using the british language package for aspell
When using the spell checker the text boxes do not
Hello
I would install Lyx 1.3.0 for Mandrake, but i become the error i can't
found qt 2.2.1 . In the readme-file i have read Lyx needs qt 3.0.5.
What can i do ?
MfG Har
harmel wrote:
I would install Lyx 1.3.0 for Mandrake, but i become the error i can't
found qt 2.2.1 . In the readme-file i have read Lyx needs qt 3.0.5.
What can i do ?
Check which version of Qt you have. If it is less than 2.2.1,
than upgrade. However, do not panick -- I have here very happy
I sew checkingmaple...yes in #./configure results.
How can work Lyx with Maple? It is possible?
Thanks
T.K.
Angus wrote:
I have a bunch of eps graphs that I'd like to annotate with LaTeX
(axis labels, stuff like that). Can anyone give me some pointers to
the best way to go about this?
If your graphs are of the mathematical kind, then check out the pstricks
package and pst-plot. A description is given
Our network services tell us that the network for the whole campus will be
down Feb 23--and perhaps starting the day before.
I'll tell you the exact day when we get closer. In any case, I will use
this time to retire this old server, and move the list to a new one (keep
name, IP, etc).
Hello,
I recently post a message about a problem in screen mode with the displaying
of accentuated characters (french in fact, like à, é, è, ...) in the table
of contents window.
The same thing appears when I paste a text which contain that kind of
characters. Or if I insert an accentuated
Myriam Abramson schrieb:
I get an error when using title in seminar layout.
I'm enclosing a test file. I'm using lyx 1.2.2.
use the title outside of a slide environment
Herbert
--
http://www.educat.hu-berlin.de/~voss/lyx/
Dear LyX Users
Has anyone tried to bring some latexcad-Drawings (*.lp) into LyX? If
there is any experience on this topic out there I would be very
interested on Infomation Exchange
Greetings
Dubrakvo Dolic
Remzi wrote:
>http://www.educat.hu-berlin.de/~voss/lyx/fancy/pagenumsfancyh.lyx
Thanks to Remzi and Matej for your responses. Your solution required
me to define a new pagestyle "myfancy" and to duplicate this by redefining
the plain pagestyle. Thus I deduce that the first page of a chapter is
by
On Tue, Feb 11, 2003 at 07:53:55PM -0500, Praedor Tempus Atrebates wrote:
>
> Thanks. The "fix" was to add \usepackage{pslatex} to the preamble.
Don't add this package manually. You can change the font in the document
dialog.
You can also get "good" PDF without changing the font. Read
Max Bian wrote:
> Sorry. My document is article (Revtex4). There is no lyx-code or
> comment.
>
> Any idea?
>
> Max
> --- I Wayan Warmada <[EMAIL PROTECTED]> wrote:
>
>> put the cursor in the firstline of paragraph, then select in the list
>> "comment [Kommentar, in my LyX]", which is
Angus Leeming sagte:
> Could you not add a Note inset to your document and cut and paste the
> stuff
into it. This has the advantage that all your typesetting is
> preserved,
whereas the comment environment would chew it up.
in preamble \usepackage{comment}
and then
\begin{comment}% in
Andre Poenitz wrote:
> On Wed, Feb 12, 2003 at 05:45:31PM +1100, Hugues Talbot wrote:
>> Anyone experiencing the same problem?
>
> Yes this was reported already. But no solution has emered so far.
> Note that the xforms frontend does not have that particular problem.
Dekel apparently fixed the
[EMAIL PROTECTED] wrote:
> I have a little problem for putting url in my document.
> I used Insert URL menu to insert URL but as this url is very long it
> doesn't fit on one line.
> And lyx doesn't break the output on the postscript output.
>
> How can i break this url without hyphenation?
On Wed, Feb 12, 2003 at 08:55:59AM +0100, [EMAIL PROTECTED] wrote:
>
> I have a little problem for putting url in my document.
> I used Insert URL menu to insert URL but as this url is very long it
> doesn't fit on one line.
> And lyx doesn't break the output on the postscript output.
>
> How
On Wed, 12 Feb 2003, Dekel Tsur wrote:
> On Wed, Feb 12, 2003 at 08:55:59AM +0100, [EMAIL PROTECTED] wrote:
> >
> > I have a little problem for putting url in my document.
> > I used Insert URL menu to insert URL but as this url is very long it
> > doesn't fit on one line.
> > And lyx doesn't
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 11 February 2003 07:56 pm, Praedor Tempus Atrebates wrote:
> I created my own reference style for my thesis using makebst. I
> specifically selected that journal names should be underlined rather than
> italicized but when the reference
[EMAIL PROTECTED] wrote:
> my problem is that i have it but it simply doesn't work.
Try to add \- (or just - ) into the URL window of LyX in the point
where breaking of line is suggested.
Matej
--
Matej Cepl,
Finger: 89EF 4BC6 288A BF43 1BAB 25C3 E09F EF25 D964 84AC
138 Highland Ave. #10,
Michael Jaeger schrieb:
everything works fine, but I've got a list of tables and after this, on the
next page, I've got a list of abbreviations where I chose the chapter*
environment to format the heading "List of abbreviations". Now, this list is
two pages long and on the second page the
[EMAIL PROTECTED] schrieb:
On Wed, 12 Feb 2003, Dekel Tsur wrote:
On Wed, Feb 12, 2003 at 08:55:59AM +0100, [EMAIL PROTECTED] wrote:
I have a little problem for putting url in my document.
I used Insert URL menu to insert URL but as this url is very long it
doesn't fit on one line.
And
Christian Ridderström schrieb:
On Wed, 12 Feb 2003, Herbert Voss wrote:
\usepackage{mathptmx}% instead of package times
\usepackage[scaled=0.9]{helvet} % or [scaled=0.92], if you like
Hmm... I just tried this and get the error:
LaTeX Error: Unknown option `scaled=0.9' for package `helvet'.
On Wed, 12 Feb 2003, Herbert Voss wrote:
> Christian Ridderström schrieb:
> > On Wed, 12 Feb 2003, Herbert Voss wrote:
> >
> >>\usepackage{mathptmx}% instead of package times
> >>\usepackage[scaled=0.9]{helvet} % or [scaled=0.92], if you like
> >>
> >
> > Hmm... I just tried this and get the
On Wed, 12 Feb 2003, Herbert Voss wrote:
> Christian Ridderström schrieb:
> > On Wed, 12 Feb 2003, Herbert Voss wrote:
> >
> >>\usepackage{mathptmx}% instead of package times
> >>\usepackage[scaled=0.9]{helvet} % or [scaled=0.92], if you like
> >>
> >
> > Hmm... I just tried this and get the
On Tue, 2003-02-11 at 22:29, Dekel Tsur wrote:
> On Tue, Feb 11, 2003 at 07:29:04PM +0100, Pierrick Mellerin wrote:
> > Hello,
> >
> > Lyx-1.3.0-1 is a wonderful program ...
> >
> > I have a little problem with the displaying of the table of contents in
> > the screen mode. Accentuated
I have a bunch of eps graphs that I'd like to annotate with LaTeX
(axis labels, stuff like that). Can anyone give me some pointers to
the best way to go about this?
Regards,
Angus
Christian Ridderström schrieb:
On Wed, 12 Feb 2003, Herbert Voss wrote:
Christian Ridderström schrieb:
On Wed, 12 Feb 2003, Herbert Voss wrote:
\usepackage{mathptmx}% instead of package times
\usepackage[scaled=0.9]{helvet} % or [scaled=0.92], if you like
Hmm... I just tried this and
Christian Ridderström schrieb:
\ProvidesPackage{helvet}
[1999/03/29 PSNFSS v.7.2
update this package
Herbert
--
http://www.educat.hu-berlin.de/~voss/lyx/
On Wed, 12 Feb 2003, Herbert Voss wrote:
> Christian Ridderström schrieb:
> > \ProvidesPackage{helvet}
> > [1999/03/29 PSNFSS v.7.2
>
> update this package
>
> Herbert
Thanks, I've told my systems administrator and hopefully he'll update the
package.
/Christian
--
Christian Ridderström,
Hi all,
I'm experiencing a problem I hadn't seen with the 1.1.x series, now that I
moved to the 1.3 version. I'm using the lyx.org supplied RedHat 8.0 binaries
with the QT front end.
The problem is that the lyxpipe.in/out files in ~/.lyx/ appear not to be
destroyed when lyx exits:
[~]> \rm
I have put the latest xforms on and the spell checker still isnt
working. Has anyone else got this problem?
Owen Lucas wrote:
I have installed lyx 1.3 on my RH7.3 box with xforms xforms-0.89-1
I ame using the british language package for aspell
When using the spell checker the text boxes do not
Hello
I would install Lyx 1.3.0 for Mandrake, but i become the error "i can't
found qt 2.2.1" . In the readme-file i have read Lyx needs qt 3.0.5.
What can i do ?
MfG Har
harmel wrote:
> I would install Lyx 1.3.0 for Mandrake, but i become the error "i can't
> found qt 2.2.1" . In the readme-file i have read Lyx needs qt 3.0.5.
> What can i do ?
Check which version of Qt you have. If it is less than 2.2.1,
than upgrade. However, do not panick -- I have here very
I sew "checkingmaple...yes" in #./configure results.
How can work Lyx with Maple? It is possible?
Thanks
T.K.
Angus wrote:
>I have a bunch of eps graphs that I'd like to annotate with LaTeX
>(axis labels, stuff like that). Can anyone give me some pointers to
>the best way to go about this?
If your graphs are of the mathematical kind, then check out the pstricks
package and pst-plot. A description is
Our network services tell us that the network for the whole campus will be
down Feb 23--and perhaps starting the day before.
I'll tell you the exact day when we get closer. In any case, I will use
this time to retire this old server, and move the list to a new one (keep
name, IP, etc).
90 matches
Mail list logo
