There does not appear to be a space when it is viewed as you suggest.
Have constructed a minimal example and attached both .lyx file .pdf
file and .xls file .
Alasdair
On Tue, 3 Apr 2012 14:50:05 + (UTC)
Paul A. Rubin ru...@msu.edu wrote:
You seem to have an errant space at the start of
Dear List
Is it possible to write (with Lyx) a circular letter with an arbitrary letter
pattern?
Best regards
Joerg
--
Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir
belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de
I would like to reduce the staff-size of the lilypond output and using #(set-
global-staff-size 16) in the lilypond code doesn't work so I guess I need to
change the lilypond-book options [staffsize=16] but I can't seem to do it from
within Lyx.
Ok, one moment it worked fine and the other I get this notice that the
lilypond-book --safe etc. command produced an error.
At first I thought it had something to do with the recent installation of
lilypond 2.15.35 so I tried reinstalling it but to no avail.
Then I tried to just use my laptop
Hallo Liste
Ist es möglich aus jeder beliebigen Lyx-Brief-Vorlage einen Serienbrief zu
machen?
Gruss Jörg
--
Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir
belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de
On 04/03/2012 09:55 PM, Hannu Vuolasaho wrote:
Hi!
I'm writing KOMA report class document and it behaves weird. In Lyx I have Part
N and in pdf I get part in Finnish as expected. This is acceptable even I was
curious if it would translate.
Now I have source code listing. The caption of source
On 04/04/2012 07:50 AM, Neal Becker wrote:
I have a pdf included using the option 'page=xxx'. The output pdf file is
correct, but the lyx preview is showing pg 1 (even though I selected pg 2).
Please file this as an enhancement request. I don't think the LyX
preview picks up your customized
On 04/04/2012 7:52 AM, Tao Cumplido wrote:
Ok, one moment it worked fine and the other I get this notice that the
lilypond-book --safe etc. command produced an error.
At first I thought it had something to do with the recent installation of
lilypond 2.15.35 so I tried reinstalling it but to no
On 04/04/2012 5:58 AM, Tao Cumplido wrote:
I would like to reduce the staff-size of the lilypond output and using #(set-
global-staff-size 16) in the lilypond code doesn't work so I guess I need to
change the lilypond-book options [staffsize=16] but I can't seem to do it from
within Lyx.
You
Julien Rioux jrioux at physics.utoronto.ca writes:
Is there anything else in View View Messages that might be useful in
debugging?
As far as I remember no, but I'll try again as soon as I can and post the whole
log.
You may also add the command option --loglevel=DEBUG to the
Julien Rioux jrioux at physics.utoronto.ca writes:
You could make your own customized version of the lilypond.module file.
See Help Customization, especially read about LatexParam under Section
5.3.9 Flex insets and InsetLayout. So basically copying lilypond.module
to your user
I often have lots of code inside ERT, for example in knitr code. How can I
do to make the font size small in the ERT. I know I can ctrl+ zoom out to
make everything small but I would like to make only ERT small. Any ideas?
On 4/4/12 9:18 PM, Xu Wang wrote:
I often have lots of code inside ERT, for example in knitr code. How
can I do to make the font size small in the ERT. I know I can ctrl+
zoom out to make everything small but I would like to make only ERT
small. Any ideas?
In your local layout, something
Thank you very much Richard.
On Wed, Apr 4, 2012 at 9:36 PM, Richard Heck rgh...@comcast.net wrote:
On 4/4/12 9:18 PM, Xu Wang wrote:
I often have lots of code inside ERT, for example in knitr code. How can
I do to make the font size small in the ERT. I know I can ctrl+ zoom out to
make
There does not appear to be a space when it is viewed as you suggest.
Have constructed a minimal example and attached both .lyx file .pdf
file and .xls file .
Alasdair
On Tue, 3 Apr 2012 14:50:05 + (UTC)
Paul A. Rubin ru...@msu.edu wrote:
You seem to have an errant space at the start of
Dear List
Is it possible to write (with Lyx) a circular letter with an arbitrary letter
pattern?
Best regards
Joerg
--
Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir
belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de
I would like to reduce the staff-size of the lilypond output and using #(set-
global-staff-size 16) in the lilypond code doesn't work so I guess I need to
change the lilypond-book options [staffsize=16] but I can't seem to do it from
within Lyx.
Ok, one moment it worked fine and the other I get this notice that the
lilypond-book --safe etc. command produced an error.
At first I thought it had something to do with the recent installation of
lilypond 2.15.35 so I tried reinstalling it but to no avail.
Then I tried to just use my laptop
Hallo Liste
Ist es möglich aus jeder beliebigen Lyx-Brief-Vorlage einen Serienbrief zu
machen?
Gruss Jörg
--
Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir
belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de
On 04/03/2012 09:55 PM, Hannu Vuolasaho wrote:
Hi!
I'm writing KOMA report class document and it behaves weird. In Lyx I have Part
N and in pdf I get part in Finnish as expected. This is acceptable even I was
curious if it would translate.
Now I have source code listing. The caption of source
On 04/04/2012 07:50 AM, Neal Becker wrote:
I have a pdf included using the option 'page=xxx'. The output pdf file is
correct, but the lyx preview is showing pg 1 (even though I selected pg 2).
Please file this as an enhancement request. I don't think the LyX
preview picks up your customized
On 04/04/2012 7:52 AM, Tao Cumplido wrote:
Ok, one moment it worked fine and the other I get this notice that the
lilypond-book --safe etc. command produced an error.
At first I thought it had something to do with the recent installation of
lilypond 2.15.35 so I tried reinstalling it but to no
On 04/04/2012 5:58 AM, Tao Cumplido wrote:
I would like to reduce the staff-size of the lilypond output and using #(set-
global-staff-size 16) in the lilypond code doesn't work so I guess I need to
change the lilypond-book options [staffsize=16] but I can't seem to do it from
within Lyx.
You
Julien Rioux jrioux at physics.utoronto.ca writes:
Is there anything else in View View Messages that might be useful in
debugging?
As far as I remember no, but I'll try again as soon as I can and post the whole
log.
You may also add the command option --loglevel=DEBUG to the
Julien Rioux jrioux at physics.utoronto.ca writes:
You could make your own customized version of the lilypond.module file.
See Help Customization, especially read about LatexParam under Section
5.3.9 Flex insets and InsetLayout. So basically copying lilypond.module
to your user
I often have lots of code inside ERT, for example in knitr code. How can I
do to make the font size small in the ERT. I know I can ctrl+ zoom out to
make everything small but I would like to make only ERT small. Any ideas?
On 4/4/12 9:18 PM, Xu Wang wrote:
I often have lots of code inside ERT, for example in knitr code. How
can I do to make the font size small in the ERT. I know I can ctrl+
zoom out to make everything small but I would like to make only ERT
small. Any ideas?
In your local layout, something
Thank you very much Richard.
On Wed, Apr 4, 2012 at 9:36 PM, Richard Heck rgh...@comcast.net wrote:
On 4/4/12 9:18 PM, Xu Wang wrote:
I often have lots of code inside ERT, for example in knitr code. How can
I do to make the font size small in the ERT. I know I can ctrl+ zoom out to
make
There does not appear to be a space when it is viewed as you suggest.
Have constructed a minimal example and attached both .lyx file .pdf
file and .xls file .
Alasdair
On Tue, 3 Apr 2012 14:50:05 + (UTC)
Paul A. Rubin wrote:
> You seem to have an errant space at the start of
Dear List
Is it possible to write (with Lyx) a circular letter with an arbitrary letter
pattern?
Best regards
Joerg
--
Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir
belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de
I would like to reduce the staff-size of the lilypond output and using #(set-
global-staff-size 16) in the lilypond code doesn't work so I guess I need to
change the lilypond-book options [staffsize=16] but I can't seem to do it from
within Lyx.
Ok, one moment it worked fine and the other I get this notice that the
lilypond-book --safe etc. command produced an error.
At first I thought it had something to do with the recent installation of
lilypond 2.15.35 so I tried reinstalling it but to no avail.
Then I tried to just use my laptop
Hallo Liste
Ist es möglich aus jeder beliebigen Lyx-Brief-Vorlage einen Serienbrief zu
machen?
Gruss Jörg
--
Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir
belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de
On 04/03/2012 09:55 PM, Hannu Vuolasaho wrote:
Hi!
I'm writing KOMA report class document and it behaves weird. In Lyx I have Part
N and in pdf I get part in Finnish as expected. This is acceptable even I was
curious if it would translate.
Now I have source code listing. The caption of source
On 04/04/2012 07:50 AM, Neal Becker wrote:
I have a pdf included using the option 'page=xxx'. The output pdf file is
correct, but the lyx preview is showing pg 1 (even though I selected pg 2).
Please file this as an enhancement request. I don't think the LyX
preview picks up your customized
On 04/04/2012 7:52 AM, Tao Cumplido wrote:
Ok, one moment it worked fine and the other I get this notice that the
lilypond-book --safe etc. command produced an error.
At first I thought it had something to do with the recent installation of
lilypond 2.15.35 so I tried reinstalling it but to no
On 04/04/2012 5:58 AM, Tao Cumplido wrote:
I would like to reduce the staff-size of the lilypond output and using #(set-
global-staff-size 16) in the lilypond code doesn't work so I guess I need to
change the lilypond-book options [staffsize=16] but I can't seem to do it from
within Lyx.
You
Julien Rioux physics.utoronto.ca> writes:
>
> Is there anything else in View > View Messages that might be useful in
> debugging?
As far as I remember no, but I'll try again as soon as I can and post the whole
log.
> You may also add the command option "--loglevel=DEBUG" to the
>
Julien Rioux physics.utoronto.ca> writes:
>
> You could make your own customized version of the lilypond.module file.
> See Help > Customization, especially read about LatexParam under Section
> 5.3.9 Flex insets and InsetLayout. So basically copying lilypond.module
> to your user directory
I often have lots of code inside ERT, for example in knitr code. How can I
do to make the font size small in the ERT. I know I can ctrl+ zoom out to
make everything small but I would like to make only ERT small. Any ideas?
On 4/4/12 9:18 PM, Xu Wang wrote:
I often have lots of code inside ERT, for example in knitr code. How
can I do to make the font size small in the ERT. I know I can ctrl+
zoom out to make everything small but I would like to make only ERT
small. Any ideas?
In your local layout, something
Thank you very much Richard.
On Wed, Apr 4, 2012 at 9:36 PM, Richard Heck wrote:
> On 4/4/12 9:18 PM, Xu Wang wrote:
>
>> I often have lots of code inside ERT, for example in knitr code. How can
>> I do to make the font size small in the ERT. I know I can ctrl+ zoom out to
42 matches
Mail list logo