On Mon, 27 Sep 1999, [iso-8859-1] Juan Luis Freniche Ibañez wrote:
[...]
I can't move the bibliography to the very end of the document (I'm using
templates or model texts). In fact, I need several separate bibliographies, as
in the following:
[...]
But this is working correctly in the LATeX,
I am attempting to use the "comment paragraph environment" in LyX
v1.0.3. I cannot find a menu pulldown for this feature. More importantly
the M-p S-C key-sequence only gives a "Layout comment not known" error in
the minibuffer. My documentclass is "Article (Revtex)". Does anybody know
Hello there,
I'm using LyX 1.04
I use xemacs to create and update my bibtex bibliography,
But i have some probleme, when updating the bibliography via xemacs, the
next compilation under lyx does not take into account the modification,
i would like to regenerate the bibliography in fact
Richard Palfalvi wrote:
I have to restart a bit this discussion again as I am having the same
problems with my netscape (4.5) mail-programm. The "funny" thing is that
with the following entries in the message filters list filtering mails
from the lyx-users-list SOMETIMES WORKS and sometimes
I had this problem when building from the tar.gz, and found the
quickest solution was to extract lyx.xpm from the archive and place it
in the directory RPM was complaining it couldnt find it in (in my case,
the redhat/SOURCES directory.
worked fine. I suspect the RPM spec file in the archive is
On 30-Sep-99 Panagiotis Melas wrote:
Hello,
Is it possible to use a footnote in a table which is used as a float?
I hope you know how to use footnotes in (normal) tabulars (otherwise
have a look at the example files), for a float I would put the tabular
in a minipage (have a look at he
"Allan" == Allan Rae [EMAIL PROTECTED] writes:
Allan On Mon, 27 Sep 1999, [iso-8859-1] Juan Luis Freniche Ibañez
Allan wrote: [...]
I can't move the bibliography to the very end of the document (I'm
using templates or model texts). In fact, I need several separate
bibliographies, as in the
On 30-Sep-99 Darek Kedra wrote:
Dear Juergen,
Thanks for your help, everything works as you wrote ;-).
is it possible to get similar effect (large font not touching the lines)
in tables with non-fixed cells width?
If the whole tabular uses large fonts than probably you can put in
the
"Kayvan A. Sylvan" wrote:
On Thu, Sep 30, 1999 at 11:52:10PM +0200, Tobias Klaus wrote:
Hi,
I just tried to rpm -tb lyx-1.0.4.tar.gz for Suse6.2, and I got the
following message:
Unable to stat icon: /xxx/xxx/lyx.xpm
Any ideas how to do it such that it works?
Huh. I had no
On Fri, 1 Oct 1999, Tony Dancer wrote:
I had this problem when building from the tar.gz, and found the
quickest solution was to extract lyx.xpm from the archive and place it
in the directory RPM was complaining it couldnt find it in (in my case,
the redhat/SOURCES directory.
worked fine. I
Hi,
it's possible to obtain a 'varepsilon' symbol in diversity size
in a math formula. eg large.
I know that it possible to have a bold symbol, with
\boldsymbol{\varepsilon}.
thank you,
Riccardo Varotto
hi,
it's possible to insert the biography entry in the main
table of index?
thank you
Riccardo Varotto
"Torsten" == Torsten Mueller [EMAIL PROTECTED] writes:
I am attempting to use the "comment paragraph environment" in LyX
v1.0.3. I cannot find a menu pulldown for this feature. More
importantly the M-p S-C key-sequence only gives a "Layout comment
not known" error in the minibuffer. My
"Leonid" == Leonid Belostotski [EMAIL PROTECTED] writes:
Leonid Hello, I'm preparing a bibliography using BibTex. I ran in to
Leonid a problem though. When I produce .DVI file the following error
Leonid message appears:
Leonid Your field is more than 5000 characters---line 471 of file
Leonid
Jean-Pierre.Chretien wrote:
I suppose LyX doesn't check the time stamp of the bib files.
Seems to me that editing the Biblio refrences popu menu (say, add e letter
and remove it) calls the BibTeX run, you may check that.
Otherwise quit LyX and restart works, bu is a bit tiresome.
the tip
On Fri, Oct 01, 1999 at 12:31:03PM +0200, Jean-Pierre.Chretien wrote:
I suppose LyX doesn't check the time stamp of the bib files.
Seems to me that editing the Biblio refrences popu menu (say, add e letter
and remove it) calls the BibTeX run, you may check that.
Otherwise quit LyX and
On Fri, 1 Oct 1999, Richard Palfalvi wrote:
an I turned on "Match all of the following"
Try "Match any of the following"
Ciao!
juh
--
juh's Sudelbuch
Literatur und Satire per E-Mail
http://www.sudelbuch.de
On Fri, 1 Oct 1999, Tobias Klaus wrote:
You can try rebuilding my rpm from the src.rpm file:
since I'm pretty newbie, could you tell me how to rpm a binary from the
rpm source?
Look in ftp://ftp.sylvan.com/pub/lyx/ for the lyx-1.0.4-1.src.rpm file.
Read the rpm manpage. The basic
Thanks, I tried using the src.rpm as well as extracting the xpm and
putting it in the respective directory. Both give me the following
message:
Configuration:
Source code location: .
Compiler: g++
Compiler flags: -O2 -m486 -fno-strength-reduce
LyX
Hi!
On 30-Sep-99 Jean-Marc Lasgouttes wrote:
If you are using the book class, you can add (marked as TeX)
\frontmatter at the beginning of the document,
\mainmatter at the beginning of the main part
\backmatter at the end of the main part.
Now, I know this question comes up a lot
Jose Abilio Oliveira Matos [EMAIL PROTECTED] writes:
| On Fri, Oct 01, 1999 at 12:31:03PM +0200, Jean-Pierre.Chretien wrote:
|
| I suppose LyX doesn't check the time stamp of the bib files.
| Seems to me that editing the Biblio refrences popu menu (say, add e letter
| and remove it) calls
To: [EMAIL PROTECTED]
Subject: Re: How to force LyX to make the all compilation
From: [EMAIL PROTECTED] (Lars Gullik Bjønnes)
Date: 01 Oct 1999 16:53:42 +0200
Jose Abilio Oliveira Matos [EMAIL PROTECTED] writes:
| On Fri, Oct 01, 1999 at 12:31:03PM +0200, Jean-Pierre.Chretien wrote:
|
| I
Jean-Marc Lasgouttes [EMAIL PROTECTED] writes:
| "Lars" == Lars Gullik Bjønnes [EMAIL PROTECTED] writes:
|
| Lars I am not sure how to to a proper fix. To do it we need to know
| Lars the absolute path to the bib file in questions, if we can have
| Lars that the problem is solved. But how to
subscribe
John Deacon| UCL Starlink Site Manager
Dept Physics and Astronomy | Email: [EMAIL PROTECTED]
University College London | Tel: 0171-380 7147
Gower Street
"Jean-Pierre.Chretien" [EMAIL PROTECTED] writes:
| With a kpathsea search tree texmf install, kpsewhich can do it, but I suppose
| that such a distribution-specific solution is not suitable...
I perfect solution is of course best, but if we have to we can do with
less.
We should probably have
You need to install libXpm and the respective Xpm header files.
On my Linux system, they are the xpm-3.4j-5 and xpm-devel-3.4j-5
packages.
On Fri, Oct 01, 1999 at 03:19:52PM +0200, Tobias Klaus wrote:
Thanks, I tried using the src.rpm as well as extracting the xpm and
putting it in the
On Fri, Oct 01, 1999 at 09:14:06AM +0200, Yann MORERE wrote:
But i have some probleme, when updating the bibliography via xemacs, the
next compilation under lyx does not take into account the modification,
i would like to regenerate the bibliography in fact relaunching the 3
compilation
I am running LyX 1.03, and I see on the web page that DocBook support
was added in this release, yet I can't find any mention of it in the
manuals or in the program. Can someone tell me where the DocBook
support is?
--
Bruce Momjian| http://www.op.net/~candle
I now see the DocBook support is only in 1.04. Sorry for the stupid
question.
--
Bruce Momjian| http://www.op.net/~candle
[EMAIL PROTECTED]| (610) 853-3000
+ If your life is a hard drive, | 830 Blythe Avenue
+ Christ can be your backup.
On Mon, 27 Sep 1999, [iso-8859-1] Juan Luis Freniche Ibañez wrote:
[...]
I can't move the bibliography to the very end of the document (I'm using
templates or model texts). In fact, I need several separate bibliographies, as
in the following:
[...]
But this is working correctly in the LATeX,
I am attempting to use the "comment paragraph environment" in LyX
v1.0.3. I cannot find a menu pulldown for this feature. More importantly
the M-p S-C key-sequence only gives a "Layout comment not known" error in
the minibuffer. My documentclass is "Article (Revtex)". Does anybody know
Hello there,
I'm using LyX 1.04
I use xemacs to create and update my bibtex bibliography,
But i have some probleme, when updating the bibliography via xemacs, the
next compilation under lyx does not take into account the modification,
i would like to regenerate the bibliography in fact
Richard Palfalvi wrote:
I have to restart a bit this discussion again as I am having the same
problems with my netscape (4.5) mail-programm. The "funny" thing is that
with the following entries in the message filters list filtering mails
from the lyx-users-list SOMETIMES WORKS and sometimes
I had this problem when building from the tar.gz, and found the
quickest solution was to extract lyx.xpm from the archive and place it
in the directory RPM was complaining it couldnt find it in (in my case,
the redhat/SOURCES directory.
worked fine. I suspect the RPM spec file in the archive is
On 30-Sep-99 Panagiotis Melas wrote:
Hello,
Is it possible to use a footnote in a table which is used as a float?
I hope you know how to use footnotes in (normal) tabulars (otherwise
have a look at the example files), for a float I would put the tabular
in a minipage (have a look at he
"Allan" == Allan Rae [EMAIL PROTECTED] writes:
Allan On Mon, 27 Sep 1999, [iso-8859-1] Juan Luis Freniche Ibañez
Allan wrote: [...]
I can't move the bibliography to the very end of the document (I'm
using templates or model texts). In fact, I need several separate
bibliographies, as in the
On 30-Sep-99 Darek Kedra wrote:
Dear Juergen,
Thanks for your help, everything works as you wrote ;-).
is it possible to get similar effect (large font not touching the lines)
in tables with non-fixed cells width?
If the whole tabular uses large fonts than probably you can put in
the
"Kayvan A. Sylvan" wrote:
On Thu, Sep 30, 1999 at 11:52:10PM +0200, Tobias Klaus wrote:
Hi,
I just tried to rpm -tb lyx-1.0.4.tar.gz for Suse6.2, and I got the
following message:
Unable to stat icon: /xxx/xxx/lyx.xpm
Any ideas how to do it such that it works?
Huh. I had no
On Fri, 1 Oct 1999, Tony Dancer wrote:
I had this problem when building from the tar.gz, and found the
quickest solution was to extract lyx.xpm from the archive and place it
in the directory RPM was complaining it couldnt find it in (in my case,
the redhat/SOURCES directory.
worked fine. I
Hi,
it's possible to obtain a 'varepsilon' symbol in diversity size
in a math formula. eg large.
I know that it possible to have a bold symbol, with
\boldsymbol{\varepsilon}.
thank you,
Riccardo Varotto
hi,
it's possible to insert the biography entry in the main
table of index?
thank you
Riccardo Varotto
"Torsten" == Torsten Mueller [EMAIL PROTECTED] writes:
I am attempting to use the "comment paragraph environment" in LyX
v1.0.3. I cannot find a menu pulldown for this feature. More
importantly the M-p S-C key-sequence only gives a "Layout comment
not known" error in the minibuffer. My
"Leonid" == Leonid Belostotski [EMAIL PROTECTED] writes:
Leonid Hello, I'm preparing a bibliography using BibTex. I ran in to
Leonid a problem though. When I produce .DVI file the following error
Leonid message appears:
Leonid Your field is more than 5000 characters---line 471 of file
Leonid
Jean-Pierre.Chretien wrote:
I suppose LyX doesn't check the time stamp of the bib files.
Seems to me that editing the Biblio refrences popu menu (say, add e letter
and remove it) calls the BibTeX run, you may check that.
Otherwise quit LyX and restart works, bu is a bit tiresome.
the tip
On Fri, Oct 01, 1999 at 12:31:03PM +0200, Jean-Pierre.Chretien wrote:
I suppose LyX doesn't check the time stamp of the bib files.
Seems to me that editing the Biblio refrences popu menu (say, add e letter
and remove it) calls the BibTeX run, you may check that.
Otherwise quit LyX and
On Fri, 1 Oct 1999, Richard Palfalvi wrote:
an I turned on "Match all of the following"
Try "Match any of the following"
Ciao!
juh
--
juh's Sudelbuch
Literatur und Satire per E-Mail
http://www.sudelbuch.de
On Fri, 1 Oct 1999, Tobias Klaus wrote:
You can try rebuilding my rpm from the src.rpm file:
since I'm pretty newbie, could you tell me how to rpm a binary from the
rpm source?
Look in ftp://ftp.sylvan.com/pub/lyx/ for the lyx-1.0.4-1.src.rpm file.
Read the rpm manpage. The basic
Thanks, I tried using the src.rpm as well as extracting the xpm and
putting it in the respective directory. Both give me the following
message:
Configuration:
Source code location: .
Compiler: g++
Compiler flags: -O2 -m486 -fno-strength-reduce
LyX
Hi!
On 30-Sep-99 Jean-Marc Lasgouttes wrote:
If you are using the book class, you can add (marked as TeX)
\frontmatter at the beginning of the document,
\mainmatter at the beginning of the main part
\backmatter at the end of the main part.
Now, I know this question comes up a lot
Jose Abilio Oliveira Matos [EMAIL PROTECTED] writes:
| On Fri, Oct 01, 1999 at 12:31:03PM +0200, Jean-Pierre.Chretien wrote:
|
| I suppose LyX doesn't check the time stamp of the bib files.
| Seems to me that editing the Biblio refrences popu menu (say, add e letter
| and remove it) calls
To: [EMAIL PROTECTED]
Subject: Re: How to force LyX to make the all compilation
From: [EMAIL PROTECTED] (Lars Gullik Bjønnes)
Date: 01 Oct 1999 16:53:42 +0200
Jose Abilio Oliveira Matos [EMAIL PROTECTED] writes:
| On Fri, Oct 01, 1999 at 12:31:03PM +0200, Jean-Pierre.Chretien wrote:
|
| I
Jean-Marc Lasgouttes [EMAIL PROTECTED] writes:
| "Lars" == Lars Gullik Bjønnes [EMAIL PROTECTED] writes:
|
| Lars I am not sure how to to a proper fix. To do it we need to know
| Lars the absolute path to the bib file in questions, if we can have
| Lars that the problem is solved. But how to
subscribe
John Deacon| UCL Starlink Site Manager
Dept Physics and Astronomy | Email: [EMAIL PROTECTED]
University College London | Tel: 0171-380 7147
Gower Street
"Jean-Pierre.Chretien" [EMAIL PROTECTED] writes:
| With a kpathsea search tree texmf install, kpsewhich can do it, but I suppose
| that such a distribution-specific solution is not suitable...
I perfect solution is of course best, but if we have to we can do with
less.
We should probably have
You need to install libXpm and the respective Xpm header files.
On my Linux system, they are the xpm-3.4j-5 and xpm-devel-3.4j-5
packages.
On Fri, Oct 01, 1999 at 03:19:52PM +0200, Tobias Klaus wrote:
Thanks, I tried using the src.rpm as well as extracting the xpm and
putting it in the
On Fri, Oct 01, 1999 at 09:14:06AM +0200, Yann MORERE wrote:
But i have some probleme, when updating the bibliography via xemacs, the
next compilation under lyx does not take into account the modification,
i would like to regenerate the bibliography in fact relaunching the 3
compilation
I am running LyX 1.03, and I see on the web page that DocBook support
was added in this release, yet I can't find any mention of it in the
manuals or in the program. Can someone tell me where the DocBook
support is?
--
Bruce Momjian| http://www.op.net/~candle
I now see the DocBook support is only in 1.04. Sorry for the stupid
question.
--
Bruce Momjian| http://www.op.net/~candle
[EMAIL PROTECTED]| (610) 853-3000
+ If your life is a hard drive, | 830 Blythe Avenue
+ Christ can be your backup.
On Mon, 27 Sep 1999, [iso-8859-1] Juan Luis Freniche Ibañez wrote:
[...]
> I can't move the bibliography to the very end of the document (I'm using
> templates or model texts). In fact, I need several separate bibliographies, as
> in the following:
[...]
> But this is working correctly in the
> I am attempting to use the "comment paragraph environment" in LyX
> v1.0.3. I cannot find a menu pulldown for this feature. More importantly
> the M-p S-C key-sequence only gives a "Layout comment not known" error in
> the minibuffer. My documentclass is "Article (Revtex)". Does anybody
Hello there,
I'm using LyX 1.04
I use xemacs to create and update my bibtex bibliography,
But i have some probleme, when updating the bibliography via xemacs, the
next compilation under lyx does not take into account the modification,
i would like to regenerate the bibliography in fact
Richard Palfalvi wrote:
> I have to restart a bit this discussion again as I am having the same
> problems with my netscape (4.5) mail-programm. The "funny" thing is that
> with the following entries in the message filters list filtering mails
> from the lyx-users-list SOMETIMES WORKS and
I had this problem when building from the tar.gz, and found the
quickest solution was to extract lyx.xpm from the archive and place it
in the directory RPM was complaining it couldnt find it in (in my case,
the redhat/SOURCES directory.
worked fine. I suspect the RPM spec file in the archive is
On 30-Sep-99 Panagiotis Melas wrote:
> Hello,
>
> Is it possible to use a footnote in a table which is used as a float?
>
I hope you know how to use footnotes in (normal) tabulars (otherwise
have a look at the example files), for a float I would put the tabular
in a minipage (have a look at
> "Allan" == Allan Rae <[EMAIL PROTECTED]> writes:
Allan> On Mon, 27 Sep 1999, [iso-8859-1] Juan Luis Freniche Ibañez
Allan> wrote: [...]
>> I can't move the bibliography to the very end of the document (I'm
>> using templates or model texts). In fact, I need several separate
>>
On 30-Sep-99 Darek Kedra wrote:
> Dear Juergen,
>
> Thanks for your help, everything works as you wrote ;-).
> is it possible to get similar effect (large font not touching the lines)
> in tables with non-fixed cells width?
>
If the whole tabular uses large fonts than probably you can put in
"Kayvan A. Sylvan" wrote:
>
> On Thu, Sep 30, 1999 at 11:52:10PM +0200, Tobias Klaus wrote:
> > Hi,
> >
> > I just tried to rpm -tb lyx-1.0.4.tar.gz for Suse6.2, and I got the
> > following message:
> > Unable to stat icon: /xxx/xxx/lyx.xpm
> > Any ideas how to do it such that it works?
>
>
On Fri, 1 Oct 1999, Tony Dancer wrote:
>I had this problem when building from the tar.gz, and found the
>quickest solution was to extract lyx.xpm from the archive and place it
>in the directory RPM was complaining it couldnt find it in (in my case,
>the redhat/SOURCES directory.
>
>worked fine.
Hi,
it's possible to obtain a 'varepsilon' symbol in diversity size
in a math formula. eg large.
I know that it possible to have a bold symbol, with
\boldsymbol{\varepsilon}.
thank you,
Riccardo Varotto
hi,
it's possible to insert the biography entry in the main
table of index?
thank you
Riccardo Varotto
> "Torsten" == Torsten Mueller <[EMAIL PROTECTED]> writes:
>> I am attempting to use the "comment paragraph environment" in LyX
>> v1.0.3. I cannot find a menu pulldown for this feature. More
>> importantly the M-p S-C key-sequence only gives a "Layout comment
>> not known" error in the
> "Leonid" == Leonid Belostotski <[EMAIL PROTECTED]> writes:
Leonid> Hello, I'm preparing a bibliography using BibTex. I ran in to
Leonid> a problem though. When I produce .DVI file the following error
Leonid> message appears:
Leonid> Your field is more than 5000 characters---line 471 of
Jean-Pierre.Chretien wrote:
>
>
> I suppose LyX doesn't check the time stamp of the bib files.
> Seems to me that editing the Biblio refrences popu menu (say, add e letter
> and remove it) calls the BibTeX run, you may check that.
> Otherwise quit LyX and restart works, bu is a bit tiresome.
On Fri, Oct 01, 1999 at 12:31:03PM +0200, Jean-Pierre.Chretien wrote:
>
> I suppose LyX doesn't check the time stamp of the bib files.
> Seems to me that editing the Biblio refrences popu menu (say, add e letter
> and remove it) calls the BibTeX run, you may check that.
> Otherwise quit LyX and
On Fri, 1 Oct 1999, Richard Palfalvi wrote:
>an I turned on "Match all of the following"
Try "Match any of the following"
Ciao!
juh
--
juh's Sudelbuch
Literatur und Satire per E-Mail
http://www.sudelbuch.de
On Fri, 1 Oct 1999, Tobias Klaus wrote:
>> You can try rebuilding my rpm from the src.rpm file:
>
>since I'm pretty newbie, could you tell me how to rpm a binary from the
>rpm source?
>> Look in ftp://ftp.sylvan.com/pub/lyx/ for the lyx-1.0.4-1.src.rpm file.
Read the rpm manpage. The
Thanks, I tried using the src.rpm as well as extracting the xpm and
putting it in the respective directory. Both give me the following
message:
Configuration:
Source code location: .
Compiler: g++
Compiler flags: -O2 -m486 -fno-strength-reduce
LyX
Hi!
On 30-Sep-99 Jean-Marc Lasgouttes wrote:
> If you are using the book class, you can add (marked as TeX)
> \frontmatter at the beginning of the document,
> \mainmatter at the beginning of the main part
> \backmatter at the end of the main part.
Now, I know this question comes up a
Jose Abilio Oliveira Matos <[EMAIL PROTECTED]> writes:
| On Fri, Oct 01, 1999 at 12:31:03PM +0200, Jean-Pierre.Chretien wrote:
| >
| > I suppose LyX doesn't check the time stamp of the bib files.
| > Seems to me that editing the Biblio refrences popu menu (say, add e letter
| > and remove it)
>>To: [EMAIL PROTECTED]
>>Subject: Re: How to force LyX to make the all compilation
>>From: [EMAIL PROTECTED] (Lars Gullik Bjønnes)
>>Date: 01 Oct 1999 16:53:42 +0200
>>
>>Jose Abilio Oliveira Matos <[EMAIL PROTECTED]> writes:
>>
>>| On Fri, Oct 01, 1999 at 12:31:03PM +0200, Jean-Pierre.Chretien
Jean-Marc Lasgouttes <[EMAIL PROTECTED]> writes:
| > "Lars" == Lars Gullik Bjønnes <[EMAIL PROTECTED]> writes:
|
| Lars> I am not sure how to to a proper fix. To do it we need to know
| Lars> the absolute path to the bib file in questions, if we can have
| Lars> that the problem is solved.
subscribe
John Deacon| UCL Starlink Site Manager
Dept Physics and Astronomy | Email: [EMAIL PROTECTED]
University College London | Tel: 0171-380 7147
Gower Street
"Jean-Pierre.Chretien" <[EMAIL PROTECTED]> writes:
| With a kpathsea search tree texmf install, kpsewhich can do it, but I suppose
| that such a distribution-specific solution is not suitable...
I perfect solution is of course best, but if we have to we can do with
less.
We should probably
You need to install libXpm and the respective Xpm header files.
On my Linux system, they are the xpm-3.4j-5 and xpm-devel-3.4j-5
packages.
On Fri, Oct 01, 1999 at 03:19:52PM +0200, Tobias Klaus wrote:
> Thanks, I tried using the src.rpm as well as extracting the xpm and
> putting it in the
On Fri, Oct 01, 1999 at 09:14:06AM +0200, Yann MORERE wrote:
>
> But i have some probleme, when updating the bibliography via xemacs, the
> next compilation under lyx does not take into account the modification,
> i would like to regenerate the bibliography in fact relaunching the 3
>
I am running LyX 1.03, and I see on the web page that DocBook support
was added in this release, yet I can't find any mention of it in the
manuals or in the program. Can someone tell me where the DocBook
support is?
--
Bruce Momjian| http://www.op.net/~candle
I now see the DocBook support is only in 1.04. Sorry for the stupid
question.
--
Bruce Momjian| http://www.op.net/~candle
[EMAIL PROTECTED]| (610) 853-3000
+ If your life is a hard drive, | 830 Blythe Avenue
+ Christ can be your backup.
87 matches
Mail list logo