On Mon, Mar 13, 2000 at 09:53:03AM +0200, Tuukka Toivonen wrote:
How do I use a euro symbol in LyX. We are running LyX-1.1.4 on
As far as I know there's a LaTeX package (eurofont ?) that provides the Euro symbol.
Stefano
On Mon, Mar 13, 2000 at 01:47:06AM -0800, Gerald Gutierrez wrote:
Hi all.
I'll be submitting my thesis soon. The university requires that the thesis be
printed on one side only, but (poor me) all the printers I have access to are
duplex by default.
I don't want to manually change the
On Mon, Mar 13, 2000 at 01:56:13AM -0800, Kayvan A. Sylvan wrote:
On Mon, Mar 13, 2000 at 01:47:06AM -0800, Gerald Gutierrez wrote:
1) Generate a postscript file (foo.ps)
2) Use the psutils package and do:
i=0
while [ $i -lt 999 ]=== replace 999 with the number of pages
Hi,
I'm working since four weeks with lyx. In this time I have not found out,
how to get easily a german "ß" in the postscript. The only way it works, is
to write \ss\ in Latex-style. But this is not very comfortable.
I'm working since four weeks with lyx. In this time I have not found =
out,
how to get easily a german "=DF" in the postscript. The only way it =
works, is
to write \ss\ in Latex-style. But this is not very comfortable.=20
Have you tried to set Layout-Document-Language to 'German' and
* until now I have included my figures from xfig with eps which works
* fine.
* Now I need a formula inside the figure. The manual says, that I should
* save the figure in xfig as ps_tex and ps_tex_t.
* However, when I load ps_tex_t, I get an error message, that there is no
* bounding box.
* When
Nabil Hathout writes:
I use eurosym.sty and am satisfied by the typo.
Hmmm. I fetched the eurosym.sty package from a TeX archive, installed
it in a teTeX directory, did texhash, put \usepackage{eurosym} in the
preface and \euro{} in the text in TeX mode ... and I get errors about
missing
At least, it works fine with lyx 1.0.4, when I input the figure (use
Insert/Include File and check the input box) inside a figure float.
There may be problems when the special text flag in Xfig is not set, or when
a formula misses a $.
If I do this, then it displays "file=filename.pstex" and
* is there a special directory, where they should be?
It is easier if both your figures (pstex and pstex_t) are in the same directory
as the lyx file (since, as far as I understand, the pstex_t includes the path
for the pstex).
* 2. -insert-file
*I have given filename.pstex_t
*It does
Insert a \usepackage{epsfig} in your preamble (doesn't work without it here)
this was the problem, now with this it works, thanks for your help.
The disadvantage is, that I cannot see the figure anymore on the screen.
This is the thing I like most with LyX compared to other LaTeX editors.
Is
Bad form to follow-up on my own query, but the complete eurosym
package, available at CTAN sites, includes the metafont specs, tfm
files, and .sty sheet to allow the use of the euro symbol with any
font. It works fine with LyX.
My thanks to all who offered suggestions in response to my original
Date: Mon, 13 Mar 2000 14:32:39 +0100 (MET)
From: Torsten Mueller [EMAIL PROTECTED]
Subject: Re: xfig figure with formula
To: [EMAIL PROTECTED]
Insert a \usepackage{epsfig} in your preamble (doesn't work without it here)
this was the problem, now with this it works, thanks for your help.
The
Hi,
I try to install lyx1.1.4 on a Mandrake 7.0.
configure : OK
make :OK
make install : OK
when I launch it :
lyx: error in loading shared libraries: libc.so.5: cannot open shared
object file: No such file or directory
if I type locate libc.so.5 I have :
you also have to copy the eurosym directories src (and run make) and
tfm.
regards,
--Nabil
Ronald Florence writes:
Nabil Hathout writes:
I use eurosym.sty and am satisfied by the typo.
Hmmm. I fetched the eurosym.sty package from a TeX archive, installed
it in a teTeX
Yes, use the other way round: import LyX formulas in xfig.
interesting idea, thanks,
Torsten
From: Andre Poenitz [EMAIL PROTECTED]
Subject: Re: xfig figure with formula
To: [EMAIL PROTECTED]
Date: Mon, 13 Mar 2000 15:56:44 +0100 (MET)
Cc: [EMAIL PROTECTED], [EMAIL PROTECTED]
Yes, use the other way round: import LyX formulas in xfig.
interesting idea, thanks,
Maybe another way (I
Hi,
I have tried to install LyX under Windows NT 4.0 following your
instructions. Running runconfigure.bat I encountered the following
problem:
c:\apps\lyx\binsh -e runconfigure.sh
cd: can't cd to \apps\lyx\share\lyx
Do you have any idea what went wrong?
Sincerely,
Roland Beucker
[EMAIL
Greets,
Well, the tiem has come when I finally have a very serious application
of the whole LyX/LaTeX software, and I have come upon two problems.
The first problem is as follows: When I insert a table of contents, it
works just fine, except for the fact that it is written in
I have tried to install LyX under Windows NT 4.0 following your
instructions. Running runconfigure.bat I encountered the following
problem:
c:\apps\lyx\binsh -e runconfigure.sh
cd: can't cd to \apps\lyx\share\lyx
Do you have any idea what went wrong?
No. Does this directory exist? Are
Not a bad idea. What name do you suggest?
comp.text.lyx?
Why not?
And somebody has to start the official discussion...
I would really like to start the official discussion but I think that a LyX
"expert" is more entitled for such a job. As I said I am only a beginner
with a couple weeks of
I am not an "expert" either, but I strongly support the idea of forming
a newsgroup.
Norm Matloff
On Mon, Mar 13, 2000 at 12:55:03PM -0500, Wail Gueaieb wrote:
Not a bad idea. What name do you suggest?
comp.text.lyx?
Why not?
And somebody has to start the official discussion...
I am not an "expert" either, but I strongly support the idea of forming
a newsgroup.
So there are at least three of us ;-)
I just had a look at news.admin.misc and found a message under
Message-ID: [EMAIL PROTECTED]
("How to Create a New Usenet Newsgroup")
that explains the process of
Andre Poenitz wrote:
I am not an "expert" either, but I strongly support the idea of forming
a newsgroup.
So there are at least three of us ;-)
I just had a look at news.admin.misc and found a message under
Message-ID: [EMAIL PROTECTED]
("How to Create a New Usenet Newsgroup")
that
As a result of this experience I MUCH prefer moderated usergroups.
Personally I hate the lag created by moderation.
Of course this would require a fair amount of work by the moderator.
And that's the problem... well, before argueing whether we will find a
moderator we could as well ask
Hi...
I've just noticed something that has apparently been this way for some
time, but now that I've noticed it bothers me. :)
I have several documents, just for personal and informal use, that use
the "report (koma-script)" style. In the printed output, the captions of
On Mon, Mar 13, 2000 at 08:42:16PM +0100, Andre Poenitz wrote:
As a result of this experience I MUCH prefer moderated usergroups.
Personally I hate the lag created by moderation.
I agree about the lag. The purpose of this newsgroup would be to get
QUICK help on problems.
The goal of
Hello lyx-users,
I will install Lyx 1.1.4 on my Suse Linux 6.3, but when i try
"./configure" i get always the same error message.
Error: "Can't find libxforms.so..." and "Forms.h"
But i have installed xforms 0.88 and i tried it again after i have
installed xforms 0.89.glibc and it doesn't
On Sun, 12 Mar 2000, Wail Gueaieb wrote:
Hi everyone,
Hi Wail!
I am a big fan of LyX, though I am still a beginner in it.
The same with me ;o)
I understand that what you guys are doing to take LyX to the top is
a great work. However, I strongly belive that creating a LyX
newsgroup
On Tue, Mar 14, 2000 at 09:41:39AM +1000, Allan Rae wrote:
You need to either recompile lyx using
./configure --with-debug
or get Kayvan's lyxgdb rpm.
In fact, I just made a lyxgdb RPM for lyx-1.1.4-fix2
It contains a ``lyxgdb'' binary which is lyx-1.1.4-fix2 binary
with all the
Hi everyone,
We now have the Redhat 5.X RPM packages for lyx-1.1.4-fix2 uploaded
to ftp.sylvan.com.
It's in the usual location: ftp://ftp.sylvan.com/pub/lyx
A big Thank You to Jacek for keeping the LyX ftp archives up-to-date!
Enjoy!
- Forwarded message from "Jacek M. Holeczek" [EMAIL
On Mon, Mar 13, 2000 at 09:53:03AM +0200, Tuukka Toivonen wrote:
How do I use a euro symbol in LyX. We are running LyX-1.1.4 on
As far as I know there's a LaTeX package (eurofont ?) that provides the Euro symbol.
Stefano
On Mon, Mar 13, 2000 at 01:47:06AM -0800, Gerald Gutierrez wrote:
Hi all.
I'll be submitting my thesis soon. The university requires that the thesis be
printed on one side only, but (poor me) all the printers I have access to are
duplex by default.
I don't want to manually change the
On Mon, Mar 13, 2000 at 01:56:13AM -0800, Kayvan A. Sylvan wrote:
On Mon, Mar 13, 2000 at 01:47:06AM -0800, Gerald Gutierrez wrote:
1) Generate a postscript file (foo.ps)
2) Use the psutils package and do:
i=0
while [ $i -lt 999 ]=== replace 999 with the number of pages
Hi,
I'm working since four weeks with lyx. In this time I have not found out,
how to get easily a german "ß" in the postscript. The only way it works, is
to write \ss\ in Latex-style. But this is not very comfortable.
I'm working since four weeks with lyx. In this time I have not found =
out,
how to get easily a german "=DF" in the postscript. The only way it =
works, is
to write \ss\ in Latex-style. But this is not very comfortable.=20
Have you tried to set Layout-Document-Language to 'German' and
* until now I have included my figures from xfig with eps which works
* fine.
* Now I need a formula inside the figure. The manual says, that I should
* save the figure in xfig as ps_tex and ps_tex_t.
* However, when I load ps_tex_t, I get an error message, that there is no
* bounding box.
* When
Nabil Hathout writes:
I use eurosym.sty and am satisfied by the typo.
Hmmm. I fetched the eurosym.sty package from a TeX archive, installed
it in a teTeX directory, did texhash, put \usepackage{eurosym} in the
preface and \euro{} in the text in TeX mode ... and I get errors about
missing
At least, it works fine with lyx 1.0.4, when I input the figure (use
Insert/Include File and check the input box) inside a figure float.
There may be problems when the special text flag in Xfig is not set, or when
a formula misses a $.
If I do this, then it displays "file=filename.pstex" and
* is there a special directory, where they should be?
It is easier if both your figures (pstex and pstex_t) are in the same directory
as the lyx file (since, as far as I understand, the pstex_t includes the path
for the pstex).
* 2. -insert-file
*I have given filename.pstex_t
*It does
Insert a \usepackage{epsfig} in your preamble (doesn't work without it here)
this was the problem, now with this it works, thanks for your help.
The disadvantage is, that I cannot see the figure anymore on the screen.
This is the thing I like most with LyX compared to other LaTeX editors.
Is
Bad form to follow-up on my own query, but the complete eurosym
package, available at CTAN sites, includes the metafont specs, tfm
files, and .sty sheet to allow the use of the euro symbol with any
font. It works fine with LyX.
My thanks to all who offered suggestions in response to my original
Date: Mon, 13 Mar 2000 14:32:39 +0100 (MET)
From: Torsten Mueller [EMAIL PROTECTED]
Subject: Re: xfig figure with formula
To: [EMAIL PROTECTED]
Insert a \usepackage{epsfig} in your preamble (doesn't work without it here)
this was the problem, now with this it works, thanks for your help.
The
Hi,
I try to install lyx1.1.4 on a Mandrake 7.0.
configure : OK
make :OK
make install : OK
when I launch it :
lyx: error in loading shared libraries: libc.so.5: cannot open shared
object file: No such file or directory
if I type locate libc.so.5 I have :
you also have to copy the eurosym directories src (and run make) and
tfm.
regards,
--Nabil
Ronald Florence writes:
Nabil Hathout writes:
I use eurosym.sty and am satisfied by the typo.
Hmmm. I fetched the eurosym.sty package from a TeX archive, installed
it in a teTeX
Yes, use the other way round: import LyX formulas in xfig.
interesting idea, thanks,
Torsten
From: Andre Poenitz [EMAIL PROTECTED]
Subject: Re: xfig figure with formula
To: [EMAIL PROTECTED]
Date: Mon, 13 Mar 2000 15:56:44 +0100 (MET)
Cc: [EMAIL PROTECTED], [EMAIL PROTECTED]
Yes, use the other way round: import LyX formulas in xfig.
interesting idea, thanks,
Maybe another way (I
Hi,
I have tried to install LyX under Windows NT 4.0 following your
instructions. Running runconfigure.bat I encountered the following
problem:
c:\apps\lyx\binsh -e runconfigure.sh
cd: can't cd to \apps\lyx\share\lyx
Do you have any idea what went wrong?
Sincerely,
Roland Beucker
[EMAIL
Greets,
Well, the tiem has come when I finally have a very serious application
of the whole LyX/LaTeX software, and I have come upon two problems.
The first problem is as follows: When I insert a table of contents, it
works just fine, except for the fact that it is written in
I have tried to install LyX under Windows NT 4.0 following your
instructions. Running runconfigure.bat I encountered the following
problem:
c:\apps\lyx\binsh -e runconfigure.sh
cd: can't cd to \apps\lyx\share\lyx
Do you have any idea what went wrong?
No. Does this directory exist? Are
Not a bad idea. What name do you suggest?
comp.text.lyx?
Why not?
And somebody has to start the official discussion...
I would really like to start the official discussion but I think that a LyX
"expert" is more entitled for such a job. As I said I am only a beginner
with a couple weeks of
I am not an "expert" either, but I strongly support the idea of forming
a newsgroup.
Norm Matloff
On Mon, Mar 13, 2000 at 12:55:03PM -0500, Wail Gueaieb wrote:
Not a bad idea. What name do you suggest?
comp.text.lyx?
Why not?
And somebody has to start the official discussion...
I am not an "expert" either, but I strongly support the idea of forming
a newsgroup.
So there are at least three of us ;-)
I just had a look at news.admin.misc and found a message under
Message-ID: [EMAIL PROTECTED]
("How to Create a New Usenet Newsgroup")
that explains the process of
Andre Poenitz wrote:
I am not an "expert" either, but I strongly support the idea of forming
a newsgroup.
So there are at least three of us ;-)
I just had a look at news.admin.misc and found a message under
Message-ID: [EMAIL PROTECTED]
("How to Create a New Usenet Newsgroup")
that
As a result of this experience I MUCH prefer moderated usergroups.
Personally I hate the lag created by moderation.
Of course this would require a fair amount of work by the moderator.
And that's the problem... well, before argueing whether we will find a
moderator we could as well ask
Hi...
I've just noticed something that has apparently been this way for some
time, but now that I've noticed it bothers me. :)
I have several documents, just for personal and informal use, that use
the "report (koma-script)" style. In the printed output, the captions of
On Mon, Mar 13, 2000 at 08:42:16PM +0100, Andre Poenitz wrote:
As a result of this experience I MUCH prefer moderated usergroups.
Personally I hate the lag created by moderation.
I agree about the lag. The purpose of this newsgroup would be to get
QUICK help on problems.
The goal of
Hello lyx-users,
I will install Lyx 1.1.4 on my Suse Linux 6.3, but when i try
"./configure" i get always the same error message.
Error: "Can't find libxforms.so..." and "Forms.h"
But i have installed xforms 0.88 and i tried it again after i have
installed xforms 0.89.glibc and it doesn't
On Sun, 12 Mar 2000, Wail Gueaieb wrote:
Hi everyone,
Hi Wail!
I am a big fan of LyX, though I am still a beginner in it.
The same with me ;o)
I understand that what you guys are doing to take LyX to the top is
a great work. However, I strongly belive that creating a LyX
newsgroup
On Tue, Mar 14, 2000 at 09:41:39AM +1000, Allan Rae wrote:
You need to either recompile lyx using
./configure --with-debug
or get Kayvan's lyxgdb rpm.
In fact, I just made a lyxgdb RPM for lyx-1.1.4-fix2
It contains a ``lyxgdb'' binary which is lyx-1.1.4-fix2 binary
with all the
Hi everyone,
We now have the Redhat 5.X RPM packages for lyx-1.1.4-fix2 uploaded
to ftp.sylvan.com.
It's in the usual location: ftp://ftp.sylvan.com/pub/lyx
A big Thank You to Jacek for keeping the LyX ftp archives up-to-date!
Enjoy!
- Forwarded message from "Jacek M. Holeczek" [EMAIL
On Mon, Mar 13, 2000 at 09:53:03AM +0200, Tuukka Toivonen wrote:
> How do I use a euro symbol in LyX. We are running LyX-1.1.4 on
As far as I know there's a LaTeX package (eurofont ?) that provides the Euro symbol.
Stefano
On Mon, Mar 13, 2000 at 01:47:06AM -0800, Gerald Gutierrez wrote:
>
> Hi all.
>
> I'll be submitting my thesis soon. The university requires that the thesis be
> printed on one side only, but (poor me) all the printers I have access to are
> duplex by default.
>
> I don't want to manually
On Mon, Mar 13, 2000 at 01:56:13AM -0800, Kayvan A. Sylvan wrote:
> On Mon, Mar 13, 2000 at 01:47:06AM -0800, Gerald Gutierrez wrote:
> 1) Generate a postscript file (foo.ps)
>
> 2) Use the psutils package and do:
>
> i=0
> while [ $i -lt 999 ]<=== replace 999 with the number of
Hi,
I'm working since four weeks with lyx. In this time I have not found out,
how to get easily a german "ß" in the postscript. The only way it works, is
to write \ss\ in Latex-style. But this is not very comfortable.
> I'm working since four weeks with lyx. In this time I have not found =
> out,
> how to get easily a german "=DF" in the postscript. The only way it =
> works, is
> to write \ss\ in Latex-style. But this is not very comfortable.=20
Have you tried to set Layout->Document->Language to 'German'
* until now I have included my figures from xfig with eps which works
* fine.
* Now I need a formula inside the figure. The manual says, that I should
* save the figure in xfig as ps_tex and ps_tex_t.
* However, when I load ps_tex_t, I get an error message, that there is no
* bounding box.
* When
Nabil Hathout writes:
I use eurosym.sty and am satisfied by the typo.
Hmmm. I fetched the eurosym.sty package from a TeX archive, installed
it in a teTeX directory, did texhash, put \usepackage{eurosym} in the
preface and \euro{} in the text in TeX mode ... and I get errors about
missing
>At least, it works fine with lyx 1.0.4, when I input the figure (use
>Insert/Include File and check the input box) inside a figure float.
>There may be problems when the special text flag in Xfig is not set, or when
>a formula misses a $.
If I do this, then it displays "file=filename.pstex" and
* is there a special directory, where they should be?
It is easier if both your figures (pstex and pstex_t) are in the same directory
as the lyx file (since, as far as I understand, the pstex_t includes the path
for the pstex).
* 2. ->insert->file
*I have given filename.pstex_t
*It does
>Insert a \usepackage{epsfig} in your preamble (doesn't work without it here)
this was the problem, now with this it works, thanks for your help.
The disadvantage is, that I cannot see the figure anymore on the screen.
This is the thing I like most with LyX compared to other LaTeX editors.
Is
Bad form to follow-up on my own query, but the complete eurosym
package, available at CTAN sites, includes the metafont specs, tfm
files, and .sty sheet to allow the use of the euro symbol with any
font. It works fine with LyX.
My thanks to all who offered suggestions in response to my original
>>Date: Mon, 13 Mar 2000 14:32:39 +0100 (MET)
>>From: Torsten Mueller <[EMAIL PROTECTED]>
>>Subject: Re: xfig figure with formula
>>To: [EMAIL PROTECTED]
>>
>>>Insert a \usepackage{epsfig} in your preamble (doesn't work without it here)
>>this was the problem, now with this it works, thanks for
Hi,
I try to install lyx1.1.4 on a Mandrake 7.0.
configure : OK
make :OK
make install : OK
when I launch it :
lyx: error in loading shared libraries: libc.so.5: cannot open shared
object file: No such file or directory
if I type locate libc.so.5 I have :
you also have to copy the eurosym directories src (and run make) and
tfm.
regards,
--Nabil
Ronald Florence writes:
> Nabil Hathout writes:
>
> I use eurosym.sty and am satisfied by the typo.
>
> Hmmm. I fetched the eurosym.sty package from a TeX archive, installed
> it in a teTeX
>Yes, use the other way round: import LyX formulas in xfig.
interesting idea, thanks,
Torsten
>>From: Andre Poenitz <[EMAIL PROTECTED]>
>>Subject: Re: xfig figure with formula
>>To: [EMAIL PROTECTED]
>>Date: Mon, 13 Mar 2000 15:56:44 +0100 (MET)
>>Cc: [EMAIL PROTECTED], [EMAIL PROTECTED]
>>
>>> >Yes, use the other way round: import LyX formulas in xfig.
>>> interesting idea, thanks,
>>
Hi,
I have tried to install LyX under Windows NT 4.0 following your
instructions. Running runconfigure.bat I encountered the following
problem:
c:\apps\lyx\bin>sh -e runconfigure.sh
cd: can't cd to \apps\lyx\share\lyx
Do you have any idea what went wrong?
Sincerely,
Roland Beucker
[EMAIL
Greets,
Well, the tiem has come when I finally have a very serious application
of the whole LyX/LaTeX software, and I have come upon two problems.
The first problem is as follows: When I insert a table of contents, it
works just fine, except for the fact that it is written in
> I have tried to install LyX under Windows NT 4.0 following your
> instructions. Running runconfigure.bat I encountered the following
> problem:
>
> c:\apps\lyx\bin>sh -e runconfigure.sh
> cd: can't cd to \apps\lyx\share\lyx
>
> Do you have any idea what went wrong?
No. Does this directory
> Not a bad idea. What name do you suggest?
> comp.text.lyx?
Why not?
> And somebody has to start the official discussion...
I would really like to start the official discussion but I think that a LyX
"expert" is more entitled for such a job. As I said I am only a beginner
with a couple weeks
I am not an "expert" either, but I strongly support the idea of forming
a newsgroup.
Norm Matloff
On Mon, Mar 13, 2000 at 12:55:03PM -0500, Wail Gueaieb wrote:
> > Not a bad idea. What name do you suggest?
> > comp.text.lyx?
>
> Why not?
>
> > And somebody has to start the official
> I am not an "expert" either, but I strongly support the idea of forming
> a newsgroup.
So there are at least three of us ;-)
I just had a look at news.admin.misc and found a message under
Message-ID: <[EMAIL PROTECTED]>
("How to Create a New Usenet Newsgroup")
that explains the process of
Andre Poenitz wrote:
>
> > I am not an "expert" either, but I strongly support the idea of forming
> > a newsgroup.
>
> So there are at least three of us ;-)
>
> I just had a look at news.admin.misc and found a message under
> Message-ID: <[EMAIL PROTECTED]>
> ("How to Create a New Usenet
> As a result of this experience I MUCH prefer moderated usergroups.
Personally I hate the lag created by moderation.
> Of course this would require a fair amount of work by the moderator.
And that's the problem... well, before argueing whether we will find a
moderator we could as well ask
Hi...
I've just noticed something that has apparently been this way for some
time, but now that I've noticed it bothers me. :)
I have several documents, just for personal and informal use, that use
the "report (koma-script)" style. In the printed output, the captions of
On Mon, Mar 13, 2000 at 08:42:16PM +0100, Andre Poenitz wrote:
> > As a result of this experience I MUCH prefer moderated usergroups.
> Personally I hate the lag created by moderation.
I agree about the lag. The purpose of this newsgroup would be to get
QUICK help on problems.
The goal of
Hello lyx-users,
I will install Lyx 1.1.4 on my Suse Linux 6.3, but when i try
"./configure" i get always the same error message.
Error: "Can't find libxforms.so..." and "Forms.h"
But i have installed xforms 0.88 and i tried it again after i have
installed xforms 0.89.glibc and it doesn't
On Sun, 12 Mar 2000, Wail Gueaieb wrote:
> Hi everyone,
Hi Wail!
> I am a big fan of LyX, though I am still a beginner in it.
The same with me ;o)
> I understand that what you guys are doing to take LyX to the top is
> a great work. However, I strongly belive that creating a LyX
>
On Tue, Mar 14, 2000 at 09:41:39AM +1000, Allan Rae wrote:
>
> You need to either recompile lyx using
> ./configure --with-debug
>
> or get Kayvan's lyxgdb rpm.
In fact, I just made a lyxgdb RPM for lyx-1.1.4-fix2
It contains a ``lyxgdb'' binary which is lyx-1.1.4-fix2 binary
with all
Hi everyone,
We now have the Redhat 5.X RPM packages for lyx-1.1.4-fix2 uploaded
to ftp.sylvan.com.
It's in the usual location: ftp://ftp.sylvan.com/pub/lyx
A big Thank You to Jacek for keeping the LyX ftp archives up-to-date!
Enjoy!
- Forwarded message from "Jacek M. Holeczek" <[EMAIL
90 matches
Mail list logo