Hi,
My experience was similar. texmacs was so slow as to being
unusable. Perhaps this is not a problem for Quake III machines :)
Juha
On Tue, 24 Apr 2001, Niklas Werner wrote:
Hi All!
Sorry to be a bit offtopic. (This is not meant to start a new WYSIWYM
vs. WYSIWYG debate)
Has
On Wed, 25 Apr 2001 06:48:54 +0200 (CEST) wrote Andre Poenitz [EMAIL PROTECTED]:
okay so that worked very nicely for a minute - then i saved the file and
tried to re-open it.
...
Which version of LyX is that?
This also happen with 1.1.6fix1 here.
However, if I use \mbox{\AA} instead of
On Wed, 25 Apr 2001, Allan Rae wrote:
I'll give them that one for the moment (although Maple LaTeX import
apparently works) and we've had at least two different interested groups
start some work on this but they seem to have disappeared.
Who cares about proprietary Maple ;)
What would be
Hi,
Our Department (of History in the U of Oulu, Finland) has, of course,
their own demands on the looks of things... Here are what are not quite
obvious (to me):
1. Page numbering:
First page. This is the front page. I get a page number here,
which is not good.
Second page.
Date: Wed, 25 Apr 2001 10:07:45 +0300 (EEST)
From: Tuukka Toivonen [EMAIL PROTECTED]
To: Allan Rae [EMAIL PROTECTED]
cc: LyX Users [EMAIL PROTECTED]
Subject: Re: [OT] TeXmacs? (or Maxima LyX)
On Wed, 25 Apr 2001, Allan Rae wrote:
I'll give them that one for the moment (although Maple LaTeX
On Tue, 24 Apr 2001 17:19:05 +0200 (CEST) wrote Andre Poenitz [EMAIL PROTECTED]:
4.You can use TeXmacs as an interface to computer algebra systems.
[...]
I was thinking about developing 4 for some time but a number of
circumstances have halted the project. Please mail me if
On Wed, 25 Apr 2001, Juha Siltala wrote:
Our Department (of History in the U of Oulu, Finland) has, of course,
Hello!
1. Page numbering:
First page. This is the front page. I get a page number here,
which is not good.
Use \thispagestyle{empty} in red tex on those pages.
You would get no ERT at all in LyX if reLyX was able to convert
{1}\over{\sqrt{3}} as \frac{1}{sqrt{3}}: this is more difficult...
Is it a weakness of reLyX (i.e. no implementation of math TeX constructs
in mathed ?).
That's not a job for reLyX, but for the mathed parser...
Andre'
--
So, how do you do it? ;-)
Works only with latest CVS and the patch I send yesterday to lyx-devel
and only for a very limited set of operations.
Note that this combination is not to be used for serious work. Latest
recommended version for serious work involving math is CVS from early
February,
From: [EMAIL PROTECTED]
Subject: Prevent linebreaks and pagenumbering in TOC
To: [EMAIL PROTECTED]
Date: Wed, 25 Apr 2001 10:07:37 +0200
X-MIMETrack: Serialize by Router on NNMAIL01/SRV/MAN_Nutzfahrzeuge(Release
5.0.4 |June 8, 2000) at 04/25/2001 10:07:38 AM
Hi Lyxers!
I´m a Lyx-newbie and
Stefano Ghirlanda wrote:
Matej Cepl [EMAIL PROTECTED] writes:
Wereb't there some attempts to rewrite NeXT environment for X as
a free soft (GNUStep)? As I remember, they tried to create some
kind of Display PostScript based on the Ghostscript (there are
some remaints in the
On Wed, 25 Apr 2001, Ragnar Beer wrote:
-
|1|2| - no bottom rule below cell 1
---
|3|4|
-
Set multicolumn from Tabular Layout/Cell and then use Cell/Borders.
Example attached.
#LyX 1.1 created this file. For more info see http://www.lyx.org/
\lyxformat 218
\textclass article
I'll give them that one for the moment (although Maple LaTeX import
apparently works) and we've had at least two different interested groups
start some work on this but they seem to have disappeared.
Who cares about proprietary Maple ;)
Well, I care, since that's what I am using.
The
* Jean-Pierre.Chretien [EMAIL PROTECTED], 2001-04-25 11:37 +0200:
3. Bibliography: I need to have separate sections for stuff like
sources, research, printed/electronic documents and the like. So
there should be some headings for these.
This is often required, and there exists a package to
Dear all,
I have been using lyx 1.0.1/1.0.4 for more than one year. Recently,
I had many problems with installation.
I am not sure if I can work with 1.1.6 without any problem. If not,
I'd better install 1.0.1 or 1.0.4.
Before I was working on Digital Unix. Now I changed to Sun Solaris,
probably
* [EMAIL PROTECTED] [EMAIL PROTECTED], 2001-04-25 11:37 +0200:
1. The linebreaks within words at the TOC look ugly. How can I prevent
these linebreaks in the TOC?
I tried
\mbox{ bla bla .bla}
but then, there wasn´t any linebreak at all and the line in the TOC left
the right
Thanks for everybody's input here.
Sounds like I'll have to take a gander at the source to see what the problem
is.
Lyx is 1.1.5fix2
\AA{} does not work
{\AA} does not work
only
textrm{\AA} seems to have any function at all
let me know if you all come up with anything in the meantime
brad
On
On Tue, Apr 24, 2001 at 04:54:01PM +0200, Nagy Erno wrote:
Hello!
If I set the language to hungarian (magyar) the lyx generate code like
this
\documentclass[a4paper,magyar]{article}
\usepackage[latin2]{inputenc}
\usepackage{babel}
istead of
\documentclass[a4paper,magyar]{article}
On Wed, Apr 25, 2001 at 01:59:26PM +0200, Nagy Erno wrote:
On Tue, Apr 24, 2001 at 04:54:01PM +0200, Nagy Erno wrote:
If I set the language to hungarian (magyar) the lyx generate code like
this
\documentclass[a4paper,magyar]{article}
\usepackage[latin2]{inputenc}
Wolfgang Engelmann [EMAIL PROTECTED] writes:
I am getting too many unprocessed floats in a book
A clearpage cures it and its ok after a chapter.
However, if I insert it after a section an empty page is
inserted after the figure floates have been placed, which
is undesired. How can I
Andre Berger worte:
The name is bibtopics. A different .bib file is sourced for each
topic.
The exact name is bibtopic. Get it at
ftp://ftp.dante.de/tex-archive/macros/latex/contrib/supported/bibtopic/
But notice that LyX doesn't support it by itself (yet). You need an
external script
On Wed, 25 Apr 2001, Dekel Tsur wrote:
On Tue, Apr 24, 2001 at 04:54:01PM +0200, Nagy Erno wrote:
If I set the language to hungarian (magyar) the lyx generate code like
this
\documentclass[a4paper,magyar]{article}
\usepackage[latin2]{inputenc}
\usepackage{babel}
istead of
On Wed, 25 Apr 2001 07:29:32 -0400 wrote Brad Langhorst [EMAIL PROTECTED]:
Thanks for everybody's input here.
Sounds like I'll have to take a gander at the source to see what the problem
is.
Lyx is 1.1.5fix2
\AA{} does not work
{\AA} does not work
only
textrm{\AA} seems to have any
since I upgraded to LyX 1.1.6fix1 (via rpm), LyX does not react on my
~.Xdefault setting. I had two lines telling
LyX*width: 720
LyX*height:670
As far as I know LyX does not check any .X* settings.
Andre'
--
André Pönitz . [EMAIL
It may be, but the missing \usepackage[T1]{fontenc} line is bug,
because the division of words will be wrong. Unfortunatly I can't try
it with the leatest lyx (I use it from debian package). Please sombody
(who has the current version) try it.
Do you get the 'usepackage[T1]{fontenc}'
Hi,
since I upgraded to LyX 1.1.6fix1 (via rpm), LyX does not react on my
~.Xdefault setting. I had two lines telling
LyX*width: 720
LyX*height:670
and with 1.1.5 this worked well. After looking in the man page, I changed
this to
LyX*geometry 720x670
but still no effect.
Jacek M. Holeczek [EMAIL PROTECTED] writes:
| Hi,
| I've met the following problem.
| I would need a LongTable (Table Layout - Spec. Table - Longtable)
| which is inside of a MiniPage (Layout - Paragraph Environment -
| ParagraphExtra Layout - [Minipage + Width - 100%]).
| As long as I have the
On Wed, 25 Apr 2001, Jacobo Myesrton wrote:
I think that LyX could look very good ported to MacOSX. The port should
not be very difficult. It is a matter of rewriting the GUI in Cocoa.
...not be very difficult ;-)
Complexity of porting medium-to-low, learning curve of Cocoa unknown.
Is
Have a look at jurabib: http://userpage.fu-berlin.de/~jberger/ for the
footnotes. You will find that it handles citations in footnotes in a relatively
flexible way. You can also download the bst file jachicago, which is a
modification of achicago.bst made to work with the jurabib.sty file.
4.
I think that LyX could look very good ported to MacOSX. The port should
not be very difficult. It is a matter of rewriting the GUI in Cocoa. Is
somebody working on this?
Wolfgang Engelmann wrote:
Dear Lyx-Seelsorger
what did I do wrong:
my list of figures shows correctly figure numbers numbered according to the
chapters
e.g.
2.6
2.7
etc
however in the text it is referred to as
figure 2.3.1
figure 2.3.2
I am using book style
and the
Jacek M. Holeczek wrote:
Hi,
I've met the following problem.
I would need a LongTable (Table Layout - Spec. Table - Longtable)
which is inside of a MiniPage (Layout - Paragraph Environment -
ParagraphExtra Layout - [Minipage + Width - 100%]).
As long as I have the LongTable outside of the
Many thanks for your reply.
This is how minipages work.
Let me ask a small question on this occasion - do you mean that a minipage
will NEVER be split over pages (even if it is just a long piece of text) ?
Why do you need it inside a minipage?
On principle because I have a lng table with
Hi Guenter...
I had the same problem. The only way I found around it was to include
the command line command in a start button on the Enlightenment start
bar. LyX does not seem to want to respond to the .Xdefaults file at
all. Also, since I'm using a hi-res screen, I couldn't use the straignt
Hi,
I've met the following problem.
I would need a LongTable (Table Layout - Spec. Table - Longtable)
which is inside of a MiniPage (Layout - Paragraph Environment -
ParagraphExtra Layout - [Minipage + Width - 100%]).
As long as I have the LongTable outside of the MiniPage it is correctly
split
Is there a program that will convert RTF to LaTex (or Lyx) that would
make it easier to import a document into Lyx with most of the formatting
in place?
Converting RTF to, importing the text to Lyx, and then going through the
document by hand is a bit time-comsuming when dealing with 60 page+
On Wednesday 25 April 2001 09:05 am, Guenter Milde wrote:
On Wed, 25 Apr 2001 07:29:32 -0400 wrote Brad Langhorst
[EMAIL PROTECTED]:
Thanks for everybody's input here.
Sounds like I'll have to take a gander at the source to see what the
problem is.
Lyx is 1.1.5fix2
\AA{} does not
On steda 25 duben 2001 8:42 you wrote:
It may be, but the missing "\usepackage[T1]{fontenc}" line
is bug, because the division of words will be wrong.
Unfortunatly I can't try it with the leatest lyx (I use it
from debian package). Please sombody (who has the current
version) try it.
On Wednesday 25 April 2001 16:25, Andre Poenitz wrote:
since I upgraded to LyX 1.1.6fix1 (via rpm), LyX does not react on my
~.Xdefault setting. I had two lines telling
LyX*width: 720
LyX*height:670
As far as I know LyX does not check any .X* settings.
So what, if anything,
On Wed, Apr 25, 2001 at 12:55:34PM -0400, Wolfgang Engelmann wrote:
I am getting too many unprocessed floats in a book
A clearpage cures it and its ok after a chapter.
However, if I insert it after a section an empty page is
inserted after the figure floates have been placed, which
is
On Wed, Apr 25, 2001 at 03:17:03PM +0200, wrote:
since I upgraded to LyX 1.1.6fix1 (via rpm), LyX does not react on my
~.Xdefault setting. I had two lines telling
LyX*width: 720
LyX*height:670
and with 1.1.5 this worked well. After looking in the man page, I changed
this to
On Wed, Apr 25, 2001 at 02:34:11PM +0200, J?rgen Spitzm?ller wrote:
Andre Berger worte:
The name is bibtopics. A different .bib file is sourced for each
topic.
The exact name is bibtopic. Get it at
ftp://ftp.dante.de/tex-archive/macros/latex/contrib/supported/bibtopic/
But notice
- Original Message -
From: "Matej Cepl" [EMAIL PROTECTED]
To: "LyX disc. list" [EMAIL PROTECTED]
Sent: Wednesday, April 25, 2001 9:12 AM
Subject: Embedded Python (Was: Re: [OT] TeXmacs?)
On ter 24 duben 2001 21:51 you wrote:
3.TeXmacs comes with the Guile/Scheme extension
Matej Cepl writes:
YES! Than I would be able to get my beloved transpose-characters
function, which nobody cares to implement in LyX.
I wouldn't know how to implement it, but I'll second the request. In
addition to a transpose-characters (C-t) function, LyX could use a
transpose-words
From: Matej Cepl [EMAIL PROTECTED]
To: LyX disc. list [EMAIL PROTECTED]
Subject: Embedded Python (Was: Re: [OT] TeXmacs?)
Date: Wed, 25 Apr 2001 10:12:56 -0400
On úterý 24 duben 2001 21:51 you wrote:
3.TeXmacs comes with the Guile/Scheme extension
language.
Hmmm... we'll almost
Jean-Pierre.Chretie
n An:
Matej Cepl [EMAIL PROTECTED] writes:
| YES! Than I would be able to get my beloved transpose-characters
| function, which nobody cares to implement in LyX.
You only have to provide a patch...
(same as you would have to do with python, unless you don't want to
share of course.)
--
On ter 24 duben 2001 21:51 you wrote:
3.TeXmacs comes with the Guile/Scheme extension
language.
Hmmm... we'll almost certainly end up with Python. Asger has
already shown about 3 years ago that Python can be embedded in
a couple of lines. The problem is more a matter of "should
On Wed, Apr 25, 2001 at 09:40:59AM -0400, Brad Langhorst wrote:
I think my goal is now two fold
1) figure out what this textrm is all about and why it gets funky on save and
reopen
2) add something like \rho or \pi for \AA to the math mode so that we don't
have to enter another mode to get
On Wed 25 duben 2001 12:06 Lars Gullik Bj?nnes wrote:
Matej Cepl [EMAIL PROTECTED] writes:
| YES! Than I would be able to get my beloved
| transpose-characters function, which nobody cares to
| implement in LyX.
You only have to provide a patch...
(same as you would have to do with
Hi Allan,
Actually, there is an acconfig.h in the sigc++ directory already. It is
identical to the one you sent out.
It sounds like something more peculiar to the make utility on the tru64
operating system?
Regards,
Dave
On Wed, 25 Apr 2001, Allan Rae wrote:
On Tue, 24 Apr 2001, David
Shawn Koons wrote:
Is there a program that will convert RTF to LaTex (or Lyx) that would
make it easier to import a document into Lyx with most of the formatting
in place?
http://members.home.net/setlur/rtf2latex2e/
Herbert
--
http:[EMAIL PROTECTED]
Sorry I think I wasn't clear in my earlier post
I did try the mbox function and it works fine.
I would like to figure out what the problem is with the math parser's
handling of the textrm function and possibly add something like \rho
or \pi for \AA to the math parser so that it is easier to
On Wed, Apr 25, 2001 at 10:22:12AM +0300, Juha Siltala wrote:
Since most of your questions were answered by others, I'll answer only those
which weren't answered:
Second page. Table of contents. This should be page 1. No number
should be shown though.
Tuukka Toivonen wrote:
It's possible to change page number, afaik, but I don't know how.
\setpagecounter or something...
\setcounter{page}{1}
in TeX-Mode (Red Text) on the page which has to have pagenumber 1
2. Table of Contents: Introduction and Conclusion should not be
numbered, but
Hi,
you can use threeparttable for footnotes below the table.
But i think that you can't split these tables across
pages ...?
best
jan
On Wed, 25 Apr 2001, Jacek M. Holeczek wrote:
Many thanks for your reply.
This is how minipages work.
Let me ask a small question on this occasion - do
Andre Berger
uzscd5@uni-bAn: [EMAIL
Dekel Tsur wrote:
On Wed, Apr 25, 2001 at 12:55:34PM -0400, Wolfgang Engelmann wrote:
I am getting too many unprocessed floats in a book
A clearpage cures it and its ok after a chapter.
However, if I insert it after a section an empty page is
inserted after the figure floates have been
Jacek M. Holeczek wrote:
Many thanks for your reply.
This is how minipages work.
Let me ask a small question on this occasion - do you mean that a minipage
will NEVER be split over pages (even if it is just a long piece of text) ?
Why do you need it inside a minipage?
On principle
On Wed, Apr 25, 2001 at 08:32:28PM +0200, monty wrote:
?there is any quick way of changing a whole document written in uppercase to
lowercase?. I hope so, otherwise, i'll spend a extremly funny time doing it
(it's nine pages long).
You can change a word to lower case by pressing M-c down, or
monty wrote:
¿there is any quick way of changing a whole document written in uppercase to
lowercase?. I hope so, otherwise, i'll spend a extremly funny time doing it
(it's nine pages long).
a solution on the run ...
export it as ascii, or copy and paste the text in an
ascii-editor and save
Kayvan A. Sylvan [EMAIL PROTECTED] writes:
| On Wed, Apr 25, 2001 at 08:32:28PM +0200, monty wrote:
| ¿there is any quick way of changing a whole document written in uppercase to
| lowercase?. I hope so, otherwise, i'll spend a extremly funny time doing it
| (it's nine pages long).
|
|
Dekel Tsur wrote:
Actually, the CVS version have support for bibtopic or bibunits
(though current CVS is quite unstable, so it shouldn't be used).
Great news (at least for me)! Thank you for implementing this :-)
Will it be included in 1.2.0? And what does support mean: the
additional bibtex
Jacek == Jacek M Holeczek [EMAIL PROTECTED] writes:
Jacek P.S. May I ask an unrelated question - when is
Jacek the 1.1.6fix2 planed ?
Maybe will I be able to do it next week when I come back from
Anchorage. But I have been known to write that several times these
last monthes...
JMarc
://www.lyx.org/news/20010425.php3
but be patient.
It seems that the Norwegian mirror is rather slow at updating.
You can find it at the Italian mirror though:
http://www.it.lyx.org/news/20010425.php3
Allan. (ARRae)
On Wed, 25 Apr 2001, David Bailey wrote:
Hi Allan,
Actually, there is an acconfig.h in the sigc++ directory already. It is
identical to the one you sent out.
It sounds like something more peculiar to the make utility on the tru64
operating system?
Hmmm... It would seem that either there
On Sunday 22 April 2001 17:33, Matt Bandy wrote:
May I also recommend that the project register a domain name with the
OpenNIC project. OpenNIC is an alternative DNS root server. They operate a
An alternative *root server*? Man... I learn something new every day --
never even knew
Hi!
What's the keystroke to remove all the errors?
--
myriam
A new LDN will be available sometime in the next 30 minutes or so. So
don't rush off now and then complain that the URL is broken. I've
committed the changes to CVS but I want to go home by midnight if I can.
Anyway, here's the URL:
http://www.lyx.org/news/20010425.php3
Hi,
My experience was similar. texmacs was so slow as to being
unusable. Perhaps this is not a problem for Quake III machines :)
Juha
On Tue, 24 Apr 2001, Niklas Werner wrote:
Hi All!
Sorry to be a bit offtopic. (This is not meant to start a new WYSIWYM
vs. WYSIWYG debate)
Has
On Wed, 25 Apr 2001 06:48:54 +0200 (CEST) wrote Andre Poenitz [EMAIL PROTECTED]:
okay so that worked very nicely for a minute - then i saved the file and
tried to re-open it.
...
Which version of LyX is that?
This also happen with 1.1.6fix1 here.
However, if I use \mbox{\AA} instead of
On Wed, 25 Apr 2001, Allan Rae wrote:
I'll give them that one for the moment (although Maple LaTeX import
apparently works) and we've had at least two different interested groups
start some work on this but they seem to have disappeared.
Who cares about proprietary Maple ;)
What would be
Hi,
Our Department (of History in the U of Oulu, Finland) has, of course,
their own demands on the looks of things... Here are what are not quite
obvious (to me):
1. Page numbering:
First page. This is the front page. I get a page number here,
which is not good.
Second page.
Date: Wed, 25 Apr 2001 10:07:45 +0300 (EEST)
From: Tuukka Toivonen [EMAIL PROTECTED]
To: Allan Rae [EMAIL PROTECTED]
cc: LyX Users [EMAIL PROTECTED]
Subject: Re: [OT] TeXmacs? (or Maxima LyX)
On Wed, 25 Apr 2001, Allan Rae wrote:
I'll give them that one for the moment (although Maple LaTeX
On Tue, 24 Apr 2001 17:19:05 +0200 (CEST) wrote Andre Poenitz [EMAIL PROTECTED]:
4.You can use TeXmacs as an interface to computer algebra systems.
[...]
I was thinking about developing 4 for some time but a number of
circumstances have halted the project. Please mail me if
On Wed, 25 Apr 2001, Juha Siltala wrote:
Our Department (of History in the U of Oulu, Finland) has, of course,
Hello!
1. Page numbering:
First page. This is the front page. I get a page number here,
which is not good.
Use \thispagestyle{empty} in red tex on those pages.
You would get no ERT at all in LyX if reLyX was able to convert
{1}\over{\sqrt{3}} as \frac{1}{sqrt{3}}: this is more difficult...
Is it a weakness of reLyX (i.e. no implementation of math TeX constructs
in mathed ?).
That's not a job for reLyX, but for the mathed parser...
Andre'
--
So, how do you do it? ;-)
Works only with latest CVS and the patch I send yesterday to lyx-devel
and only for a very limited set of operations.
Note that this combination is not to be used for serious work. Latest
recommended version for serious work involving math is CVS from early
February,
From: [EMAIL PROTECTED]
Subject: Prevent linebreaks and pagenumbering in TOC
To: [EMAIL PROTECTED]
Date: Wed, 25 Apr 2001 10:07:37 +0200
X-MIMETrack: Serialize by Router on NNMAIL01/SRV/MAN_Nutzfahrzeuge(Release
5.0.4 |June 8, 2000) at 04/25/2001 10:07:38 AM
Hi Lyxers!
I´m a Lyx-newbie and
Stefano Ghirlanda wrote:
Matej Cepl [EMAIL PROTECTED] writes:
Wereb't there some attempts to rewrite NeXT environment for X as
a free soft (GNUStep)? As I remember, they tried to create some
kind of Display PostScript based on the Ghostscript (there are
some remaints in the
On Wed, 25 Apr 2001, Ragnar Beer wrote:
-
|1|2| - no bottom rule below cell 1
---
|3|4|
-
Set multicolumn from Tabular Layout/Cell and then use Cell/Borders.
Example attached.
#LyX 1.1 created this file. For more info see http://www.lyx.org/
\lyxformat 218
\textclass article
I'll give them that one for the moment (although Maple LaTeX import
apparently works) and we've had at least two different interested groups
start some work on this but they seem to have disappeared.
Who cares about proprietary Maple ;)
Well, I care, since that's what I am using.
The
* Jean-Pierre.Chretien [EMAIL PROTECTED], 2001-04-25 11:37 +0200:
3. Bibliography: I need to have separate sections for stuff like
sources, research, printed/electronic documents and the like. So
there should be some headings for these.
This is often required, and there exists a package to
Dear all,
I have been using lyx 1.0.1/1.0.4 for more than one year. Recently,
I had many problems with installation.
I am not sure if I can work with 1.1.6 without any problem. If not,
I'd better install 1.0.1 or 1.0.4.
Before I was working on Digital Unix. Now I changed to Sun Solaris,
probably
* [EMAIL PROTECTED] [EMAIL PROTECTED], 2001-04-25 11:37 +0200:
1. The linebreaks within words at the TOC look ugly. How can I prevent
these linebreaks in the TOC?
I tried
\mbox{ bla bla .bla}
but then, there wasn´t any linebreak at all and the line in the TOC left
the right
Thanks for everybody's input here.
Sounds like I'll have to take a gander at the source to see what the problem
is.
Lyx is 1.1.5fix2
\AA{} does not work
{\AA} does not work
only
textrm{\AA} seems to have any function at all
let me know if you all come up with anything in the meantime
brad
On
On Tue, Apr 24, 2001 at 04:54:01PM +0200, Nagy Erno wrote:
Hello!
If I set the language to hungarian (magyar) the lyx generate code like
this
\documentclass[a4paper,magyar]{article}
\usepackage[latin2]{inputenc}
\usepackage{babel}
istead of
\documentclass[a4paper,magyar]{article}
On Wed, Apr 25, 2001 at 01:59:26PM +0200, Nagy Erno wrote:
On Tue, Apr 24, 2001 at 04:54:01PM +0200, Nagy Erno wrote:
If I set the language to hungarian (magyar) the lyx generate code like
this
\documentclass[a4paper,magyar]{article}
\usepackage[latin2]{inputenc}
Wolfgang Engelmann [EMAIL PROTECTED] writes:
I am getting too many unprocessed floats in a book
A clearpage cures it and its ok after a chapter.
However, if I insert it after a section an empty page is
inserted after the figure floates have been placed, which
is undesired. How can I
Andre Berger worte:
The name is bibtopics. A different .bib file is sourced for each
topic.
The exact name is bibtopic. Get it at
ftp://ftp.dante.de/tex-archive/macros/latex/contrib/supported/bibtopic/
But notice that LyX doesn't support it by itself (yet). You need an
external script
On Wed, 25 Apr 2001, Dekel Tsur wrote:
On Tue, Apr 24, 2001 at 04:54:01PM +0200, Nagy Erno wrote:
If I set the language to hungarian (magyar) the lyx generate code like
this
\documentclass[a4paper,magyar]{article}
\usepackage[latin2]{inputenc}
\usepackage{babel}
istead of
On Wed, 25 Apr 2001 07:29:32 -0400 wrote Brad Langhorst [EMAIL PROTECTED]:
Thanks for everybody's input here.
Sounds like I'll have to take a gander at the source to see what the problem
is.
Lyx is 1.1.5fix2
\AA{} does not work
{\AA} does not work
only
textrm{\AA} seems to have any
since I upgraded to LyX 1.1.6fix1 (via rpm), LyX does not react on my
~.Xdefault setting. I had two lines telling
LyX*width: 720
LyX*height:670
As far as I know LyX does not check any .X* settings.
Andre'
--
André Pönitz . [EMAIL
It may be, but the missing \usepackage[T1]{fontenc} line is bug,
because the division of words will be wrong. Unfortunatly I can't try
it with the leatest lyx (I use it from debian package). Please sombody
(who has the current version) try it.
Do you get the 'usepackage[T1]{fontenc}'
Hi,
since I upgraded to LyX 1.1.6fix1 (via rpm), LyX does not react on my
~.Xdefault setting. I had two lines telling
LyX*width: 720
LyX*height:670
and with 1.1.5 this worked well. After looking in the man page, I changed
this to
LyX*geometry 720x670
but still no effect.
Jacek M. Holeczek [EMAIL PROTECTED] writes:
| Hi,
| I've met the following problem.
| I would need a LongTable (Table Layout - Spec. Table - Longtable)
| which is inside of a MiniPage (Layout - Paragraph Environment -
| ParagraphExtra Layout - [Minipage + Width - 100%]).
| As long as I have the
On Wed, 25 Apr 2001, Jacobo Myesrton wrote:
I think that LyX could look very good ported to MacOSX. The port should
not be very difficult. It is a matter of rewriting the GUI in Cocoa.
...not be very difficult ;-)
Complexity of porting medium-to-low, learning curve of Cocoa unknown.
Is
Have a look at jurabib: http://userpage.fu-berlin.de/~jberger/ for the
footnotes. You will find that it handles citations in footnotes in a relatively
flexible way. You can also download the bst file jachicago, which is a
modification of achicago.bst made to work with the jurabib.sty file.
4.
I think that LyX could look very good ported to MacOSX. The port should
not be very difficult. It is a matter of rewriting the GUI in Cocoa. Is
somebody working on this?
Wolfgang Engelmann wrote:
Dear Lyx-Seelsorger
what did I do wrong:
my list of figures shows correctly figure numbers numbered according to the
chapters
e.g.
2.6
2.7
etc
however in the text it is referred to as
figure 2.3.1
figure 2.3.2
I am using book style
and the
1 - 100 of 207 matches
Mail list logo
