Re: Export to ASCII
On Fri, May 24, 2002 at 03:53:01PM -0400, Matej Cepl wrote: What is the status of %subj%? Does anybody plan to improve it? The math part or in general? Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: Shortcut for closing dialog box
On Sun, 26 May 2002 19:36:06 -0400 (EDT) wrote Matej Cepl [EMAIL PROTECTED]: I am not able to find a method to close dialog box like for creating Note (from Insert/Note) or LaTeX preamble (from Layout/LaTeX layout). I use cua.bind. Where could I find, what the shortcut is? AFAIK, this is not handled by the .bind files but an xforms internal. Here I have ESC doing so, which is what I expect and like (KDE, SuSE 7.3, LyX 1.1.6). (However, the Delete-key does a Backspace in these dialogs and this is one of the reasons I eagerly wait for the reappearance of KLyX.) Günter -- [EMAIL PROTECTED]
Excel tables in lyx
I have some tables in ms excel format that I would like to use in a report in LyX. Whats the easiest way of importing or converting that data? Emil Erlandsson ___ Software Engineering student Department of Software Engineering and Computer Science Blekinge Institute of Technology
Re: Excel tables in lyx
Emil, I've never tried this, but since it is on the help site, I assume it worked for someone: http://www.lyx.org/help/table.php#excel Sachin. On Mon, 27 May 2002 [EMAIL PROTECTED] wrote: I have some tables in ms excel format that I would like to use in a report in LyX. Whats the easiest way of importing or converting that data?
Re: defaults
Juergen == Juergen Spitzmueller [EMAIL PROTECTED] writes: Juergen Again: no one took out that feature - it was never there. We Juergen decided to move the function to the document dialog, because Juergen it should be much clearer now what it does and what not. The Juergen function itself has not changed as far as I remember. The Juergen Save as Default function saves the settings of the class - Juergen those in the document dialog. Preambles et al do not belong Juergen to the class settings. We have the template stuff for that. Juergen But you can fill out a feature request on bugzilla ;-) I _think_ the preamble is saved in there. It is a document property, after all. And I think the preamble should be a new tab of the document layout popup. JMarc
Re: defaults
Jean-Marc Lasgouttes wrote: I _think_ the preamble is saved in there. It is a document property, after all. Well, I don't dare to argue against you, because you know the internals better than me ;-) It was you after all who created the function, while I only moved it into document. But actually, it seems not to be saved (at least my test did not save it). So is this a bug? And I think the preamble should be a new tab of the document layout popup. Agreed. I could even have a go if others don't object on this. Regards, Juergen JMarc
none swap
Hello all LyXers, I am facing a very strange problem here: Everytime I start LaTeX from inside of LyX-1.1.6fix4 to display my text in gv 3.5.8-13 nothings happens except a notice at the status bar at the bottom: command is executed: none swap foo.ps . So no view of output seems to be possible! This happens to help-docs as my own files as well ! Ghostscript 6.51-16 and ghostscript-fonts 5.50-3 are installed. Furthermore: When trying the same procedure from inside of LyX to display own files in the path /home/thomas/mydocs/arbeit/artikel/latest/ LaTeX is complaining about unacceptable whitespaces in path name. Does anyone have an idea how to manage this.? Thomas
Two questions from a new user
Hello,
I'm new to both LyX and LaTeX therefore please forgive me if the questions
are too obvious !
--- 1 ---
I'd like to use some features of amsTeX like the theorems environment for
example but (and have these environments appear in the pop-up in the
toolbar) BUT I prefer to use the normal book (say) class for the document
overall structure. Without LyX, I would do something like :
\documentclass[12pt,a4paper,english,french]{book}
\usepackage{amsmath}
\usepackage{amsthm}
%% etc ...
How is it possible to do such a thing WITHIN LyX while still having all the
environements in the toolbar pop-up and using latex code at least as
possible ?
--- 2 ---
I'm french and I'd like to do it all in french. But when I choose the
amsbook class, LyX seem to automatically produce this LaTeX code :
%% Textclass specific LaTeX commands.
\numberwithin{section}{chapter}
\theoremstyle{plain}
\newtheorem{thm}{Theorem}[section]
\numberwithin{equation}{section} %% Comment out for sequentially-numbered
\numberwithin{figure}{section} %% Comment out for sequentially-numbered
\theoremstyle{plain}
\newtheorem*{thm*}{Theorem}
\theoremstyle{plain}
\newtheorem*{lem*}{Lemma} %%Delete [thm] to re-start numbering
Although it is nowhere in the LaTeX preambule as LyX shows me in the menu
Format/Preambule, it _does_ appear in the preambule of my exported LaTeX
file. What I'd like to do, is to substitute Theorem for Théorème and
Lemma for Lemme. How can I do this from within LaTeX ?
Thank you !
Francis Girard
[EMAIL PROTECTED]
_
Rejoignez le plus grand service de messagerie au monde avec MSN Hotmail.
http://www.hotmail.com
long tables at the end of a ejour2 article
Hi I want to add three long tables at the end of an artcliee written in the ejour2 class. When I add these three (or more) tables there is problm with the first and second. The first is ok, then ejour prints This article was authored in LYXetc then the second follows right after without a pagebreak, even though there is not enough place on the page, and hence cuts half of the table. Then on the next page table 3 comes, and the 4 comes on the next page as they should. Have anyone an answer how to get sorted this problem without rewriting ejour2 ? Ingar -- Ingar Pareliussen tlf:73 55 12 89 Du2-185 Realfagsbygget
Importing tex file!
Hi there, I started using lyx for only one weak ago. I have generated API documentation for Java package using com.c2_tech..doclets, that produces the output in Latex format (.tex file). However, I tried to import the api.tex file, the generated .tex file, using (File - Import Latex), it gives an error Error while executing reLyX -f 'api.tex' I couldn't figure out how play around with this Error. Any helps/hints are highly appreciated. Thanks.
Exercise/Problem environment in AMS-book
How does one use the Exercise or Problem environment in AMS-book? It doesn't seem to work like the enumerate environent. If I choose the problem environment, type a problem, and then hit RETURN at the end of the problem statement, I don't get a new problem number. Thanks in advance for your help! Atul -- Atul Narang Assistant Professor Department of Chemical Engineering University of Florida Gainesville, FL 32611 PHONE: 352 392 0028 FAX: 352 392 9513 EMAIL: [EMAIL PROTECTED]
subscribe lyx
subscribe lyx
subscribe lyx
subscribe lyx
I can't install new dokument classes
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi friends and lyx users I'm using LYX 1.1.6fix4 with SuSE 8.0. I tried a dozen times to install new Document Classes , following step by step the instructions of the customization docs. The TEXMFLOCAL, TEXFM are set correctly, texhash produces the ls-R. But reconfigure is not finding the new classes. I tried it with the example from the customization doc, chapter 6.2.2 (rename, and modify a class), and with the SuSE book class. What can I do? Thank you very much! Eddie - -- - -- Meine Schlüssel sind zu finden: - -- http://pgp.zdv.uni-mainz.de/keyserver/ http://www.keyserver.net/en/ -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iEYEARECAAYFAjzyl94ACgkQaXNVppfGXfonLQCdGZAFqHAGeu44F2xMUy5OEt6r 39wAn0pCQMfw5clBKLHjBBdX4D84iQ9I =9VeV -END PGP SIGNATURE-
LyX and OpenBSD 3.0
Until recently LyX was included as in the list of packages for OpenBSD 3.0 (lyx-1.1.6fix4.tgz). I can not seem to find it. Does anyone in this list know where I can get lyx for OpenBSD, or am I going to have to get adventerous and compile it from the source? Kent Kostuk
CJK-LyX-1.2.0
Hello, Since there's been no official announcement of lyx-1.2.0 yet, I cannot announce CJK-LyX-1.2.0 now, right? So, this is for those who want to try CJK-LyX-1.2.0 before the announcement? Anyhow, you can download them at the usual ftp site, ftp://stone.phys.pusan.ac.kr/pub/CJK-LyX ---cghan
Re: Export to ASCII
On Fri, May 24, 2002 at 03:53:01PM -0400, Matej Cepl wrote: What is the status of %subj%? Does anybody plan to improve it? The math part or in general? Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: Shortcut for closing dialog box
On Sun, 26 May 2002 19:36:06 -0400 (EDT) wrote Matej Cepl [EMAIL PROTECTED]: I am not able to find a method to close dialog box like for creating Note (from Insert/Note) or LaTeX preamble (from Layout/LaTeX layout). I use cua.bind. Where could I find, what the shortcut is? AFAIK, this is not handled by the .bind files but an xforms internal. Here I have ESC doing so, which is what I expect and like (KDE, SuSE 7.3, LyX 1.1.6). (However, the Delete-key does a Backspace in these dialogs and this is one of the reasons I eagerly wait for the reappearance of KLyX.) Günter -- [EMAIL PROTECTED]
Excel tables in lyx
I have some tables in ms excel format that I would like to use in a report in LyX. Whats the easiest way of importing or converting that data? Emil Erlandsson ___ Software Engineering student Department of Software Engineering and Computer Science Blekinge Institute of Technology
Re: Excel tables in lyx
Emil, I've never tried this, but since it is on the help site, I assume it worked for someone: http://www.lyx.org/help/table.php#excel Sachin. On Mon, 27 May 2002 [EMAIL PROTECTED] wrote: I have some tables in ms excel format that I would like to use in a report in LyX. Whats the easiest way of importing or converting that data?
Re: defaults
Juergen == Juergen Spitzmueller [EMAIL PROTECTED] writes: Juergen Again: no one took out that feature - it was never there. We Juergen decided to move the function to the document dialog, because Juergen it should be much clearer now what it does and what not. The Juergen function itself has not changed as far as I remember. The Juergen Save as Default function saves the settings of the class - Juergen those in the document dialog. Preambles et al do not belong Juergen to the class settings. We have the template stuff for that. Juergen But you can fill out a feature request on bugzilla ;-) I _think_ the preamble is saved in there. It is a document property, after all. And I think the preamble should be a new tab of the document layout popup. JMarc
Re: defaults
Jean-Marc Lasgouttes wrote: I _think_ the preamble is saved in there. It is a document property, after all. Well, I don't dare to argue against you, because you know the internals better than me ;-) It was you after all who created the function, while I only moved it into document. But actually, it seems not to be saved (at least my test did not save it). So is this a bug? And I think the preamble should be a new tab of the document layout popup. Agreed. I could even have a go if others don't object on this. Regards, Juergen JMarc
none swap
Hello all LyXers, I am facing a very strange problem here: Everytime I start LaTeX from inside of LyX-1.1.6fix4 to display my text in gv 3.5.8-13 nothings happens except a notice at the status bar at the bottom: command is executed: none swap foo.ps . So no view of output seems to be possible! This happens to help-docs as my own files as well ! Ghostscript 6.51-16 and ghostscript-fonts 5.50-3 are installed. Furthermore: When trying the same procedure from inside of LyX to display own files in the path /home/thomas/mydocs/arbeit/artikel/latest/ LaTeX is complaining about unacceptable whitespaces in path name. Does anyone have an idea how to manage this.? Thomas
Two questions from a new user
Hello,
I'm new to both LyX and LaTeX therefore please forgive me if the questions
are too obvious !
--- 1 ---
I'd like to use some features of amsTeX like the theorems environment for
example but (and have these environments appear in the pop-up in the
toolbar) BUT I prefer to use the normal book (say) class for the document
overall structure. Without LyX, I would do something like :
\documentclass[12pt,a4paper,english,french]{book}
\usepackage{amsmath}
\usepackage{amsthm}
%% etc ...
How is it possible to do such a thing WITHIN LyX while still having all the
environements in the toolbar pop-up and using latex code at least as
possible ?
--- 2 ---
I'm french and I'd like to do it all in french. But when I choose the
amsbook class, LyX seem to automatically produce this LaTeX code :
%% Textclass specific LaTeX commands.
\numberwithin{section}{chapter}
\theoremstyle{plain}
\newtheorem{thm}{Theorem}[section]
\numberwithin{equation}{section} %% Comment out for sequentially-numbered
\numberwithin{figure}{section} %% Comment out for sequentially-numbered
\theoremstyle{plain}
\newtheorem*{thm*}{Theorem}
\theoremstyle{plain}
\newtheorem*{lem*}{Lemma} %%Delete [thm] to re-start numbering
Although it is nowhere in the LaTeX preambule as LyX shows me in the menu
Format/Preambule, it _does_ appear in the preambule of my exported LaTeX
file. What I'd like to do, is to substitute Theorem for Théorème and
Lemma for Lemme. How can I do this from within LaTeX ?
Thank you !
Francis Girard
[EMAIL PROTECTED]
_
Rejoignez le plus grand service de messagerie au monde avec MSN Hotmail.
http://www.hotmail.com
long tables at the end of a ejour2 article
Hi I want to add three long tables at the end of an artcliee written in the ejour2 class. When I add these three (or more) tables there is problm with the first and second. The first is ok, then ejour prints This article was authored in LYXetc then the second follows right after without a pagebreak, even though there is not enough place on the page, and hence cuts half of the table. Then on the next page table 3 comes, and the 4 comes on the next page as they should. Have anyone an answer how to get sorted this problem without rewriting ejour2 ? Ingar -- Ingar Pareliussen tlf:73 55 12 89 Du2-185 Realfagsbygget
Importing tex file!
Hi there, I started using lyx for only one weak ago. I have generated API documentation for Java package using com.c2_tech..doclets, that produces the output in Latex format (.tex file). However, I tried to import the api.tex file, the generated .tex file, using (File - Import Latex), it gives an error Error while executing reLyX -f 'api.tex' I couldn't figure out how play around with this Error. Any helps/hints are highly appreciated. Thanks.
Exercise/Problem environment in AMS-book
How does one use the Exercise or Problem environment in AMS-book? It doesn't seem to work like the enumerate environent. If I choose the problem environment, type a problem, and then hit RETURN at the end of the problem statement, I don't get a new problem number. Thanks in advance for your help! Atul -- Atul Narang Assistant Professor Department of Chemical Engineering University of Florida Gainesville, FL 32611 PHONE: 352 392 0028 FAX: 352 392 9513 EMAIL: [EMAIL PROTECTED]
subscribe lyx
subscribe lyx
subscribe lyx
subscribe lyx
I can't install new dokument classes
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi friends and lyx users I'm using LYX 1.1.6fix4 with SuSE 8.0. I tried a dozen times to install new Document Classes , following step by step the instructions of the customization docs. The TEXMFLOCAL, TEXFM are set correctly, texhash produces the ls-R. But reconfigure is not finding the new classes. I tried it with the example from the customization doc, chapter 6.2.2 (rename, and modify a class), and with the SuSE book class. What can I do? Thank you very much! Eddie - -- - -- Meine Schlüssel sind zu finden: - -- http://pgp.zdv.uni-mainz.de/keyserver/ http://www.keyserver.net/en/ -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iEYEARECAAYFAjzyl94ACgkQaXNVppfGXfonLQCdGZAFqHAGeu44F2xMUy5OEt6r 39wAn0pCQMfw5clBKLHjBBdX4D84iQ9I =9VeV -END PGP SIGNATURE-
LyX and OpenBSD 3.0
Until recently LyX was included as in the list of packages for OpenBSD 3.0 (lyx-1.1.6fix4.tgz). I can not seem to find it. Does anyone in this list know where I can get lyx for OpenBSD, or am I going to have to get adventerous and compile it from the source? Kent Kostuk
CJK-LyX-1.2.0
Hello, Since there's been no official announcement of lyx-1.2.0 yet, I cannot announce CJK-LyX-1.2.0 now, right? So, this is for those who want to try CJK-LyX-1.2.0 before the announcement? Anyhow, you can download them at the usual ftp site, ftp://stone.phys.pusan.ac.kr/pub/CJK-LyX ---cghan
Re: Export to ASCII
On Fri, May 24, 2002 at 03:53:01PM -0400, Matej Cepl wrote: > What is the status of %subj%? Does anybody plan to improve it? The math part or in general? Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: Shortcut for closing dialog box
On Sun, 26 May 2002 19:36:06 -0400 (EDT) wrote Matej Cepl <[EMAIL PROTECTED]>: > I am not able to find a method to close dialog box like for > creating Note (from Insert/Note) or LaTeX preamble (from > Layout/LaTeX layout). I use cua.bind. Where could I find, what > the shortcut is? AFAIK, this is not handled by the .bind files but an xforms internal. Here I have ESC doing so, which is what I expect and like (KDE, SuSE 7.3, LyX 1.1.6). (However, the Delete-key does a Backspace in these dialogs and this is one of the reasons I eagerly wait for the reappearance of KLyX.) Günter -- [EMAIL PROTECTED]
Excel tables in lyx
I have some tables in ms excel format that I would like to use in a report in LyX. Whats the easiest way of importing or converting that data? Emil Erlandsson ___ Software Engineering student Department of Software Engineering and Computer Science Blekinge Institute of Technology
Re: Excel tables in lyx
Emil, I've never tried this, but since it is on the help site, I assume it worked for someone: http://www.lyx.org/help/table.php#excel Sachin. On Mon, 27 May 2002 [EMAIL PROTECTED] wrote: > I have some tables in ms excel format that I would like to use in a > report in LyX. Whats the easiest way of importing or converting that > data?
Re: defaults
> "Juergen" == Juergen Spitzmueller <[EMAIL PROTECTED]> writes: Juergen> Again: no one took out that feature - it was never there. We Juergen> decided to move the function to the document dialog, because Juergen> it should be much clearer now what it does and what not. The Juergen> function itself has not changed as far as I remember. The Juergen> "Save as Default" function saves the settings of the class - Juergen> those in the document dialog. Preambles et al do not belong Juergen> to the class settings. We have the template stuff for that. Juergen> But you can fill out a feature request on bugzilla ;-) I _think_ the preamble is saved in there. It is a document property, after all. And I think the preamble should be a new tab of the document layout popup. JMarc
Re: defaults
Jean-Marc Lasgouttes wrote: > I _think_ the preamble is saved in there. It is a document property, > after all. Well, I don't dare to argue against you, because you know the internals better than me ;-) It was you after all who created the function, while I only moved it into document. But actually, it seems not to be saved (at least my test did not save it). So is this a bug? > And I think the preamble should be a new tab of the > document layout popup. Agreed. I could even have a go if others don't object on this. Regards, Juergen > JMarc
none swap
Hello all LyXers, I am facing a very strange problem here: Everytime I start LaTeX from inside of LyX-1.1.6fix4 to display my text in gv 3.5.8-13 nothings happens except a notice at the status bar at the bottom: command is executed: "none swap foo.ps ". So no view of output seems to be possible! This happens to help-docs as my own files as well ! Ghostscript 6.51-16 and ghostscript-fonts 5.50-3 are installed. Furthermore: When trying the same procedure from inside of LyX to display own files in the path /home/thomas/mydocs/arbeit/artikel/latest/ LaTeX is complaining about unacceptable whitespaces in path name. Does anyone have an idea how to manage this.? Thomas
Two questions from a new user
Hello,
I'm new to both LyX and LaTeX therefore please forgive me if the questions
are too obvious !
--- 1 ---
I'd like to use some features of amsTeX like the theorems environment for
example but (and have these environments appear in the pop-up in the
toolbar) BUT I prefer to use the normal book (say) class for the document
overall structure. Without LyX, I would do something like :
\documentclass[12pt,a4paper,english,french]{book}
\usepackage{amsmath}
\usepackage{amsthm}
%% etc ...
How is it possible to do such a thing WITHIN LyX while still having all the
environements in the toolbar pop-up and using latex code at least as
possible ?
--- 2 ---
I'm french and I'd like to do it all in french. But when I choose the
amsbook class, LyX seem to automatically produce this LaTeX code :
%% Textclass specific LaTeX commands.
\numberwithin{section}{chapter}
\theoremstyle{plain}
\newtheorem{thm}{Theorem}[section]
\numberwithin{equation}{section} %% Comment out for sequentially-numbered
\numberwithin{figure}{section} %% Comment out for sequentially-numbered
\theoremstyle{plain}
\newtheorem*{thm*}{Theorem}
\theoremstyle{plain}
\newtheorem*{lem*}{Lemma} %%Delete [thm] to re-start numbering
Although it is nowhere in the LaTeX preambule as LyX shows me in the menu
Format/Preambule, it _does_ appear in the preambule of my exported LaTeX
file. What I'd like to do, is to substitute "Theorem" for "Théorème" and
"Lemma" for "Lemme". How can I do this from within LaTeX ?
Thank you !
Francis Girard
[EMAIL PROTECTED]
_
Rejoignez le plus grand service de messagerie au monde avec MSN Hotmail.
http://www.hotmail.com
long tables at the end of a ejour2 article
Hi I want to add three long tables at the end of an artcliee written in the ejour2 class. When I add these three (or more) tables there is problm with the first and second. The first is ok, then ejour prints "This article was authored in LYXetc" then the second follows right after without a pagebreak, even though there is not enough place on the page, and hence cuts half of the table. Then on the next page table 3 comes, and the 4 comes on the next page as they should. Have anyone an answer how to get sorted this problem without rewriting ejour2 ? Ingar -- Ingar Pareliussen tlf:73 55 12 89 Du2-185 Realfagsbygget
Importing tex file!
Hi there, I started using lyx for only one weak ago. I have generated API documentation for Java package using com.c2_tech..doclets, that produces the output in Latex format (.tex file). However, I tried to import the api.tex file, the generated .tex file, using (File -> Import Latex), it gives an error Error while executing reLyX -f 'api.tex' I couldn't figure out how play around with this Error. Any helps/hints are highly appreciated. Thanks.
Exercise/Problem environment in AMS-book
How does one use the Exercise or Problem environment in AMS-book? It doesn't seem to work like the enumerate environent. If I choose the problem environment, type a problem, and then hit RETURN at the end of the problem statement, I don't get a new problem number. Thanks in advance for your help! Atul -- Atul Narang Assistant Professor Department of Chemical Engineering University of Florida Gainesville, FL 32611 PHONE: 352 392 0028 FAX: 352 392 9513 EMAIL: [EMAIL PROTECTED]
subscribe lyx
subscribe lyx
subscribe lyx
subscribe lyx
I can't install new dokument classes
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi friends and lyx users I'm using LYX 1.1.6fix4 with SuSE 8.0. I tried a dozen times to install new Document Classes , following step by step the instructions of the customization docs. The TEXMFLOCAL, TEXFM are set correctly, texhash produces the ls-R. But reconfigure is not finding the new classes. I tried it with the example from the customization doc, chapter 6.2.2 (rename, and modify a class), and with the SuSE book class. What can I do? Thank you very much! Eddie - -- - -- Meine Schlüssel sind zu finden: - -- http://pgp.zdv.uni-mainz.de/keyserver/ http://www.keyserver.net/en/ -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iEYEARECAAYFAjzyl94ACgkQaXNVppfGXfonLQCdGZAFqHAGeu44F2xMUy5OEt6r 39wAn0pCQMfw5clBKLHjBBdX4D84iQ9I =9VeV -END PGP SIGNATURE-
LyX and OpenBSD 3.0
Until recently LyX was included as in the list of packages for OpenBSD 3.0 (lyx-1.1.6fix4.tgz). I can not seem to find it. Does anyone in this list know where I can get lyx for OpenBSD, or am I going to have to get adventerous and compile it from the source? Kent Kostuk
CJK-LyX-1.2.0
Hello, Since there's been no official announcement of lyx-1.2.0 yet, I cannot announce CJK-LyX-1.2.0 now, right? So, this is for those who want to try CJK-LyX-1.2.0 before the announcement? Anyhow, you can download "them" at the usual ftp site, ftp://stone.phys.pusan.ac.kr/pub/CJK-LyX ---cghan
