I'd love to be able to do that but I am so far not a C++ programmer.
Mainly using fortran 95 for my research. I'm familiar with C syntax and
know a little bit about object oriented languageas, but I have no
experience in developing for large projects. I guess downloading Lyx
sources and start
I try to use LyX with hebrew support on Win2k english (as described at
http://www.math.tau.ac.il/~dekelts/lyx/instructions2.html).
It works well, but the Right-to-left support doesn't work. It does
displays hebrew letters, and the WORDS are displayed
correctly (right-to-left), but the letters
Hello to all,
Sorry to bother you all. I conversion works both with windows native or
cygwin Imagemagick. I had to add an explicit converter in the
preferences, either to use the cygwin or the windows Imagemagick.
If not the qt 1.3.2 lyx was looking for the
Hello,
I am not sure if this is what you are looking for. It seems to me if Lyx
does not find a defined converters for a certain image format it tries
to use the convertDefault.sh. For me this causes windows xp to pop up a
dialog to specify the program to execute the shell script. To avoid
Sorry to make this silly question, but I'm writing a paper containing
crystallographic notations using LyX and I need the symbol for parallel
planes or directions (//, i.e. two slash bars, but spaced closer than
normal), I already looked at the AMS-LaTeX documentation, but couldn't
find this
Hi jorgen,
I am not sure if this is what you are looking for. It seems to me if Lyx
does not find a defined converters for a certain image format it tries
to use the convertDefault.sh. For me this causes windows xp to pop up a
dialog to specify the program to execute the shell script. To
On Thu, 11 Sep 2003, Cláudio Geraldo Schön wrote:
Sorry to make this silly question, but I'm writing a paper containing
crystallographic notations using LyX and I need the symbol for parallel
planes or directions (//, i.e. two slash bars, but spaced closer than
normal), I already looked at
On Thu, Sep 11, 2003 at 03:02:24PM -0300, Cl?udio Geraldo Sch?n wrote:
Sorry to make this silly question, but I'm writing a paper containing
crystallographic notations using LyX and I need the symbol for parallel
planes or directions (//, i.e. two slash bars, but spaced closer than
normal), I
On Thu, Sep 04, 2003 at 07:42:25PM +0200, David Jutier wrote:
Is it possible to configure the language for the cross references from
english to french, to have, as an exemple, figure 2.1 page suivante
instead of figure 2.1 on the following page in the resulting document
?
This is done
On Fri, Sep 05, 2003 at 11:50:38AM +0100, Gareth Jenkins wrote:
Hi
I having a problem generating my bibliography and tables of contents
from lyx 1.3.2 qt (on SuSE 8.2) as latex only appears to be called once.
Eg. when I viewdvi, I get no bibliography file generated, just the tex
and aux
In the past, I have used a book document class with a custom page size of
9 X 5.5.
But lately, when viewed with gv the document is cropped. (The right side
is missing a couple inches of text.)
I saw some postings at
http://www.mail-archive.com/[EMAIL PROTECTED]/msg05891.html
from 1999, that
I have inserted figures in a book by first inserting a figure-float then
placing the graphic inside this. In both cases (so far only two figures
inserted), I have the scale set at 50% for each, but they show up in the
pdflatex output along the left side of the body area of the page. The
caption
highlight the image then go layout paragraph then select center.
I belive you can automaticly centre all images but putting something in
the preamble but cant remember what it is now. Have a bit of a look in
the past postings
cheers
Owen
Rich Shepard wrote:
I have inserted figures in a book
On Fri, 12 Sep 2003, Owen Lucas wrote:
highlight the image then go layout paragraph then select center.
Thanks, Owen. I received a private reply with the same solution. As I had
not needed to do this before I never went rummaging through the menus.
Ciao,
Rich
Dr. Richard B. Shepard,
Rich Shepard [EMAIL PROTECTED] writes:
| On Fri, 12 Sep 2003, Owen Lucas wrote:
highlight the image then go layout paragraph then select center.
| Thanks, Owen. I received a private reply with the same solution. As I had
| not needed to do this before I never went rummaging through the
|
On Fri, 12 Sep 2003, Lars Gullik Bjønnes wrote:
In some earlier verision of LyX centering of graphics was done
automatically, however we (or was it I) changed this since this is not
the default in LaTeX.
Lars,
Any way it's done is fine with me, as long as I can get what I want from
it. I
Writing in book class, do I need to do more than invoke math mode to have
the equations properly formatted on screen as well as on paper? I use the
\sub, \textperiodcentered and \sup within math mode (invoking TeX mode, of
course), but all I see is the text run together, not the symbols.
On a
Hello Ben,
I am not sure if I can help you with this.
I tested with and witout specifying a converter.
Below are 2 snippets.
In either case I don't get any message about ghostscript being called as
you get..? (Does this depend on the debug setting? I start lyx with -dbg
graphics)
When I
forgot:
If execute the line which gives me the error in the lyx debug
sh C:/lyx/share/lyx/scripts/convertDefault.sh
eps:F:/chapters/fig/exp/rose.eps
ppm:C:/cygwin/tmp/lyx_tmpdir2468a02816/rose2468a02816.ppm
in a command window the figure is converted correctly. Strange?
jorgen
Owen Lucas schrieb:
highlight the image then go layout paragraph then select center.
this is the wrong way, because you'll get some more
vertical space between image and caption which does
not look fine. This space comes from the environment
center.
Use instead as first line in the float
Rich Shepard schrieb:
I've searched both the users guide and advanced features guide for 1.3.2
without finding the answer to this question: how do I number figures
consecutively in a book class?
search the mail archive
The default (when I place the figure in a figure float) is to number them
Michael Chabon schrieb:
I have been using Lyx for about five days and am up and running okay.
I am trying to produce a long manuscript that incorporates many, many
marginal notes, many of them very long (i.e., more than a page). Right
now I'm using Word and its text boxes to do this, and it's
Rich Shepard schrieb:
Writing in book class, do I need to do more than invoke math mode to have
the equations properly formatted on screen as well as on paper? I use the
\sub, \textperiodcentered and \sup within math mode (invoking TeX mode, of
course), but all I see is the text run together,
On a related issue, if want to put spaces in the equation, pressing the
space bar moves the cursor out the right side. I don't know what I've
missed here.
I think you have to use the Insert Space Buttom from the Math Panel. You can
chose from thin, medium and thick spaces, etc. Or just
Lars Gullik Bjønnes schrieb:
Rich Shepard [EMAIL PROTECTED] writes:
| On Fri, 12 Sep 2003, Owen Lucas wrote:
highlight the image then go layout paragraph then select center.
| Thanks, Owen. I received a private reply with the same solution. As I had
| not needed to do this before I never went
Rich Shepard schrieb:
Writing in book class, do I need to do more than invoke math mode to have
the equations properly formatted on screen as well as on paper? I use the
\sub, \textperiodcentered and \sup within math mode (invoking TeX mode, of
course), but all I see is the text run together,
I'd love to be able to do that but I am so far not a C++ programmer.
Mainly using fortran 95 for my research. I'm familiar with C syntax and
know a little bit about object oriented languageas, but I have no
experience in developing for large projects. I guess downloading Lyx
sources and start
I try to use LyX with hebrew support on Win2k english (as described at
http://www.math.tau.ac.il/~dekelts/lyx/instructions2.html).
It works well, but the Right-to-left support doesn't work. It does
displays hebrew letters, and the WORDS are displayed
correctly (right-to-left), but the letters
Hello to all,
Sorry to bother you all. I conversion works both with windows native or
cygwin Imagemagick. I had to add an explicit converter in the
preferences, either to use the cygwin or the windows Imagemagick.
If not the qt 1.3.2 lyx was looking for the
Hello,
I am not sure if this is what you are looking for. It seems to me if Lyx
does not find a defined converters for a certain image format it tries
to use the convertDefault.sh. For me this causes windows xp to pop up a
dialog to specify the program to execute the shell script. To avoid
Sorry to make this silly question, but I'm writing a paper containing
crystallographic notations using LyX and I need the symbol for parallel
planes or directions (//, i.e. two slash bars, but spaced closer than
normal), I already looked at the AMS-LaTeX documentation, but couldn't
find this
Hi jorgen,
I am not sure if this is what you are looking for. It seems to me if Lyx
does not find a defined converters for a certain image format it tries
to use the convertDefault.sh. For me this causes windows xp to pop up a
dialog to specify the program to execute the shell script. To
On Thu, 11 Sep 2003, Cláudio Geraldo Schön wrote:
Sorry to make this silly question, but I'm writing a paper containing
crystallographic notations using LyX and I need the symbol for parallel
planes or directions (//, i.e. two slash bars, but spaced closer than
normal), I already looked at
On Thu, Sep 11, 2003 at 03:02:24PM -0300, Cl?udio Geraldo Sch?n wrote:
Sorry to make this silly question, but I'm writing a paper containing
crystallographic notations using LyX and I need the symbol for parallel
planes or directions (//, i.e. two slash bars, but spaced closer than
normal), I
On Thu, Sep 04, 2003 at 07:42:25PM +0200, David Jutier wrote:
Is it possible to configure the language for the cross references from
english to french, to have, as an exemple, figure 2.1 page suivante
instead of figure 2.1 on the following page in the resulting document
?
This is done
On Fri, Sep 05, 2003 at 11:50:38AM +0100, Gareth Jenkins wrote:
Hi
I having a problem generating my bibliography and tables of contents
from lyx 1.3.2 qt (on SuSE 8.2) as latex only appears to be called once.
Eg. when I viewdvi, I get no bibliography file generated, just the tex
and aux
In the past, I have used a book document class with a custom page size of
9 X 5.5.
But lately, when viewed with gv the document is cropped. (The right side
is missing a couple inches of text.)
I saw some postings at
http://www.mail-archive.com/[EMAIL PROTECTED]/msg05891.html
from 1999, that
I have inserted figures in a book by first inserting a figure-float then
placing the graphic inside this. In both cases (so far only two figures
inserted), I have the scale set at 50% for each, but they show up in the
pdflatex output along the left side of the body area of the page. The
caption
highlight the image then go layout paragraph then select center.
I belive you can automaticly centre all images but putting something in
the preamble but cant remember what it is now. Have a bit of a look in
the past postings
cheers
Owen
Rich Shepard wrote:
I have inserted figures in a book
On Fri, 12 Sep 2003, Owen Lucas wrote:
highlight the image then go layout paragraph then select center.
Thanks, Owen. I received a private reply with the same solution. As I had
not needed to do this before I never went rummaging through the menus.
Ciao,
Rich
Dr. Richard B. Shepard,
Rich Shepard [EMAIL PROTECTED] writes:
| On Fri, 12 Sep 2003, Owen Lucas wrote:
highlight the image then go layout paragraph then select center.
| Thanks, Owen. I received a private reply with the same solution. As I had
| not needed to do this before I never went rummaging through the
|
On Fri, 12 Sep 2003, Lars Gullik Bjønnes wrote:
In some earlier verision of LyX centering of graphics was done
automatically, however we (or was it I) changed this since this is not
the default in LaTeX.
Lars,
Any way it's done is fine with me, as long as I can get what I want from
it. I
Writing in book class, do I need to do more than invoke math mode to have
the equations properly formatted on screen as well as on paper? I use the
\sub, \textperiodcentered and \sup within math mode (invoking TeX mode, of
course), but all I see is the text run together, not the symbols.
On a
Hello Ben,
I am not sure if I can help you with this.
I tested with and witout specifying a converter.
Below are 2 snippets.
In either case I don't get any message about ghostscript being called as
you get..? (Does this depend on the debug setting? I start lyx with -dbg
graphics)
When I
forgot:
If execute the line which gives me the error in the lyx debug
sh C:/lyx/share/lyx/scripts/convertDefault.sh
eps:F:/chapters/fig/exp/rose.eps
ppm:C:/cygwin/tmp/lyx_tmpdir2468a02816/rose2468a02816.ppm
in a command window the figure is converted correctly. Strange?
jorgen
Owen Lucas schrieb:
highlight the image then go layout paragraph then select center.
this is the wrong way, because you'll get some more
vertical space between image and caption which does
not look fine. This space comes from the environment
center.
Use instead as first line in the float
Rich Shepard schrieb:
I've searched both the users guide and advanced features guide for 1.3.2
without finding the answer to this question: how do I number figures
consecutively in a book class?
search the mail archive
The default (when I place the figure in a figure float) is to number them
Michael Chabon schrieb:
I have been using Lyx for about five days and am up and running okay.
I am trying to produce a long manuscript that incorporates many, many
marginal notes, many of them very long (i.e., more than a page). Right
now I'm using Word and its text boxes to do this, and it's
Rich Shepard schrieb:
Writing in book class, do I need to do more than invoke math mode to have
the equations properly formatted on screen as well as on paper? I use the
\sub, \textperiodcentered and \sup within math mode (invoking TeX mode, of
course), but all I see is the text run together,
On a related issue, if want to put spaces in the equation, pressing the
space bar moves the cursor out the right side. I don't know what I've
missed here.
I think you have to use the Insert Space Buttom from the Math Panel. You can
chose from thin, medium and thick spaces, etc. Or just
Lars Gullik Bjønnes schrieb:
Rich Shepard [EMAIL PROTECTED] writes:
| On Fri, 12 Sep 2003, Owen Lucas wrote:
highlight the image then go layout paragraph then select center.
| Thanks, Owen. I received a private reply with the same solution. As I had
| not needed to do this before I never went
Rich Shepard schrieb:
Writing in book class, do I need to do more than invoke math mode to have
the equations properly formatted on screen as well as on paper? I use the
\sub, \textperiodcentered and \sup within math mode (invoking TeX mode, of
course), but all I see is the text run together,
I'd love to be able to do that but I am so far not a C++ programmer.
Mainly using fortran 95 for my research. I'm familiar with C syntax and
know a little bit about object oriented languageas, but I have no
experience in developing for large projects. I guess downloading Lyx
sources and start
I try to use LyX with hebrew support on Win2k english (as described at
http://www.math.tau.ac.il/~dekelts/lyx/instructions2.html).
It works well, but the Right-to-left support doesn't work. It does
displays hebrew letters, and the WORDS are displayed
correctly (right-to-left), but the letters
Hello to all,
> Sorry to bother you all. I conversion works both with windows native or
> cygwin Imagemagick. I had to add an explicit converter in the
> preferences, either to use the cygwin or the windows Imagemagick.
> If not the qt 1.3.2 lyx was looking for the
>
Hello,
I am not sure if this is what you are looking for. It seems to me if Lyx
does not find a defined converters for a certain image format it tries
to use the convertDefault.sh. For me this causes windows xp to pop up a
dialog to specify the program to execute the shell script. To avoid
Sorry to make this silly question, but I'm writing a paper containing
crystallographic notations using LyX and I need the symbol for parallel
planes or directions ("//", i.e. two slash bars, but spaced closer than
normal), I already looked at the AMS-LaTeX documentation, but couldn't
find this
Hi jorgen,
> I am not sure if this is what you are looking for. It seems to me if Lyx
> does not find a defined converters for a certain image format it tries
> to use the convertDefault.sh. For me this causes windows xp to pop up a
> dialog to specify the program to execute the shell script. To
On Thu, 11 Sep 2003, Cláudio Geraldo Schön wrote:
> Sorry to make this silly question, but I'm writing a paper containing
> crystallographic notations using LyX and I need the symbol for parallel
> planes or directions ("//", i.e. two slash bars, but spaced closer than
> normal), I already looked
On Thu, Sep 11, 2003 at 03:02:24PM -0300, Cl?udio Geraldo Sch?n wrote:
> Sorry to make this silly question, but I'm writing a paper containing
> crystallographic notations using LyX and I need the symbol for parallel
> planes or directions ("//", i.e. two slash bars, but spaced closer than
>
On Thu, Sep 04, 2003 at 07:42:25PM +0200, David Jutier wrote:
> Is it possible to configure the language for the cross references from
> english to french, to have, as an exemple, "figure 2.1 page suivante"
> instead of "figure 2.1 on the following page" in the resulting document
> ?
This is done
On Fri, Sep 05, 2003 at 11:50:38AM +0100, Gareth Jenkins wrote:
> Hi
>
> I having a problem generating my bibliography and tables of contents
> from lyx 1.3.2 qt (on SuSE 8.2) as latex only appears to be called once.
> Eg. when I view>dvi, I get no bibliography file generated, just the tex
>
In the past, I have used a book document class with a custom page size of
9" X 5.5".
But lately, when viewed with gv the document is cropped. (The right side
is missing a couple inches of text.)
I saw some postings at
http://www.mail-archive.com/[EMAIL PROTECTED]/msg05891.html
from 1999, that
I have inserted figures in a book by first inserting a figure-float then
placing the graphic inside this. In both cases (so far only two figures
inserted), I have the scale set at 50% for each, but they show up in the
pdflatex output along the left side of the body area of the page. The
caption
highlight the image then go layout paragraph then select center.
I belive you can automaticly centre all images but putting something in
the preamble but cant remember what it is now. Have a bit of a look in
the past postings
cheers
Owen
Rich Shepard wrote:
I have inserted figures in a book
On Fri, 12 Sep 2003, Owen Lucas wrote:
> highlight the image then go layout paragraph then select center.
Thanks, Owen. I received a private reply with the same solution. As I had
not needed to do this before I never went rummaging through the menus.
Ciao,
Rich
Dr. Richard B. Shepard,
Rich Shepard <[EMAIL PROTECTED]> writes:
| On Fri, 12 Sep 2003, Owen Lucas wrote:
>
>> highlight the image then go layout paragraph then select center.
>
| Thanks, Owen. I received a private reply with the same solution. As I had
| not needed to do this before I never went rummaging through the
On Fri, 12 Sep 2003, Lars Gullik Bjønnes wrote:
> In some earlier verision of LyX centering of graphics was done
> automatically, however we (or was it I) changed this since this is not
> the default in LaTeX.
Lars,
Any way it's done is fine with me, as long as I can get what I want from
it.
Writing in book class, do I need to do more than invoke math mode to have
the equations properly formatted on screen as well as on paper? I use the
\sub, \textperiodcentered and \sup within math mode (invoking TeX mode, of
course), but all I see is the text run together, not the symbols.
On a
Hello Ben,
I am not sure if I can help you with this.
I tested with and witout specifying a converter.
Below are 2 snippets.
In either case I don't get any message about ghostscript being called as
you get..? (Does this depend on the debug setting? I start lyx with -dbg
graphics)
When I
forgot:
If execute the line which gives me the error in the lyx debug
sh C:/lyx/share/lyx/scripts/convertDefault.sh
eps:F:/chapters/fig/exp/rose.eps
ppm:C:/cygwin/tmp/lyx_tmpdir2468a02816/rose2468a02816.ppm
in a command window the figure is converted correctly. Strange?
jorgen
Owen Lucas schrieb:
highlight the image then go layout paragraph then select center.
this is the wrong way, because you'll get some more
vertical space between image and caption which does
not look fine. This space comes from the environment
center.
Use instead as first line in the float
Rich Shepard schrieb:
I've searched both the users guide and advanced features guide for 1.3.2
without finding the answer to this question: how do I number figures
consecutively in a book class?
search the mail archive
The default (when I place the figure in a figure float) is to number them
Michael Chabon schrieb:
I have been using Lyx for about five days and am up and running okay.
I am trying to produce a long manuscript that incorporates many, many
marginal notes, many of them very long (i.e., more than a page). Right
now I'm using Word and its text boxes to do this, and it's
Rich Shepard schrieb:
Writing in book class, do I need to do more than invoke math mode to have
the equations properly formatted on screen as well as on paper? I use the
\sub, \textperiodcentered and \sup within math mode (invoking TeX mode, of
course), but all I see is the text run together,
> On a related issue, if want to put spaces in the equation, pressing the
> space bar moves the cursor out the right side. I don't know what I've
> missed here.
I think you have to use the Insert Space Buttom from the Math Panel. You can
chose from thin, medium and thick spaces, etc. Or just
Lars Gullik Bjønnes schrieb:
Rich Shepard <[EMAIL PROTECTED]> writes:
| On Fri, 12 Sep 2003, Owen Lucas wrote:
highlight the image then go layout paragraph then select center.
| Thanks, Owen. I received a private reply with the same solution. As I had
| not needed to do this before I never
Rich Shepard schrieb:
Writing in book class, do I need to do more than invoke math mode to have
the equations properly formatted on screen as well as on paper? I use the
\sub, \textperiodcentered and \sup within math mode (invoking TeX mode, of
course), but all I see is the text run together,
78 matches
Mail list logo
