I get the following error whenever I try to use natbib in my current
document (It does not happen if I start a clean document though):
[1] [1] (./thesis3nobib.toc [2] [3]
! Undefined control sequence.
[EMAIL PROTECTED] -[EMAIL PROTECTED]
l.96 ...aphy}}\endgroup }}}\mark {}\endgroup }{61}
On Wed, Oct 08, 2003 at 04:03:09PM +0100, Paul Smith wrote:
For instance, with SWP, if you insert the LaTeX code $x=y$, saving and
closing the file, then, when you open again the same file, $x=y$ will be
shown as WYSIWIG.
Asking the user to press C-m on this particular LaTeX snippet is not too
Sorry, forgot to mention I'm using the mwbk class. Book class does not
seem to do this
On Wed, 2003-10-08 at 22:12, Gordon Wells wrote:
I get the following error whenever I try to use natbib in my current
document (It does not happen if I start a clean document though):
[1] [1]
I am using the 'report class' and have added Abstract and Acknowledgements
before the Table of Contents. The main body of the report is supposed to use
the arabic pagenumbers while others have to use the roman numbering.
The problem is that the TOC is resetting the pagenumbers and not following
Rajil Saraswat wrote:
I am attaching the lyx file with this email. Please correct me where i am
wrong.
Have a look at the attached corrected example.
Jürgen.
#LyX 1.3 created this file. For more info see http://www.lyx.org/
\lyxformat 221
\textclass report
\language english
\inputencoding auto
On Thursday 09 October 2003 09:18, Juergen Spitzmueller wrote:
Rajil Saraswat wrote:
I am attaching the lyx file with this email. Please correct me where i am
wrong.
Have a look at the attached corrected example.
Jürgen.
Thanks for correcting my mistakes. Your file was very neat, i could
Rajil Saraswat wrote:
However the page break between the Acknowledgement and the TOC seems to be
lost. Maybe this is because of the stuff in preamble.
This is because of the package tocloft, which does not start a new page
between toc, lof, and lot. You have to insert a page break (or a
On Thursday 09 October 2003 09:56, Juergen Spitzmueller wrote:
Rajil Saraswat wrote:
However the page break between the Acknowledgement and the TOC seems to
be lost. Maybe this is because of the stuff in preamble.
This is because of the package tocloft, which does not start a new page
Juergen Spitzmueller schrieb:
Rajil Saraswat wrote:
However the page break between the Acknowledgement and the TOC seems to be
lost. Maybe this is because of the stuff in preamble.
This is because of the package tocloft, which does not start a new page
between toc, lof, and lot. You have to
Semi fixed now
Included the following in the preamble, then run C-t twice:
\renewcommand{\bibsection}{\chapter*{\bibname}}
Kindly supplied by M.W.
On Thu, 2003-10-09 at 09:39, Gordon Wells wrote:
Sorry, forgot to mention I'm using the mwbk class. Book class does not
seem to do this
On
El Mié 08 Oct 2003 05:27, Raphael Clifford escribió:
Nirmal Govind wrote:
like you are suggesting having a file per slide and circumventing lyx
entirely for the output? What I need is a way to include a complete
page in lyx (using prosper layout). It doesn't really matter to me
The
Osvaldo Fornaro wrote:
El Mié 08 Oct 2003 05:27, Raphael Clifford escribió:
Nirmal Govind wrote:
like you are suggesting having a file per slide and circumventing lyx
entirely for the output? What I need is a way to include a complete
page in lyx (using prosper layout). It doesn't
El Jue 09 Oct 2003 10:55, escribió:
Osvaldo Fornaro wrote:
El Mié 08 Oct 2003 05:27, Raphael Clifford escribió:
Nirmal Govind wrote:
like you are suggesting having a file per slide and circumventing lyx
entirely for the output? What I need is a way to include a complete
page in lyx (using
Osvaldo Fornaro wrote:
El Jue 09 Oct 2003 10:55, escribió:
Osvaldo Fornaro wrote:
El Mié 08 Oct 2003 05:27, Raphael Clifford escribió:
Nirmal Govind wrote:
like you are suggesting having a file per slide and circumventing lyx
entirely for the output? What I need is a way
Raphael Clifford wrote:
\vspace*{-2cm}\hspace*{-0.4cm}
in ERT or in lyx somehow?
in ERT in the slide text, before the image
OK thanks very much. Maybe the lyx people could add a way to do this
:) Or maybe it should be a prosper feature (\includeslide)?
vspace is already there. See the
El Jue 09 Oct 2003 13:15, Angus Leeming escribió:
vspace is already there. See the Spacing tab of the Paragraph dialog.
I don't see the point in using the starred form of \vspace here. From
http://www.astro.ku.dk/help/LaTeX/ltx-347.html
LaTeX removes vertical space that comes at the end of
The LyX wiki site has moved to its new home
http://wiki.lyx.org/pmwiki.php
(it used to be http://ev-en.org/wiki/moin.cgi/LyxWikis). For the full
announcement, go to:
http://wiki.lyx.org/pmwiki.php/Main/Announcement
The section with frequently asked questions can now be found
Paul Smith wrote:
Could somebody here please teach me how to delete a macro?
Just delete its definition in the LyX window. There should not be
nothing more mysterious than that going around.
Matej
--
Matej Cepl,
GPG Finger: 89EF 4BC6 288A BF43 1BAB 25C3 E09F EF25 D964 84AC
138 Highland Ave.
On Thu, 9 Oct 2003, Matej Cepl wrote:
Paul Smith wrote:
Could somebody here please teach me how to delete a macro?
Just delete its definition in the LyX window. There should not be
nothing more mysterious than that going around.
You may have to restart LyX, since the macros (at the
Just delete its definition in the LyX window. There should not be
nothing more mysterious than that going around.
I had already tried it, but it does not delete the macro... well, at least
with the version installed on my computer (LyX 1.3.2). The definition
disappears, but it is still possible
You may have to restart LyX, since the macros (at the moment) are global
to LyX and might not disappear just because you delete their definition.
(I don't really know, but since you asked you probably had a problem with
deleting them).
Yes, Christian, it was necessary to restart LyX. Thank
I get the following error whenever I try to use natbib in my current
document (It does not happen if I start a clean document though):
[1] [1] (./thesis3nobib.toc [2] [3]
! Undefined control sequence.
[EMAIL PROTECTED] -[EMAIL PROTECTED]
l.96 ...aphy}}\endgroup }}}\mark {}\endgroup }{61}
On Wed, Oct 08, 2003 at 04:03:09PM +0100, Paul Smith wrote:
For instance, with SWP, if you insert the LaTeX code $x=y$, saving and
closing the file, then, when you open again the same file, $x=y$ will be
shown as WYSIWIG.
Asking the user to press C-m on this particular LaTeX snippet is not too
Sorry, forgot to mention I'm using the mwbk class. Book class does not
seem to do this
On Wed, 2003-10-08 at 22:12, Gordon Wells wrote:
I get the following error whenever I try to use natbib in my current
document (It does not happen if I start a clean document though):
[1] [1]
I am using the 'report class' and have added Abstract and Acknowledgements
before the Table of Contents. The main body of the report is supposed to use
the arabic pagenumbers while others have to use the roman numbering.
The problem is that the TOC is resetting the pagenumbers and not following
Rajil Saraswat wrote:
I am attaching the lyx file with this email. Please correct me where i am
wrong.
Have a look at the attached corrected example.
Jürgen.
#LyX 1.3 created this file. For more info see http://www.lyx.org/
\lyxformat 221
\textclass report
\language english
\inputencoding auto
On Thursday 09 October 2003 09:18, Juergen Spitzmueller wrote:
Rajil Saraswat wrote:
I am attaching the lyx file with this email. Please correct me where i am
wrong.
Have a look at the attached corrected example.
Jürgen.
Thanks for correcting my mistakes. Your file was very neat, i could
Rajil Saraswat wrote:
However the page break between the Acknowledgement and the TOC seems to be
lost. Maybe this is because of the stuff in preamble.
This is because of the package tocloft, which does not start a new page
between toc, lof, and lot. You have to insert a page break (or a
On Thursday 09 October 2003 09:56, Juergen Spitzmueller wrote:
Rajil Saraswat wrote:
However the page break between the Acknowledgement and the TOC seems to
be lost. Maybe this is because of the stuff in preamble.
This is because of the package tocloft, which does not start a new page
Juergen Spitzmueller schrieb:
Rajil Saraswat wrote:
However the page break between the Acknowledgement and the TOC seems to be
lost. Maybe this is because of the stuff in preamble.
This is because of the package tocloft, which does not start a new page
between toc, lof, and lot. You have to
Semi fixed now
Included the following in the preamble, then run C-t twice:
\renewcommand{\bibsection}{\chapter*{\bibname}}
Kindly supplied by M.W.
On Thu, 2003-10-09 at 09:39, Gordon Wells wrote:
Sorry, forgot to mention I'm using the mwbk class. Book class does not
seem to do this
On
El Mié 08 Oct 2003 05:27, Raphael Clifford escribió:
Nirmal Govind wrote:
like you are suggesting having a file per slide and circumventing lyx
entirely for the output? What I need is a way to include a complete
page in lyx (using prosper layout). It doesn't really matter to me
The
Osvaldo Fornaro wrote:
El Mié 08 Oct 2003 05:27, Raphael Clifford escribió:
Nirmal Govind wrote:
like you are suggesting having a file per slide and circumventing lyx
entirely for the output? What I need is a way to include a complete
page in lyx (using prosper layout). It doesn't
El Jue 09 Oct 2003 10:55, escribió:
Osvaldo Fornaro wrote:
El Mié 08 Oct 2003 05:27, Raphael Clifford escribió:
Nirmal Govind wrote:
like you are suggesting having a file per slide and circumventing lyx
entirely for the output? What I need is a way to include a complete
page in lyx (using
Osvaldo Fornaro wrote:
El Jue 09 Oct 2003 10:55, escribió:
Osvaldo Fornaro wrote:
El Mié 08 Oct 2003 05:27, Raphael Clifford escribió:
Nirmal Govind wrote:
like you are suggesting having a file per slide and circumventing lyx
entirely for the output? What I need is a way
Raphael Clifford wrote:
\vspace*{-2cm}\hspace*{-0.4cm}
in ERT or in lyx somehow?
in ERT in the slide text, before the image
OK thanks very much. Maybe the lyx people could add a way to do this
:) Or maybe it should be a prosper feature (\includeslide)?
vspace is already there. See the
El Jue 09 Oct 2003 13:15, Angus Leeming escribió:
vspace is already there. See the Spacing tab of the Paragraph dialog.
I don't see the point in using the starred form of \vspace here. From
http://www.astro.ku.dk/help/LaTeX/ltx-347.html
LaTeX removes vertical space that comes at the end of
The LyX wiki site has moved to its new home
http://wiki.lyx.org/pmwiki.php
(it used to be http://ev-en.org/wiki/moin.cgi/LyxWikis). For the full
announcement, go to:
http://wiki.lyx.org/pmwiki.php/Main/Announcement
The section with frequently asked questions can now be found
Paul Smith wrote:
Could somebody here please teach me how to delete a macro?
Just delete its definition in the LyX window. There should not be
nothing more mysterious than that going around.
Matej
--
Matej Cepl,
GPG Finger: 89EF 4BC6 288A BF43 1BAB 25C3 E09F EF25 D964 84AC
138 Highland Ave.
On Thu, 9 Oct 2003, Matej Cepl wrote:
Paul Smith wrote:
Could somebody here please teach me how to delete a macro?
Just delete its definition in the LyX window. There should not be
nothing more mysterious than that going around.
You may have to restart LyX, since the macros (at the
Just delete its definition in the LyX window. There should not be
nothing more mysterious than that going around.
I had already tried it, but it does not delete the macro... well, at least
with the version installed on my computer (LyX 1.3.2). The definition
disappears, but it is still possible
You may have to restart LyX, since the macros (at the moment) are global
to LyX and might not disappear just because you delete their definition.
(I don't really know, but since you asked you probably had a problem with
deleting them).
Yes, Christian, it was necessary to restart LyX. Thank
I get the following error whenever I try to use natbib in my current
document (It does not happen if I start a clean document though):
[1] [1] (./thesis3nobib.toc [2] [3]
! Undefined control sequence.
[EMAIL PROTECTED] ->[EMAIL PROTECTED]
l.96 ...aphy}}\endgroup }}}\mark {}\endgroup }{61}
On Wed, Oct 08, 2003 at 04:03:09PM +0100, Paul Smith wrote:
> For instance, with SWP, if you insert the LaTeX code $x=y$, saving and
> closing the file, then, when you open again the same file, $x=y$ will be
> shown as WYSIWIG.
Asking the user to press C-m on this particular LaTeX snippet is not
Sorry, forgot to mention I'm using the mwbk class. Book class does not
seem to do this
On Wed, 2003-10-08 at 22:12, Gordon Wells wrote:
> I get the following error whenever I try to use natbib in my current
> document (It does not happen if I start a clean document though):
>
>
> [1] [1]
I am using the 'report class' and have added Abstract and Acknowledgements
before the Table of Contents. The main body of the report is supposed to use
the arabic pagenumbers while others have to use the roman numbering.
The problem is that the TOC is resetting the pagenumbers and not following
Rajil Saraswat wrote:
> I am attaching the lyx file with this email. Please correct me where i am
> wrong.
Have a look at the attached corrected example.
Jürgen.
#LyX 1.3 created this file. For more info see http://www.lyx.org/
\lyxformat 221
\textclass report
\language english
\inputencoding
On Thursday 09 October 2003 09:18, Juergen Spitzmueller wrote:
> Rajil Saraswat wrote:
> > I am attaching the lyx file with this email. Please correct me where i am
> > wrong.
>
> Have a look at the attached corrected example.
> Jürgen.
Thanks for correcting my mistakes. Your file was very neat,
Rajil Saraswat wrote:
> However the page break between the Acknowledgement and the TOC seems to be
> lost. Maybe this is because of the stuff in preamble.
This is because of the package tocloft, which does not start a new page
between toc, lof, and lot. You have to insert a page break (or a
On Thursday 09 October 2003 09:56, Juergen Spitzmueller wrote:
> Rajil Saraswat wrote:
> > However the page break between the Acknowledgement and the TOC seems to
> > be lost. Maybe this is because of the stuff in preamble.
>
> This is because of the package tocloft, which does not start a new
Juergen Spitzmueller schrieb:
Rajil Saraswat wrote:
However the page break between the Acknowledgement and the TOC seems to be
lost. Maybe this is because of the stuff in preamble.
This is because of the package tocloft, which does not start a new page
between toc, lof, and lot. You have to
Semi fixed now
Included the following in the preamble, then run C-t twice:
\renewcommand{\bibsection}{\chapter*{\bibname}}
Kindly supplied by M.W.
On Thu, 2003-10-09 at 09:39, Gordon Wells wrote:
> Sorry, forgot to mention I'm using the mwbk class. Book class does not
> seem to do this
>
>
El Mié 08 Oct 2003 05:27, Raphael Clifford escribió:
> Nirmal Govind wrote:
> >> like you are suggesting having a file per slide and circumventing lyx
> >> entirely for the output? What I need is a way to include a complete
> >> page in lyx (using prosper layout). It doesn't really matter to me
Osvaldo Fornaro wrote:
El Mié 08 Oct 2003 05:27, Raphael Clifford escribió:
Nirmal Govind wrote:
like you are suggesting having a file per slide and circumventing lyx
entirely for the output? What I need is a way to include a complete
page in lyx (using prosper layout). It doesn't
El Jue 09 Oct 2003 10:55, escribió:
> Osvaldo Fornaro wrote:
> >El Mié 08 Oct 2003 05:27, Raphael Clifford escribió:
> >>Nirmal Govind wrote:
> like you are suggesting having a file per slide and circumventing lyx
> entirely for the output? What I need is a way to include a complete
>
Osvaldo Fornaro wrote:
El Jue 09 Oct 2003 10:55, escribió:
Osvaldo Fornaro wrote:
El Mié 08 Oct 2003 05:27, Raphael Clifford escribió:
Nirmal Govind wrote:
like you are suggesting having a file per slide and circumventing lyx
entirely for the output? What I need is a way
Raphael Clifford wrote:
>>>\vspace*{-2cm}\hspace*{-0.4cm}
>>>in ERT or in lyx somehow?
>>in ERT in the slide text, before the image
> OK thanks very much. Maybe the lyx people could add a way to do this
> :) Or maybe it should be a prosper feature (\includeslide)?
vspace is already there. See
El Jue 09 Oct 2003 13:15, Angus Leeming escribió:
>
> vspace is already there. See the Spacing tab of the Paragraph dialog.
>
> I don't see the point in using the starred form of \vspace here. From
> http://www.astro.ku.dk/help/LaTeX/ltx-347.html
>
> "LaTeX removes vertical space that comes at the
The LyX wiki site has moved to its new home
http://wiki.lyx.org/pmwiki.php
(it used to be http://ev-en.org/wiki/moin.cgi/LyxWikis). For the full
announcement, go to:
http://wiki.lyx.org/pmwiki.php/Main/Announcement
The section with frequently asked questions can now be found
Paul Smith wrote:
> Could somebody here please teach me how to delete a macro?
Just delete its definition in the LyX window. There should not be
nothing more mysterious than that going around.
Matej
--
Matej Cepl,
GPG Finger: 89EF 4BC6 288A BF43 1BAB 25C3 E09F EF25 D964 84AC
138 Highland Ave.
On Thu, 9 Oct 2003, Matej Cepl wrote:
> Paul Smith wrote:
> > Could somebody here please teach me how to delete a macro?
>
> Just delete its definition in the LyX window. There should not be
> nothing more mysterious than that going around.
>
You may have to restart LyX, since the macros (at
> Just delete its definition in the LyX window. There should not be
> nothing more mysterious than that going around.
I had already tried it, but it does not delete the macro... well, at least
with the version installed on my computer (LyX 1.3.2). The definition
disappears, but it is still
> You may have to restart LyX, since the macros (at the moment) are global
> to LyX and might not disappear just because you delete their definition.
> (I don't really know, but since you asked you probably had a problem with
> deleting them).
Yes, Christian, it was necessary to restart LyX.
63 matches
Mail list logo