Peter Baumgartner wrote:
How to break URL at non-letters without hyphen?
Insert-URL should just work.
Jürgen
Hi Peter,
I have put in the preamble \usepackage{breakurl} and everything is fine. I
use a normal .bib file and I do not biblatex. In my last document I have a
long bibliography with a lot of refences to electronic documents and web
pages, then there is plenty of URL in there and breaking of
Am 01.12.2008 um 18:59 schrieb James Sutherland:
I have a parent document where I have defined macros. In the child
document, I have used the macro.
The compiled output (either from the child, or the parent), is
fine. However, the LyX preview for the equations using macros is
not
Am Mon, 01 Dec 2008 20:30:27 -0500
schrieb rgheck [EMAIL PROTECTED]:
[EMAIL PROTECTED] wrote:
The problem is only happening for LyX 1.6.0. LyX 1.5.6 works as
expected on the same system.
So with 1.5.6 on the same system, everything is OK?
rh
Yes - with 1.5.6 on the same system
Am Tue, 02 Dec 2008 08:20:03 +0100
schrieb Abdelrazak Younes [EMAIL PROTECTED]:
[EMAIL PROTECTED] wrote:
Xubuntu 8.10 with xserver-common version: 2:1.5.2-2ubuntu3
Usually, I use XFCE4 version: 4.4.2.1, I tried it now also with
openbox after Richard Hecks's tip. It was a little bit faster
Good email to the Copernicus people! But I have some news as well:
- reinstalled all lyx stuff I ever had and put your layout and template in
the proper directories, before my first start up; your save .layout in
.template folder trick did not work :)
- Now I can create PDF from the template!
[EMAIL PROTECTED] wrote:
Is there a method to check (I have already deleted the compilation
directory)?
lyx --version gives some relevant informations.
Jürgen
newnoise wrote:
I'm answering myself if in Lyx is possible to modify the list of
figures/table as follow. Normally you have
List of Figures
1 Something
2 Something
instead I would to have
List of Figures
Figure 1 Something
Figure 2 Something
I'm asking myself why you did not read
Hi,
I want to include a citation to LyX on a paper but I don't know what's
the correct bibliographic reference for LyX. In R (r-project.org) one
runs citation() and gets:
To cite R in publications use:
R Development Core Team (2008). R: A language and environment for
statistical computing.
[EMAIL PROTECTED] wrote:
I compiled it myself using libqt4-dev (Version: 4.4.3-0ubuntu1).
The commands I issued:
1. ./autogen.sh
2. ./configure
3. make
4. sudo make install
I am not sure if this stdlib-debug option is set automatically.
I guess this is 1.6.1svn you are using. In this case
asm23 wrote:
HI, how do I enable the console output in lyx 1.6.
I searched the mail achieve.
Someone suggested that I should Add -dbg 3 .
But where do I add these statement?
It seems that Lyx.bat is not a correct place to add...
Thank you.
You should start LyX from a Terminal window (or
Jürgen Spitzmüller wrote:
Erez Yerushalmi wrote:
Happens when:
Many times when I write in math equations.
And also happened a few times when I shift the tool bars to different
positions.
Do others have this problem?
These are known bugs (reported at bugzilla), and we hope to sort them out
Jürgen Spitzmüller wrote:
[Problem: in order to add a new bib/bst file to the widgets in the bibtex
dialog, one needs to click Rescan in the TeXInfo dialog]
Konrad Hofbauer wrote:
But we need to make this more obvious for sure.
Maybe put it in the menus, next to Reconfigure?
Or in the
On Dec 2, 2008, at 5:49 AM, Stefan Schimanski wrote:
Am 01.12.2008 um 18:59 schrieb James Sutherland:
I have a parent document where I have defined macros. In the child
document, I have used the macro.
The compiled output (either from the child, or the parent), is
fine. However, the
Olivier Ripoll wrote:
The most common crash on Windows (#5472: the crash when copy operation
is followed by opening a MS Office program) does not result in any data
loss (the emergency save does its job). So Erez's crash is not a
duplicate of it as far as I can say.
No. But of this (toolbar
Abdelrazak Younes [EMAIL PROTECTED] writes:
Which version of Qt? Are you using a precompiled package or did you
compile by yourself? Maybe the package was compiled with stdlib-debug?
Note that all the load is in the X server. I would be surprised to see
that it is a consequence of using
I have put in the preamble \usepackage{breakurl} and everything is fine.
@Pierfranco: Thanks! - This works in both cases (bibtex and biblatex). Is
this a special package? How did you find this out?
Also sprach Peter Baumgartner:
I know that just Insert-URL should work, but it didn't. Something wrong
with the new version or my insallation?
In order to find out, we need a minimal example file that shows the
misbehaviour for you. Both the LyX file and the LaTeX output.
(everything works as
Bigler Stéphane wrote:
Dear all,
After installing mytek and lyx_1.6.0 on a windows XP, *all* the
documents classes are unavailable.
I googled and none of the following helped me:
step_1) Make sure that the MiKTeX bin directory is on my system command
path:
- yes it is, I can launch latex
Joost Verburg wrote:
Abdelrazak Younes wrote:
But when I install the Lyx (both the standard version or the
alternative installer), the installer will *automatically* change
this option to Yes. (it seems very strange)
I hope that the installer informs you before doing this change and
that
Hi,
I just installed MikTex 2.7 and lyx 1.6 .
I started to write a new document, but when I do View - DVI , lyx doesn't
do anything.
Also, when I do File - Export - DVI , no dvi file appears.
what can I do?
is there any log file I can check for errors?
thanks.
- Ran
On Thu, 2008-11-27 at 19:32 -0500, rgheck wrote:
Nikos Alexandris wrote:
On Thu, 2008-11-27 at 05:36 +0100, Nikos Alexandris wrote:
Hi all!
Is there any quick-hack to *move* chapter/section/subsection numbers off
the main text-body, e.g. move it to the frame (well... left from the
Jürgen Spitzmüller wrote:
Max Bian wrote:
I am seeing lots of crashes with LyX 1.6 on Windows Vista. I think it
happens when it cannot delete the temp files during exit. This can
happen when I browse the files in the temp file directory or I do not
close Adobe PDF Reader.
This looks like a
Ran Manor wrote:
Hi,
I just installed MikTex 2.7 and lyx 1.6 .
I started to write a new document, but when I do View - DVI , lyx doesn't
do anything.
Also, when I do File - Export - DVI , no dvi file appears.
what can I do?
is there any log file I can check for errors?
thanks.
- Ran
A DVI
Hi Peter,
happy to have been of help. But sorry: I can't remember where I found the
breakurl package. I spent part of last summer learning the basics of LaTeX
and how to customize LyX texts so that they could suit my needs and really I
can't remember all the stuff I have checked when I
Stéphane fixed this by reinstalling both LyX and MiKTeX.
On Tue, Dec 2, 2008 at 2:51 AM, Abdelrazak Younes [EMAIL PROTECTED] wrote:
Eberhard Lisse wrote:
All in all it makes work at the practice so impossible that I have had to
switch back to 1.5.7 for the time being, but I'll continue to play with
1.6.0 at home.
Hello Eberhard,
There are a
Ernesto Jardim wrote:
Hi,
I want to include a citation to LyX on a paper but I don't know what's
the correct bibliographic reference for LyX. In R (r-project.org) one
runs citation() and gets:
To cite R in publications use:
R Development Core Team (2008). R: A language and environment for
asm23 wrote:
Ran Manor wrote:
Hi,
I just installed MikTex 2.7 and lyx 1.6 .
I started to write a new document, but when I do View - DVI , lyx
doesn't
do anything.
Also, when I do File - Export - DVI , no dvi file appears.
what can I do?
is there any log file I can check for errors?
thanks.
-
Am Tue, 02 Dec 2008 16:25:09 +0100
schrieb Jean-Marc Lasgouttes [EMAIL PROTECTED]:
Abdelrazak Younes [EMAIL PROTECTED] writes:
Which version of Qt? Are you using a precompiled package or did you
compile by yourself? Maybe the package was compiled with
stdlib-debug?
Note that all the
Also sprach Peter Baumgartner:
I know that just Insert-URL should work, but it didn't. Something wrong
with the new version or my insallation?
In order to find out, we need a minimal example file that shows the
misbehaviour for you. Both the LyX file and the LaTeX output.
(everything
Jürgen Spitzmüller wrote:
Olivier Ripoll wrote:
The most common crash on Windows (#5472: the crash when copy operation
is followed by opening a MS Office program) does not result in any data
loss (the emergency save does its job). So Erez's crash is not a
duplicate of it as far as I can say.
On Tue, 2008-12-02 at 17:38 +0100, Peter Baumgartner wrote:
Also sprach Peter Baumgartner:
I know that just Insert-URL should work, but it didn't. Something wrong
with the new version or my insallation?
In order to find out, we need a minimal example file that shows the
misbehaviour
So mere users like us would need a special binary to test that :-)
So, step out of the mere-usership, get VCExpress (free), get Subversion
(free), get the LyX sources (free) and compile your own ;-).
Best regards,
Olivier
Vincent
P.S. I'm afraid bug 5472 is not suited for generating a
On Fri, 2008-11-28 at 15:40 +0100, Matts Lindström wrote:
Hello,
Is it somehow possible to change the color of notes (Greyed out notes) in
the pdf that lyx outputs? (I'm using LyX 1.6rc2 and texlive running on
Ubuntu Linux)
Regards,
Matts Lindström
Hi!
Besides using:
Vincent van Ravesteijn wrote:
So mere users like us would need a special binary to test that :-)
So, step out of the mere-usership, get VCExpress (free), get Subversion
(free), get the LyX sources (free) and compile your own ;-).
My personal computer @ home is linux-only. I have compiled
Am 02.12.2008 um 14:45 schrieb Jürgen Spitzmüller:
lyx --version gives some relevant informations.
Sorry, - because it might be once important, not because of fast
typing - ...slowly -
I only get the response:
localhost:/applications joachim$ lyx -version
-bash: lyx: command not found
Or
On Tue, Dec 02, 2008 at 04:25:09PM +0100, Jean-Marc Lasgouttes wrote:
Abdelrazak Younes [EMAIL PROTECTED] writes:
Which version of Qt? Are you using a precompiled package or did you
compile by yourself? Maybe the package was compiled with stdlib-debug?
Note that all the load is in the X
On Tue, Dec 02, 2008 at 07:10:55PM +0100, Joachim Kreimer-de Fries wrote:
Am 02.12.2008 um 14:45 schrieb Jürgen Spitzmüller:
lyx --version gives some relevant informations.
Sorry, - because it might be once important, not because of fast typing
- ...slowly -
I only get the response:
Hello!
I'd like to define a few more math environments and I have no idea how. I
don't want too many. I use all kinds of extensions to AMS, and it has really
useful environments, but I want one more, and I want to be able to select it
in lyx.
Basically, it should be the same like the lemma
i also want to write some numbers in a typewriter font, because they all
have the same length. actually, what i have is input to a computational
problem and i'm still figuring how to typeset it all right.
I have an input pair (S,r). And i want to describe two strings s_1, s_2 \in
S:
s_1 =
OK, I think I got it to work. I did a bunch of things (mostly uninformed),
and some combination of them seems to have worked, but I'm guessing these
were the three key steps:
1. I installed the polynom package and put it in my LaTeX directory:
C:\Program Files\MiKTeX 2.7\tex\latex. I probably
Niko Schwarz wrote:
Hello!
I'd like to define a few more math environments and I have no idea how. I
don't want too many. I use all kinds of extensions to AMS, and it has really
useful environments, but I want one more, and I want to be able to select it
in lyx.
Basically, it should be the same
Niko Schwarz wrote:
i also want to write some numbers in a typewriter font, because they all
have the same length. actually, what i have is input to a computational
problem and i'm still figuring how to typeset it all right.
I have an input pair (S,r). And i want to describe two strings s_1, s_2
Niko Schwarz wrote:
i also want to write some numbers in a typewriter font, because they all
have the same length.
In many (most?) fonts, all numerals have the same width, so you don't
have to use typewriter to do this.
rh
Very nice, Jeff. Thanks for this. New to me!
/
Down with categorical imperative!
[EMAIL PROTECTED]
/
From: Jamesdaff [EMAIL PROTECTED]
To: lyx-users@lists.lyx.org
Sent: Tuesday, December
Am 02.12.2008 um 19:36 schrieb Andre Poenitz:
That's the correct console. Now you just need to find the LyX binary.
If you are already in the right directory, use ./lyx to start it.
Sorry, Andre and others who know it,
I tried out (with ... --version) all directories that in my opinien
Hi,
I'm just finishing my thesis and have got some problems with a couple of
footnotes. some of them are moved somewhat towards the middle and there is a
pretty large paragraph above it.
actually i can't really trace the problem, i already tried a couple of
templates (book, book-memoire,
Am Tue, 2 Dec 2008 23:08:00 +0100
schrieb Joachim Kreimer-de Fries [EMAIL PROTECTED]:
Am 02.12.2008 um 19:36 schrieb Andre Poenitz:
That's the correct console. Now you just need to find the LyX
binary.
If you are already in the right directory, use ./lyx to start it.
Sorry, Andre
On Dec 2, 2008, at 2:28 PM, [EMAIL PROTECTED] wrote:
Am Tue, 2 Dec 2008 23:08:00 +0100
schrieb Joachim Kreimer-de Fries [EMAIL PROTECTED]:
Am 02.12.2008 um 19:36 schrieb Andre Poenitz:
That's the correct console. Now you just need to find the LyX
binary.
If you are already in the right
On Tue, 02 Dec 2008 15:58:22 +0100
Olivier Ripoll [EMAIL PROTECTED] wrote:
Jürgen Spitzmüller wrote:
Erez Yerushalmi wrote:
Happens when:
Many times when I write in math equations.
And also happened a few times when I shift the tool bars to different
positions.
Do others have this
Am 02.12.2008 um 23:41 schrieb Jens Noeckel:
On Mac OS X, you have to type the following in Terminal instead of
lyx --version:
/Applications/LyX.app/Contents/MacOS/lyx --version
Thanx, Jens,
that was it (see, if curious, output in Post Scriptum).
Thank you, [EMAIL PROTECTED], too. The
This is probably a very simple question: does anyone know how to get a
Ð to show up in math mode? I can copy and past it, but I don't know
how to get it from a key stroke... I saw some things on the web that
suggested \DJ should produce this, but it doesn't seem to work...
On Dec 2, 2008, at 4:46 PM, James Sutherland wrote:
This is probably a very simple question: does anyone know how to get
a Ð to show up in math mode? I can copy and past it, but I don't
know how to get it from a key stroke... I saw some things on the
web that suggested \DJ should produce
hello,
i am a long-time LyX user and big fan of the software. i recently
upgraded to 1.6 and noticed a few strange editing problems. cmd-
return does not break the paragraph (nothing happens and LyX displays
unknown function in the lower left) and holding down shift to
highlight
Andre Poenitz wrote:
On Tue, Dec 02, 2008 at 04:25:09PM +0100, Jean-Marc Lasgouttes wrote:
Abdelrazak Younes [EMAIL PROTECTED] writes:
Which version of Qt? Are you using a precompiled package or did you
compile by yourself? Maybe the package was compiled with stdlib-debug?
Note
Olivier Ripoll wrote:
1- I'm a windows user on my company's laptop, not _my_ laptop. I have to
limit somehow what I install on it.
Would you believe that I am using Windows at home and Linux at work?
:-)
2- Compiling on Windows has the reputation to be way work pain than on
Linux
Hi,
I'm a lyx newbie.
I started writing my document and I wanted to export it to dvi.
but when I hit the view dvi , or export-dvi , nothing happens.
I can export it to a tex file and then with latex convert it to dvi.
also, if I open Lyx tutorial and hit view dvi , everything works fine.
does
Peter Baumgartner wrote:
How to break URL at non-letters without hyphen?
Insert-URL should just work.
Jürgen
Hi Peter,
I have put in the preamble \usepackage{breakurl} and everything is fine. I
use a normal .bib file and I do not biblatex. In my last document I have a
long bibliography with a lot of refences to electronic documents and web
pages, then there is plenty of URL in there and breaking of
Am 01.12.2008 um 18:59 schrieb James Sutherland:
I have a parent document where I have defined macros. In the child
document, I have used the macro.
The compiled output (either from the child, or the parent), is
fine. However, the LyX preview for the equations using macros is
not
Am Mon, 01 Dec 2008 20:30:27 -0500
schrieb rgheck [EMAIL PROTECTED]:
[EMAIL PROTECTED] wrote:
The problem is only happening for LyX 1.6.0. LyX 1.5.6 works as
expected on the same system.
So with 1.5.6 on the same system, everything is OK?
rh
Yes - with 1.5.6 on the same system
Am Tue, 02 Dec 2008 08:20:03 +0100
schrieb Abdelrazak Younes [EMAIL PROTECTED]:
[EMAIL PROTECTED] wrote:
Xubuntu 8.10 with xserver-common version: 2:1.5.2-2ubuntu3
Usually, I use XFCE4 version: 4.4.2.1, I tried it now also with
openbox after Richard Hecks's tip. It was a little bit faster
Good email to the Copernicus people! But I have some news as well:
- reinstalled all lyx stuff I ever had and put your layout and template in
the proper directories, before my first start up; your save .layout in
.template folder trick did not work :)
- Now I can create PDF from the template!
[EMAIL PROTECTED] wrote:
Is there a method to check (I have already deleted the compilation
directory)?
lyx --version gives some relevant informations.
Jürgen
newnoise wrote:
I'm answering myself if in Lyx is possible to modify the list of
figures/table as follow. Normally you have
List of Figures
1 Something
2 Something
instead I would to have
List of Figures
Figure 1 Something
Figure 2 Something
I'm asking myself why you did not read
Hi,
I want to include a citation to LyX on a paper but I don't know what's
the correct bibliographic reference for LyX. In R (r-project.org) one
runs citation() and gets:
To cite R in publications use:
R Development Core Team (2008). R: A language and environment for
statistical computing.
[EMAIL PROTECTED] wrote:
I compiled it myself using libqt4-dev (Version: 4.4.3-0ubuntu1).
The commands I issued:
1. ./autogen.sh
2. ./configure
3. make
4. sudo make install
I am not sure if this stdlib-debug option is set automatically.
I guess this is 1.6.1svn you are using. In this case
asm23 wrote:
HI, how do I enable the console output in lyx 1.6.
I searched the mail achieve.
Someone suggested that I should Add -dbg 3 .
But where do I add these statement?
It seems that Lyx.bat is not a correct place to add...
Thank you.
You should start LyX from a Terminal window (or
Jürgen Spitzmüller wrote:
Erez Yerushalmi wrote:
Happens when:
Many times when I write in math equations.
And also happened a few times when I shift the tool bars to different
positions.
Do others have this problem?
These are known bugs (reported at bugzilla), and we hope to sort them out
Jürgen Spitzmüller wrote:
[Problem: in order to add a new bib/bst file to the widgets in the bibtex
dialog, one needs to click Rescan in the TeXInfo dialog]
Konrad Hofbauer wrote:
But we need to make this more obvious for sure.
Maybe put it in the menus, next to Reconfigure?
Or in the
On Dec 2, 2008, at 5:49 AM, Stefan Schimanski wrote:
Am 01.12.2008 um 18:59 schrieb James Sutherland:
I have a parent document where I have defined macros. In the child
document, I have used the macro.
The compiled output (either from the child, or the parent), is
fine. However, the
Olivier Ripoll wrote:
The most common crash on Windows (#5472: the crash when copy operation
is followed by opening a MS Office program) does not result in any data
loss (the emergency save does its job). So Erez's crash is not a
duplicate of it as far as I can say.
No. But of this (toolbar
Abdelrazak Younes [EMAIL PROTECTED] writes:
Which version of Qt? Are you using a precompiled package or did you
compile by yourself? Maybe the package was compiled with stdlib-debug?
Note that all the load is in the X server. I would be surprised to see
that it is a consequence of using
I have put in the preamble \usepackage{breakurl} and everything is fine.
@Pierfranco: Thanks! - This works in both cases (bibtex and biblatex). Is
this a special package? How did you find this out?
Also sprach Peter Baumgartner:
I know that just Insert-URL should work, but it didn't. Something wrong
with the new version or my insallation?
In order to find out, we need a minimal example file that shows the
misbehaviour for you. Both the LyX file and the LaTeX output.
(everything works as
Bigler Stéphane wrote:
Dear all,
After installing mytek and lyx_1.6.0 on a windows XP, *all* the
documents classes are unavailable.
I googled and none of the following helped me:
step_1) Make sure that the MiKTeX bin directory is on my system command
path:
- yes it is, I can launch latex
Joost Verburg wrote:
Abdelrazak Younes wrote:
But when I install the Lyx (both the standard version or the
alternative installer), the installer will *automatically* change
this option to Yes. (it seems very strange)
I hope that the installer informs you before doing this change and
that
Hi,
I just installed MikTex 2.7 and lyx 1.6 .
I started to write a new document, but when I do View - DVI , lyx doesn't
do anything.
Also, when I do File - Export - DVI , no dvi file appears.
what can I do?
is there any log file I can check for errors?
thanks.
- Ran
On Thu, 2008-11-27 at 19:32 -0500, rgheck wrote:
Nikos Alexandris wrote:
On Thu, 2008-11-27 at 05:36 +0100, Nikos Alexandris wrote:
Hi all!
Is there any quick-hack to *move* chapter/section/subsection numbers off
the main text-body, e.g. move it to the frame (well... left from the
Jürgen Spitzmüller wrote:
Max Bian wrote:
I am seeing lots of crashes with LyX 1.6 on Windows Vista. I think it
happens when it cannot delete the temp files during exit. This can
happen when I browse the files in the temp file directory or I do not
close Adobe PDF Reader.
This looks like a
Ran Manor wrote:
Hi,
I just installed MikTex 2.7 and lyx 1.6 .
I started to write a new document, but when I do View - DVI , lyx doesn't
do anything.
Also, when I do File - Export - DVI , no dvi file appears.
what can I do?
is there any log file I can check for errors?
thanks.
- Ran
A DVI
Hi Peter,
happy to have been of help. But sorry: I can't remember where I found the
breakurl package. I spent part of last summer learning the basics of LaTeX
and how to customize LyX texts so that they could suit my needs and really I
can't remember all the stuff I have checked when I
Stéphane fixed this by reinstalling both LyX and MiKTeX.
On Tue, Dec 2, 2008 at 2:51 AM, Abdelrazak Younes [EMAIL PROTECTED] wrote:
Eberhard Lisse wrote:
All in all it makes work at the practice so impossible that I have had to
switch back to 1.5.7 for the time being, but I'll continue to play with
1.6.0 at home.
Hello Eberhard,
There are a
Ernesto Jardim wrote:
Hi,
I want to include a citation to LyX on a paper but I don't know what's
the correct bibliographic reference for LyX. In R (r-project.org) one
runs citation() and gets:
To cite R in publications use:
R Development Core Team (2008). R: A language and environment for
asm23 wrote:
Ran Manor wrote:
Hi,
I just installed MikTex 2.7 and lyx 1.6 .
I started to write a new document, but when I do View - DVI , lyx
doesn't
do anything.
Also, when I do File - Export - DVI , no dvi file appears.
what can I do?
is there any log file I can check for errors?
thanks.
-
Am Tue, 02 Dec 2008 16:25:09 +0100
schrieb Jean-Marc Lasgouttes [EMAIL PROTECTED]:
Abdelrazak Younes [EMAIL PROTECTED] writes:
Which version of Qt? Are you using a precompiled package or did you
compile by yourself? Maybe the package was compiled with
stdlib-debug?
Note that all the
Also sprach Peter Baumgartner:
I know that just Insert-URL should work, but it didn't. Something wrong
with the new version or my insallation?
In order to find out, we need a minimal example file that shows the
misbehaviour for you. Both the LyX file and the LaTeX output.
(everything
Jürgen Spitzmüller wrote:
Olivier Ripoll wrote:
The most common crash on Windows (#5472: the crash when copy operation
is followed by opening a MS Office program) does not result in any data
loss (the emergency save does its job). So Erez's crash is not a
duplicate of it as far as I can say.
On Tue, 2008-12-02 at 17:38 +0100, Peter Baumgartner wrote:
Also sprach Peter Baumgartner:
I know that just Insert-URL should work, but it didn't. Something wrong
with the new version or my insallation?
In order to find out, we need a minimal example file that shows the
misbehaviour
So mere users like us would need a special binary to test that :-)
So, step out of the mere-usership, get VCExpress (free), get Subversion
(free), get the LyX sources (free) and compile your own ;-).
Best regards,
Olivier
Vincent
P.S. I'm afraid bug 5472 is not suited for generating a
On Fri, 2008-11-28 at 15:40 +0100, Matts Lindström wrote:
Hello,
Is it somehow possible to change the color of notes (Greyed out notes) in
the pdf that lyx outputs? (I'm using LyX 1.6rc2 and texlive running on
Ubuntu Linux)
Regards,
Matts Lindström
Hi!
Besides using:
Vincent van Ravesteijn wrote:
So mere users like us would need a special binary to test that :-)
So, step out of the mere-usership, get VCExpress (free), get Subversion
(free), get the LyX sources (free) and compile your own ;-).
My personal computer @ home is linux-only. I have compiled
Am 02.12.2008 um 14:45 schrieb Jürgen Spitzmüller:
lyx --version gives some relevant informations.
Sorry, - because it might be once important, not because of fast
typing - ...slowly -
I only get the response:
localhost:/applications joachim$ lyx -version
-bash: lyx: command not found
Or
On Tue, Dec 02, 2008 at 04:25:09PM +0100, Jean-Marc Lasgouttes wrote:
Abdelrazak Younes [EMAIL PROTECTED] writes:
Which version of Qt? Are you using a precompiled package or did you
compile by yourself? Maybe the package was compiled with stdlib-debug?
Note that all the load is in the X
On Tue, Dec 02, 2008 at 07:10:55PM +0100, Joachim Kreimer-de Fries wrote:
Am 02.12.2008 um 14:45 schrieb Jürgen Spitzmüller:
lyx --version gives some relevant informations.
Sorry, - because it might be once important, not because of fast typing
- ...slowly -
I only get the response:
Hello!
I'd like to define a few more math environments and I have no idea how. I
don't want too many. I use all kinds of extensions to AMS, and it has really
useful environments, but I want one more, and I want to be able to select it
in lyx.
Basically, it should be the same like the lemma
i also want to write some numbers in a typewriter font, because they all
have the same length. actually, what i have is input to a computational
problem and i'm still figuring how to typeset it all right.
I have an input pair (S,r). And i want to describe two strings s_1, s_2 \in
S:
s_1 =
OK, I think I got it to work. I did a bunch of things (mostly uninformed),
and some combination of them seems to have worked, but I'm guessing these
were the three key steps:
1. I installed the polynom package and put it in my LaTeX directory:
C:\Program Files\MiKTeX 2.7\tex\latex. I probably
1 - 100 of 174 matches
Mail list logo