* Sajjad wrote, On 12/10/09 14:08:
Hello forum,
I want to write pseudo-code and i am doing that inside the program listing.
But when i generate the pdf , the code are cropped sideways.
Any hint to get around that issue?
Regards
Sajjad
Luca Carlon wrote:
Ahh. You are indeed correct. I can verify that the table over-runs
the page margins. I suspect that this may be a LaTeX problem rather
than a LyX problem, but the LaTeX gurus on the list would need to
verify that.
So, should I report the bug or should I wait
James C. Sutherland james.sutherl...@... writes:
Ahh. You are indeed correct. I can verify that the table over-runs
the page margins. I suspect that this may be a LaTeX problem rather
than a LyX problem, but the LaTeX gurus on the list would need to
verify that.
So, should I
Jürgen Spitzmüller sp...@... writes:
This is no bug at all. The width of your 4 cells alone make 100% textwidth.
But then, there's also the space between the columns (\tabcolsep) and the
width of the lines, which will be added to the width.
Jürgen
There is something I don't understand
Luca Carlon wrote:
There is something I don't understand here... There is no space between the
columns. Only a line of less than a mm. If you intend that the space
between the columns is used so that the text inside the cells doesn't
touch the border, then
The cell width is the width the
Olivier Ripoll durocortorum73-gm...@... writes:
First, congratulations for the work to the translation team.
A few comments / corrections (mostly minor)
Thanks for finding these typos, they are corrected.
--
Jean-Pierre
Bonjour,
j'utilise asymptote de temps à autre depuis quelques années maintenant.
J'utilisais metapost avant qui a une syntaxe un peu plus lourde.
Je suis vraiment très satisfait d'asymptote. On a très facilement et
rapidement de superbes figures en eps.
bien cordialement,
Marc
Le jeudi 01
Hi
is it possible to have in a frame [allowframebreak] an overprint
environment?
If yes - how? In my presentation, it is only printing the first slide of the
overprint.
Cheers,
Rainer
--
Rainer M. Krug, PhD (Conservation Ecology, SUN), MSc (Conservation Biology,
UCT), Dipl. Phys. (Germany)
Dear all,
as I'm at the beginning of a document preparation process I do not want to
decide right now how to decorate vectors, tensors and so on.
For this reason, I chose math macros since at the end of the preparation
I can change the decorations easily by editing only the macro.
I typed in
On the Web site I see that version 1.6.4.1 was recently released. Yet when
I went to download that version to upgrade from 1.6.3 the only available
.bz2 file was 1.6.4. Are these the same version or is 1.6.4.1 found
elsewhere?
Rich
hello,
I created a PDF-presentation with LyX. The handout is done, but now I
want to spice it up a little. I searched for documentation, but couldn't
find something about
- the Overlays Pause, Überdruck, Überlagerungsbereich,
Ausblenden and Nur and how to use them... Can s.o. tell me how
On 10/13/2009 03:19 PM, Nico wrote:
hello,
I created a PDF-presentation with LyX. The handout is done, but now I
want to spice it up a little. I searched for documentation, but
couldn't find something about
- the Overlays Pause, Überdruck, Überlagerungsbereich,
Ausblenden and Nur and
Le 13 oct. 09 à 19:57, Rich Shepard a écrit :
On the Web site I see that version 1.6.4.1 was recently released.
Yet when
I went to download that version to upgrade from 1.6.3 the only
available
.bz2 file was 1.6.4. Are these the same version or is 1.6.4.1 found
elsewhere?
1.6.4.1 is a
On Tue, 13 Oct 2009, Jean-Marc Lasgouttes wrote:
1.6.4.1 is a mac-only emargency update. 1.6.4 is the latest for the rest
of us.
JaMrc,
Ah, so! I didn't see that on the Web site.
Thanks,
Rich
--
Richard B. Shepard, Ph.D. | IntegrityCredibility
Applied
hello rh,
thanks for the very quick answer! Thanks to your hint, I could solve the
second problem... I tried that before, but didn't close the ERT-box, so
it didn't work...
I looked at the beamer template but couldn't find an environment like
the ones I mentioned. Are you shure that this
On Tue, 13 Oct 2009, Nico wrote:
I looked at the beamer template but couldn't find an environment like the
ones I mentioned. Are you shure that this overlays are documented in this
template?
Nico,
On my system, when I open a beamer-class file, or opt for a new one
(File-Open from
On 10/13/2009 04:07 PM, Nico wrote:
hello rh,
thanks for the very quick answer! Thanks to your hint, I could solve
the second problem... I tried that before, but didn't close the
ERT-box, so it didn't work...
I looked at the beamer template but couldn't find an environment like
the ones I
Hi, I am attempting to write a thesis using LyX, and have a few
questions. I have Googled extensively, but can't seem to find the
answers. I am using the report class.
1. How do I get the page numbers to continue in the abstract? The
abstract is the third page in, and appears to reset the
Dear Lyx users,
I have a document with a rather large table full of text, and I need to
reduce font size and select an appropriate paragraph spacing for the cells'
text. Changing font size is no problem, but I am having trouble controlling
the interline spacing (the leading space). I
* Sajjad wrote, On 12/10/09 14:08:
Hello forum,
I want to write pseudo-code and i am doing that inside the program listing.
But when i generate the pdf , the code are cropped sideways.
Any hint to get around that issue?
Regards
Sajjad
Luca Carlon wrote:
Ahh. You are indeed correct. I can verify that the table over-runs
the page margins. I suspect that this may be a LaTeX problem rather
than a LyX problem, but the LaTeX gurus on the list would need to
verify that.
So, should I report the bug or should I wait
James C. Sutherland james.sutherl...@... writes:
Ahh. You are indeed correct. I can verify that the table over-runs
the page margins. I suspect that this may be a LaTeX problem rather
than a LyX problem, but the LaTeX gurus on the list would need to
verify that.
So, should I
Jürgen Spitzmüller sp...@... writes:
This is no bug at all. The width of your 4 cells alone make 100% textwidth.
But then, there's also the space between the columns (\tabcolsep) and the
width of the lines, which will be added to the width.
Jürgen
There is something I don't understand
Luca Carlon wrote:
There is something I don't understand here... There is no space between the
columns. Only a line of less than a mm. If you intend that the space
between the columns is used so that the text inside the cells doesn't
touch the border, then
The cell width is the width the
Olivier Ripoll durocortorum73-gm...@... writes:
First, congratulations for the work to the translation team.
A few comments / corrections (mostly minor)
Thanks for finding these typos, they are corrected.
--
Jean-Pierre
Bonjour,
j'utilise asymptote de temps à autre depuis quelques années maintenant.
J'utilisais metapost avant qui a une syntaxe un peu plus lourde.
Je suis vraiment très satisfait d'asymptote. On a très facilement et
rapidement de superbes figures en eps.
bien cordialement,
Marc
Le jeudi 01
Hi
is it possible to have in a frame [allowframebreak] an overprint
environment?
If yes - how? In my presentation, it is only printing the first slide of the
overprint.
Cheers,
Rainer
--
Rainer M. Krug, PhD (Conservation Ecology, SUN), MSc (Conservation Biology,
UCT), Dipl. Phys. (Germany)
Dear all,
as I'm at the beginning of a document preparation process I do not want to
decide right now how to decorate vectors, tensors and so on.
For this reason, I chose math macros since at the end of the preparation
I can change the decorations easily by editing only the macro.
I typed in
On the Web site I see that version 1.6.4.1 was recently released. Yet when
I went to download that version to upgrade from 1.6.3 the only available
.bz2 file was 1.6.4. Are these the same version or is 1.6.4.1 found
elsewhere?
Rich
hello,
I created a PDF-presentation with LyX. The handout is done, but now I
want to spice it up a little. I searched for documentation, but couldn't
find something about
- the Overlays Pause, Überdruck, Überlagerungsbereich,
Ausblenden and Nur and how to use them... Can s.o. tell me how
On 10/13/2009 03:19 PM, Nico wrote:
hello,
I created a PDF-presentation with LyX. The handout is done, but now I
want to spice it up a little. I searched for documentation, but
couldn't find something about
- the Overlays Pause, Überdruck, Überlagerungsbereich,
Ausblenden and Nur and
Le 13 oct. 09 à 19:57, Rich Shepard a écrit :
On the Web site I see that version 1.6.4.1 was recently released.
Yet when
I went to download that version to upgrade from 1.6.3 the only
available
.bz2 file was 1.6.4. Are these the same version or is 1.6.4.1 found
elsewhere?
1.6.4.1 is a
On Tue, 13 Oct 2009, Jean-Marc Lasgouttes wrote:
1.6.4.1 is a mac-only emargency update. 1.6.4 is the latest for the rest
of us.
JaMrc,
Ah, so! I didn't see that on the Web site.
Thanks,
Rich
--
Richard B. Shepard, Ph.D. | IntegrityCredibility
Applied
hello rh,
thanks for the very quick answer! Thanks to your hint, I could solve the
second problem... I tried that before, but didn't close the ERT-box, so
it didn't work...
I looked at the beamer template but couldn't find an environment like
the ones I mentioned. Are you shure that this
On Tue, 13 Oct 2009, Nico wrote:
I looked at the beamer template but couldn't find an environment like the
ones I mentioned. Are you shure that this overlays are documented in this
template?
Nico,
On my system, when I open a beamer-class file, or opt for a new one
(File-Open from
On 10/13/2009 04:07 PM, Nico wrote:
hello rh,
thanks for the very quick answer! Thanks to your hint, I could solve
the second problem... I tried that before, but didn't close the
ERT-box, so it didn't work...
I looked at the beamer template but couldn't find an environment like
the ones I
Hi, I am attempting to write a thesis using LyX, and have a few
questions. I have Googled extensively, but can't seem to find the
answers. I am using the report class.
1. How do I get the page numbers to continue in the abstract? The
abstract is the third page in, and appears to reset the
Dear Lyx users,
I have a document with a rather large table full of text, and I need to
reduce font size and select an appropriate paragraph spacing for the cells'
text. Changing font size is no problem, but I am having trouble controlling
the interline spacing (the leading space). I
* Sajjad wrote, On 12/10/09 14:08:
Hello forum,
I want to write pseudo-code and i am doing that inside the program listing.
But when i generate the pdf , the code are cropped sideways.
Any hint to get around that issue?
Regards
Sajjad
Luca Carlon wrote:
> > Ahh. You are indeed correct. I can verify that the table over-runs
> > the page margins. I suspect that this may be a LaTeX problem rather
> > than a LyX problem, but the LaTeX gurus on the list would need to
> > verify that.
>
> So, should I report the bug or
James C. Sutherland writes:
>
> Ahh. You are indeed correct. I can verify that the table over-runs
> the page margins. I suspect that this may be a LaTeX problem rather
> than a LyX problem, but the LaTeX gurus on the list would need to
> verify that.
So, should
Jürgen Spitzmüller writes:
> This is no bug at all. The width of your 4 cells alone make 100% textwidth.
> But then, there's also the space between the columns (\tabcolsep) and the
> width of the lines, which will be added to the width.
>
> Jürgen
There is something I don't
Luca Carlon wrote:
> There is something I don't understand here... There is no space between the
> columns. Only a line of less than a mm. If you intend that the space
> between the columns is used so that the text inside the cells doesn't
> touch the border, then
The cell width is the width
Olivier Ripoll writes:
> First, congratulations for the work to the translation team.
> A few comments / corrections (mostly minor)
Thanks for finding these typos, they are corrected.
--
Jean-Pierre
Bonjour,
j'utilise asymptote de temps à autre depuis quelques années maintenant.
J'utilisais metapost avant qui a une syntaxe un peu plus lourde.
Je suis vraiment très satisfait d'asymptote. On a très facilement et
rapidement de superbes figures en eps.
bien cordialement,
Marc
Le jeudi 01
Hi
is it possible to have in a frame [allowframebreak] an overprint
environment?
If yes - how? In my presentation, it is only printing the first slide of the
overprint.
Cheers,
Rainer
--
Rainer M. Krug, PhD (Conservation Ecology, SUN), MSc (Conservation Biology,
UCT), Dipl. Phys. (Germany)
Dear all,
as I'm at the beginning of a document preparation process I do not want to
decide right now how to decorate vectors, tensors and so on.
For this reason, I chose math macros since at the end of the preparation
I can change the decorations easily by editing only the macro.
I typed in
On the Web site I see that version 1.6.4.1 was recently released. Yet when
I went to download that version to upgrade from 1.6.3 the only available
.bz2 file was 1.6.4. Are these the same version or is 1.6.4.1 found
elsewhere?
Rich
hello,
I created a PDF-presentation with LyX. The handout is done, but now I
want to spice it up a little. I searched for documentation, but couldn't
find something about
- the Overlays "Pause", "Überdruck", "Überlagerungsbereich",
"Ausblenden" and "Nur" and how to use them... Can s.o.
On 10/13/2009 03:19 PM, Nico wrote:
hello,
I created a PDF-presentation with LyX. The handout is done, but now I
want to spice it up a little. I searched for documentation, but
couldn't find something about
- the Overlays "Pause", "Überdruck", "Überlagerungsbereich",
"Ausblenden" and
Le 13 oct. 09 à 19:57, Rich Shepard a écrit :
On the Web site I see that version 1.6.4.1 was recently released.
Yet when
I went to download that version to upgrade from 1.6.3 the only
available
.bz2 file was 1.6.4. Are these the same version or is 1.6.4.1 found
elsewhere?
1.6.4.1 is a
On Tue, 13 Oct 2009, Jean-Marc Lasgouttes wrote:
1.6.4.1 is a mac-only emargency update. 1.6.4 is the latest for the rest
of us.
JaMrc,
Ah, so! I didn't see that on the Web site.
Thanks,
Rich
--
Richard B. Shepard, Ph.D. | IntegrityCredibility
Applied
hello rh,
thanks for the very quick answer! Thanks to your hint, I could solve the
second problem... I tried that before, but didn't close the ERT-box, so
it didn't work...
I looked at the beamer template but couldn't find an environment like
the ones I mentioned. Are you shure that this
On Tue, 13 Oct 2009, Nico wrote:
I looked at the beamer template but couldn't find an environment like the
ones I mentioned. Are you shure that this overlays are documented in this
template?
Nico,
On my system, when I open a beamer-class file, or opt for a new one
(File->Open from
On 10/13/2009 04:07 PM, Nico wrote:
hello rh,
thanks for the very quick answer! Thanks to your hint, I could solve
the second problem... I tried that before, but didn't close the
ERT-box, so it didn't work...
I looked at the beamer template but couldn't find an environment like
the ones I
Hi, I am attempting to write a thesis using LyX, and have a few
questions. I have Googled extensively, but can't seem to find the
answers. I am using the report class.
1. How do I get the page numbers to continue in the abstract? The
abstract is the third page in, and appears to reset the
Dear Lyx users,
I have a document with a rather large table full of text, and I need to
reduce font size and select an appropriate paragraph spacing for the cells'
text. Changing font size is no problem, but I am having trouble controlling
the interline spacing (the leading space). I
57 matches
Mail list logo